Everlast PowerTig 250EX AC DC TIG ARC PULSE WELDER 250 amp 1425.00 shipped - DEAD

PowerTig 250EX:

PowerTig Series CC Inverter: 250 Amp AC/DC Pulse TIG /200 Amp DC Stick Welder
Processes: GTAW-P, SMAW

IMPORTANT PRODUCT NOTES: The PowerTig 250EX is capable of operating on either 240V single phase or 240V three phase power. Capable of low-amp, soft starts in both AC and DC modes. Amps are adjusted on the panel while used with a foot pedal. Because air-cooled TIG torches are limited generally to 200 amps, Everlast includes a water cooled torch with the PowerTig 250EX. Operating torch "dry" will damage the torch. Water cooler use is strongly recommended.

Features & Benefits
- Stable and smooth starts with exclusive "Easy Start" 5 amp start for AC and DC low amp operation (+/- 2 A).
- Portable and lightweight for use in almost any setting.
- Fully adjustable weld parameters for 2t/4t remote operation.
- High Pulse Frequency capability (.5-500Hz) reduces overall heat input for premium weld quality, without burn through or warping.
- 12 ft. Economy WP 18 series torch with DINSE 35/70 style connectors and quick connect gas fitting for fast setup.
- Built-in 240V receptacle specially designed for use with the Everlast PowerCool 300 Water-cooler.
- Expanded AC cleaning range offers the most adjustability in its class for optimum aluminum welding performance.
- Digital display for precise setting of amperage.
- Color coded controls are easy to find and understand.
- Arc Force Control for Stick use helps reduce spatter, and improve arc quality and performance.

NOTE: For generator use, this welder requires a MINIMUM of 11,000 watts of continuous output with a generator designated as "clean power" output by the generator manufacturer. May require a larger generator for best performance. Use with generators not rated as clean power may void warranty.

Recommended Areas Of Use
- Welding Repair
- Motorsports/Automotive- Construction/HVAC
- Commercial/Industrial maintenance
- Fabrication/machine shops
- Shipyard/pipeline
Home/Hobby/DIY
Ranch/Farm/Agricultural
Gun Smiths
Standard Equipment
-12 ft Economy WP 18 series water-cooled TIG torch with cable (Must use water system with torch! Water cooler purchase is highly recommended)
- Work clamp with cable
- SMAW electrode holder(Stub type, subject to change.)
-6 ft power input cable (Does not include plug. Must be supplied by customer and matched to 1 or 3 phase application.)
- Argon regulator
- Consumable starter pack (Does not include Tungsten.)
- Foot Pedal
Optional Equipment
- Water cooler(strongly recommended)
- Welding cart
- Welding helmet
- Consumable kit
- US built foot pedal (Available as separate purchase only. Not available as a substitution for standard foot pedal.
- Deluxe WP 9,17,18,20, or 26 series flex-head torches includes connectors and remote switch. 15 or 25 ft. (Must purchase separately, not available for substitution.)
- NEW! 17 SERIES FINGER AMP CONTROL TORCH. 15FT. CHECK AVAILABILITY.
Recommended Metals
- Steel
- Aluminum (PowerTig Series only)
- Stainless Steel
- Titanium
- Copper/nickel alloys
- Virtually all metals, ferrous or non ferrous.