Users like you have given feedback on this thread:
To give your opinion, vote using the thumbs above.
To give your opinion, vote using the thumbs above.
80% | ||
7% | ||
13% |
Share this thread on the web:
Share this thread by Email:
Click here
del.icio.us
StumbleUpon
Google Bookmarks
Technorati
reddit |
Yahoo! My Web
Facebook
AOL IM
|
Share this thread by Email:
Click here
Belkin Play N600 HD Wireless Dual-Band N+ Router - F7D8301 for $34
Belkin Play N600 HD Wireless Dual-Band N+ Router - F7D8301
Was $2 cheaper last week. I have one using as a wireless bridge. Instruction here http://slickdeals.net/permadeal/7...600f7d8301 to running tomato. It's also dd-wrt compatible
http://www.buy.com/prod/belkin-pl...d=24014914
You do get 10% ($3.40) in Rakuten Points for use later. You have to Opt-in (Thanks FerSureMaybe)
Edit: Follow the instruction in the link above to install dd-wrt or tomato on the router. It's only missing on how to do a 30-30-30 reset. Here's the instruction:
Hard Reset (aka 30/30/30 reset):
The following procedure will clear out the NVRAM and set dd-wrt back to default values:
With the unit powered on, press and hold the reset button on back of unit for 30 seconds
Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
Plug the unit back in STILL holding the reset button a final 30 seconds (please note that this step can put Asus devices into recovery mode...see note below!)
This procedure should be done BEFORE and AFTER every firmware upgrade/downgrade.
Was $2 cheaper last week. I have one using as a wireless bridge. Instruction here http://slickdeals.net/permadeal/7...600f7d8301 to running tomato. It's also dd-wrt compatible
http://www.buy.com/prod/belkin-pl...d=24014914
You do get 10% ($3.40) in Rakuten Points for use later. You have to Opt-in (Thanks FerSureMaybe)
Edit: Follow the instruction in the link above to install dd-wrt or tomato on the router. It's only missing on how to do a 30-30-30 reset. Here's the instruction:
Hard Reset (aka 30/30/30 reset):
The following procedure will clear out the NVRAM and set dd-wrt back to default values:
With the unit powered on, press and hold the reset button on back of unit for 30 seconds
Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
Plug the unit back in STILL holding the reset button a final 30 seconds (please note that this step can put Asus devices into recovery mode...see note below!)
This procedure should be done BEFORE and AFTER every firmware upgrade/downgrade.














