GearWrench 7 pc XL Flex Ratcheting X-Beam Wrench Set (Standard or Metric) $55 AC (reg. $100) + Free Store Pickup ~ Sears

Sears has the GearWrench 7 pc XL Flex Ratcheting X-Beam Wrench Set (Standard or Metric) for $55 after applying code SEARS2013. Store pickup is free or have it shipped free if you have SYWM.Signup for the free 90 day trial here [sears.com].
Orders over $75 use SEARSTOOLS for $10 off.

Standard [sears.com]

Metric [sears.com]

Product Description (Standard)

Ratcheting Wrench Set: For Tight Places and High Torque
Not just any standard wrench set, this seven piece combo combines the fast grip and easy reach of an open ended wrench with the speed of a ratchet and flex of a crow’s foot to give you torque in the tightest of spaces. Whether you’re reaching for an oil plug, fine tuning a distributor cap or stretching for a starter mount, this set of wrenches will deliver both speed and power to the tightest corners of any engine compartment. A solid base for garage work, each tool is built tough, versatile and will always be ready to help you get the job done.
Covering a range of sizes from 3/8 up to 3/4 inch, this set delivers seven wrenches that are essential for light and medium duty applications, from torquing carriage and lag bolts to under the hood maintenance. Crafted from polished, alloyed steel and built to last, this Ratcheting Wrench Set wipes clean job after job, for solid service you can count on. Toss this set in your tool box for a grip that will help you get the job done, at any angle.

• Sizes: 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., and 3/4 in.
• The ratcheting standard wrench set needs as little as 5 degrees of sweep vs. 30 degrees of a standard box end wrench
• Surface Drive Plus® provides a stronger grip on fasteners while reducing rounding by directing pressure to the strongest part of each fastener
• Fully hardened for tough torquing durability
• Slim head design allows access into small spaces
• Up to 25% longer than a standard GearWrench ratcheting wrench for more muscle and reach in every turn
• Ratcheting box end flexes 180 degrees with continuous tension control so you can move without losing your grip
• Warranty: Limited lifetime

Product Description (Metric)

A Ratcheting Wrench Set that Fits in the Tightest Spaces
A solid addition to any mechanic’s chest, this Metric Wrench Set reaches deep into tight areas turning nuts and bolts with as little as 5 degrees of sweep. Tough enough to rebuild that old engine or perform necessary modern car maintenance, this wrench set puts a unique twist on every turn. Featuring the patented X-Beam Design, coupled with a longer reach, each millimeter of these wrenches provides the accessibility and strength that will make even the toughest jobs turn out fast.
Whether you’re mounting a dual barrel Holly to a muscle car, or swapping out starters on mom’s minivan, this set of wrenches delivers a tough torquing design that works in tight and open areas while meshing the adaptability of crow’s foot wrench with the convenience of a tough ratchet. A solid set that covers the range from 8 to 13 millimeters, it’s the perfect addition to any tool box. Add this Ratcheting Wrench Set to your kit, and get to work in places other wrenches just can’t touch.

• Metric Wrench Set includes sizes: 8mm, 10mm, 12mm, 13mm, 14mm, 17mm and 19mm
• The needs as little as 5 degrees of sweep instead of the 30 degrees needed by a standard box end wrench
• Surface Drive Plus® provides a stronger grip on fasteners while reducing rounding by directing torque to the toughest part of each head
• Fully hardened for superior strength and durability
• Slim head design allows access into small spaces while the 25% longer design puts more might into each turn
• Ratcheting box end flexes 180 degrees with continuous tension control for serious grip at over a hundred angles
• Warranty: Limited lifetime