|
|||||||
|
Anyone that cares - setting up an exchange/refund is quick and painless..
Have a scheduled fedex delivery for tomorrow.. once they receive and inspect I should have another one sent out.. I opt'd for the fedex/exchange route since the Husky svc centers are not close to me.. |
| 02-25-2013, 02:01 PM | |
|
|
|
|
|
|
For anyone else who happens to have a similar issue with any of these gas powered machines. My hedge trimmer arrived fine but ran and idled poorly. Attempted to adjust the carb high and low screws and found that Poulan has a special tool needed to do this. Another quick search yielded a suggestion to cut a notch in both adjustment screws using a dremel. Had to take the carb off to make room to get the dremel in, but after 5 minutes work I had notches in both screws. I played with the carb for 20 mins or so and have it running perfect now. Low screw is about 1.5 turns out, high seems to like 2.5. Hope this helps someone and keeps them from sending the tool back.
|
| Thread Tools | Search this Thread |
|
|