|
|||||||
|
Just curious is it still valid on a fufilled by amazon order?
|
| 02-05-2013, 07:37 PM | |
|
|
|
I got one on the Black Friday deal (still waiting for rebate).
I tried to set it up using as a wireless access point using stock firmware, but had many issues. As soon as I flashed gargoyle on it, everything worked flawlessly. The flash was super-easy. I highly recommend putting gargoyle on this router. Range and signal strength is much better than the Cisco E4300 I was using previously. I'm happy with it and would buy it again, especially for the price. I couldn't find anything close to it in this price range. |
|
I tried stock, DD-WRT and OpenWRT with the N600 version. OpenWRT wroked best for my wireless. stock and DD-wrt would lose my 5G band and my phone wouldn't connect to 2.4 N on DD-WRT. Also router would drop connetion when doing large downloads 30 -40 GB from internet. So far OpenWRT has been the best. Both bands have been solid and no drops during large downloads. |
|
|
I picked this router up when it was posted for 40 after rebate. Posting my personal experience with it thus far.
Configuration-wise, there are a few interesting things about it. For starters, you can rename the admin account, along with the usual setting your own password. This is a good security point since it eliminates the admin account attack vector. The router also features dynamic DNS and NTP support but it may not work in unique networking scenarios like mine (internet to FiOS router/modem to N750). Be aware that if you want to set a lot of options or turn things on or off, you're going to have to prepare some added time as many of the settings, including basic ones like wireless SSID, SSID broadcast, protocol mix (n-only, g-only, b-only, mix), will have you rebooting the router countless times just to have it all set up. Prepare a cup of tea before you start setting up the router. There seems to be an issue with WDS on the initial firmware. There is a new version out at this time but I have yet to test it. The issue lies in maintaining a WDS connection as the initial setup would result in the two devices seeing each other but then dropping out after a few hours (give or take). I have reported this to their tech support staff and they are aware of the quirk. The secondary device was a Linksys WRT54G v3 hardware running Tomato. It's unknown as to where the problem lies but a power-cycle of the Linksys device did not solve the WDS connection issue. Only a reboot of the N750 rectify the problem but temporarily. Your mileage may vary if you seek to use WDS in your setup. If upgrading the firmware, be prepared to re-set all your options and settings, along with having to access the device from its default IP, username, and password. This quirk freaked me out as it made me thought I had bricked it. But it wasn't so since basic network traffic was still going through. I later confirmed the upgrade did work but all settings reverted to default when I peeked on my phone's wireless network list and seeing the default SSID name on it. Signal strength on the 2.4GHz band seems pretty good, as I was able to maintain a connection with the phone and Nexus 7 in my room (2nd floor) while the N750 sits in the living room (1st floor). The 5GHz band, though, has issues with passing through walls and objects. I guess that's to be expected. Should be no problem if using 5GHz while on the same floor. Wired connection seems pretty good... and while the network cables I used for the desktop PCs are not certified for gigabit connection, it somehow worked right off the bat. I haven't tested file transfers on it yet but I doubt I'll do the test any time soon. |
|
assuming that you're using standard four pair network cable, it should be gigabit ready. I get gigabit connections on cat 5e leftover from a project 15 years ago (dated on the cable from 1997) The truth: Management at IRS can blame themselves and how they have chaotic and poor management, but God-forbid you, or I, or anybody else in America gets audited and doesn't have their ducks in order and s***-together, your ass is going to court or jail.
Shout out to Congressman Mike Kelly for stating it as it is... Link [realclearpolitics.com] |
||
|
Best Slickdeal of my SD life:
Panasonic 54" G10 from Sears: $753 including tax |
|
|
"Someone sent me a suggestion to try setting the WPA to just TKIP which I had thought I had done before but apparently not. WPA2 Personal Mixed + TKIP now lets my Xbox 360 connect and get an IP and gain access to the internet." + "Regarding the Xbox 360 I found a slight work around to get it working instead of making a new virtual wireless network. If you take and set it to TKIP and then connect the Xbox to the network you can take and set it back to TKIP+AES after successfully connecting. It seems the Xbox will remember to keep using TKIP after the first successful connection. " |
|
|
|
||||
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Refurbished: NETGEAR WNDR4000-100NAR N750 Wireless Dual Band Gigabit Router $70 | Selma | Hot Deals | 3 | 01-26-2013 08:16 PM |
| TP-Link N750 Wireless Dual Band Gigabit Router-$39.99 | tarle | Hot Deals | 25 | 11-28-2012 07:16 PM |
| TP-LINK TL-WDR4300 N750 Wireless Dual Band Gigabit Router $69.99, Refurbished: Linksys WRT120N-RM 802.11b/g/n Wireless Home Router $14.99 | Selma | Hot Deals | 0 | 10-18-2012 01:38 AM |
| Refurbished: NETGEAR WNDR4000-100NAR N750 Wireless Dual Band Gigabit Router $70, Refurbished: NETGEAR WNR2000-100NAR N300 Wireless $20 | Selma | Hot Deals | 5 | 08-07-2012 12:11 PM |
| Refurbished Netgear WNDR4000 (N750) Wireless Dual Band Gigabit Router $79.99 @eBay | deelseaker | Hot Deals | 6 | 05-02-2012 02:21 PM |