Lancer L5AWM30 30 Round 5.56X45mm Magazines - $15.25ea or Buy 3 Get 1 Free - Free Shipping from Botach Tactical

Botach Tactical [botachtactical.com]: Just picked 4 of these up (buy 3 get 1 free) and the total came out to $45.75...or $11.44 per mag with free shipping. Four colors are available (Black, Olive-Drab, Dark-Earth, Foliage Green).

Product Description from website:

The L5 AWM is a hybrid magazine that combines the best features of polymer and steel magazine designs. Unique to the AWM is the one piece wrap-around hardened steel feed lip assembly that is permanently attached to an impact resistant polymer body. The hardened steel feed lips won’t bend, break or deform due to rough handling or long term storage. An aggressive surface texture has been applied to the polymer body to improve gripping and retrieval from pouches. The combination of steel and polymer result in a lightweight, robust magazine tough enough for professional use.

The internal geometry of the Advanced Warfighter Magazine is a constant curve that has been maximized to feed the 5.56X45mm NATO round and has a non-tilting follower for trouble-free feeding. The feed lips are made from a single piece of precision formed steel that is hardened, then PTFE coated for corrosion resistance. The body and component materials are corrosion and chemical resistant, passing military chemical testing, including exposure to DEET

The L5 AWM is compatible with modern weapon systems; M4/M16/AR, HK416, SCAR-L / Mk16, and the ARX160 to name a few, and is available in 20-and 30-round capacity with a translucent or opaque polymer body.

Material Specification
Body Assembly: Nylon
Feed Lips: AISI 1074 Carbon Steel, .030in thick, Hardened to Rockwell C scale 48 to 52. Coated with a corrosion resistant PTFE coated
Floor Plate: Nylon
Floor Plate Lock: Nylon
Spring: Stainless steel 17-7ph, wire, corrosion resisting, type 631, ASTM A313 precipitation heat treat after forming to condition CH900, Hardness – 84.5 HR15N equivalent min, Finish – 5.4.1 of MIL-STD-171
Follower: Delrin
Weight: 4.4oz

Operating Temperature
High Temperature Testing: +180F, storage and drop testing. Firing testing has exceeded +300F Low Temperature Testing: -40F, firing, storage and drop testing.

Operational test procedures in general accordance with
ITOP 4-2-602 – Rough Handling 1-5 samples of each of the magazines were subjected to a 10 drop sequence at temperatures ranging from 160°F to -40°F / -80°F (halo) at height of 5ft (1.5meters) onto ¾” plywood backed by concrete, a new magazine as well as any Magazines that passed the plywood test would then be subjected to another 10 drop sequence on concrete only.
TOP3-2-045 - Reliability and durability, High and Low operating temperatures, Dust, Long term storage
TOP 3-2-609 Chemical Compatibility

Cleaning solvents / lubricating oils tested with no adverse effect:
Carbon Removing Compound (CRC)
WD40
Gunzilla
Hoppes No. 9
Militec
CLP/Break-Free
Cleaning Compound, MIL-l-372B

Chemicals tested with no adverse effect:
Insect Repellents Containing DEET
Gasoline
Kerosene
Diesel fuel (high/low sulfur)
Turbine fuel
Dry cleaning solvent P-D-680
Lube Oil, VV-L-800 oil
Hydraulic Oil, MIL-H-5606
Anti-freeze, MIL-A-46153