Harbor Freight Coupon Thread

Quote from Trainguy9643 : Via e-mail

Weird. I didn't get one.

Then again, I don't have a lot of faith in the HF website's ITC setup as I can't log in correctly to see ITC while logged into my regular "ordering" account. If that makes any sense.

[QUOTE=danrod963;36300247]I got the $59 jack a month ago. No major complaints, gets my car up for tire rotations and oil changes a lot faster than the old mini 2ton jack I have. Its on the site, but listed as an in-store item only. The jack is only rated for 1.5 tons, so I wouldn't recommend using it on anything huge. (check the reviews a couple people claim its tough enough to use on a truck but I wouldn't chance it). I do have to say the front "drum" wheel is pretty annoying, makes it kinda hard to maneuver the jack.

http://www.harborfreight.com/3000-lb-capacity-lightweight-aluminum-racing-jack-91039.html[/QUOTE]
I tried the $59.00 Aluminum Jack. I would be a great jack and I would have kept it if the front wheel was regular wheels ,but the Single wide front roller made it real hard to place it under the car just to low to the ground and if there is any small pebbles, it's makes it even harder.
So I took it back & got there 3 Ton Capacity Low Profile Floor Jack it weighs more but it's a far better jack the only down side is it will not get any lower than 5 1/8" were the Aluminum 1 will lower to 3 1/8".
Even with that, truefully there 3 Ton Capacity Low Profile Floor Jack is the 1 I would get, I paid $79.00 for mine 2 years ago. But I posted a coupon for $49.99 it has to be used by the 1-16-11 .
http://www.harborfreight.com/3-ton-capacity-low-profile-floor-jack-94629.html

Wow I just now noticed that jack did not have wheels up front :-/ that's odd I don't think I seen other jacks like that before.

wow that jack you got with the wheels is really almost 80 lb?

Quote from Photoguy : I bought my membership in store, so I don't know. But in December they were running the "get a $10 GC" thing. So that would be my guess.

HF was giving 10 dollar gift cards when I re-newed my ITC membership in December of 2010. Turn the card over, dial the phone number and enter the card number and a "voice" will tell you if the card has any value left on it.

Quote from SubaruB4 : Wow I just now noticed that jack did not have wheels up front :-/ that's odd I don't think I seen other jacks like that before. wow that jack you got with the wheels is really almost 80 lb?

I thank its has something to do with racing with the wheel.
I have never weighed it but i would say it's a lot closer to 50 or 60 pounds myself. But even at 80 pounds its still a far better jack.
The $59.00 1 did an OK job on cars but I just did not do a good job with my 1 ton truck and the Low Profile Floor Jack goes under a most small cars as well as my truck. I thank there $26.00 jack did a better safer job jacking up my truck than the $59.00 1 did. And it's only 26 pounds and only $26.00
http://www.harborfreight.com/2-to...66725.html

My HF store will not apply 20% coupon on compressors.
The cashiers' computer rejected the coupon. And then the cashier pointed me to a post that says 20% cannot apply to compressors and other 4 or 5 things. That post is called in store coupon correction notice, or something.

Is that one store thing, or pretty much implemented everywhere?
Anyone successfully used 20% on compressors?

Quote from guoyingzi : My HF store will not apply 20% coupon on compressors. The cashiers' computer rejected the coupon. And then the cashier pointed me to a post that says 20% cannot apply to compressors and other 4 or 5 things. That post is called in store coupon correction notice, or something. Is that one store thing, or pretty much implemented everywhere? Anyone successfully used 20% on compressors?

That's pretty much every store. Sometimes you may get lucky but thats the only way.

Hello to all, just joined the site and am new to Harbor freight, as, the nearest store is 90 minutes away. I bought the 90 amp flux wire welder and auto darkening helmet with coupons and I love that thing, anyways, does anyone know if there is a coupon on belt sander( #2485 I think). looking forward to contributing to the thread in future days thanks , tim

Anyone know about powder coating and if this 30,000 BTU heater will work for the paint?

67856

I have a gas oven and it's not good for that.

Quote from tidetim : Hello to all, just joined the site and am new to Harbor freight, as, the nearest store is 90 minutes away. I bought the 90 amp flux wire welder and auto darkening helmet with coupons and I love that thing, anyways, does anyone know if there is a coupon on belt sander( #2485 I think). looking forward to contributing to the thread in future days thanks , tim

If you are net to HF Then let me say welcome . I am lucky enough to have 3 that opened up about 2 years a go with in 20 miles the closes 1 5 miles. Love them every since.
But until December of last year . I did not know about there IT Club(Insider Track Club), it will cost you $30.00 for a year . But the saving are unbeatable, I save the $30.00 the first tim I used it I could be wrong I don't thank they have 1 on sell this month but next that my . I just wished someone would have told me about there Club 2 years ago.Happy savings. And check the post here there are several coupons if there is 1 they will be hear. In most cases. you will even see some of the ITC coupons Hear

I wish I had store closer but the nearest one is in Huntsville Alabama, which is 90 minutes away

Quote from samuelpaxton : If you are net to HF Then let me say welcome . I am lucky enough to have 3 that opened up about 2 years a go with in 20 miles the closes 1 5 miles. Love them every since. But until December of last year . I did not know about there IT Club(Insider Track Club), it will cost you $30.00 for a year . But the saving are unbeatable, I save the $30.00 the first tim I used it I could be wrong I don't thank they have 1 on sell this month but next that my . I just wished someone would have told me about there Club 2 years ago.Happy savings. And check the post here there are several coupons if there is 1 they will be hear. In most cases. you will even see some of the ITC coupons Hear

I was wrong with the IT Club they have a
3" x 21" Industrial Variable Speed Belt sander for $39.99 regular $59.99 check the post below for the ITC coupon
http://www.harborfreight.com/3-inch-x-21-inch-industrial-variable-speed-belt-sander-94748.html

Quote from michvhf : Check out 0211 Retail A. There's a "SPECIAL OFFER" in a yellow section for ITC. The $10 GC is offered.

Thanks for tell me about it I have 2 friends they wonted to get the membership. Thay can at least get $10..00 back makes it even more Worth the membership fee

save 10% off non excluded items online right now using code SAVE10