Foscam FI8910W $69.99 w/ Free Shipping via Amazon

List of video surveillance software [cocoontech.com] for IP & USB cameras.

Highly recommend Vitamin D if motion without false positives is important to you, iSpy if you want a free but powerful solution, or Blue Iris for a good balance between all fo the above.

For iPhone and ipad users check out icam it's awesome and you can set the motion detection to upload to your Dropbox.


Steps for Setting Up Port Forwarding to View Your Foscam Over the Internet!!
Step 1) Write down the local IP address of your camera. To find this address open IP Camera Tools (apple mac users, use IP Scanner Tool) and it will display the IP address of the camera as “h**p://[YourCamerasLocalIPAddress])

Step 2) Log into your camera and goto the “Basic Network Settings” and change the HTTP Port to 8090. At default the port is at port 80, however this is a public port and used too often and in the majority of cases can cause problems. We here at Foscam recommend users to use port 8090 as it is a generally unused port and safe to use. (If you have more than one camera then they should ascend accordingly ex. 8091, 8092..)

Step 3) Next write down your router’s external internet IP address. The easiest way to find this would be to Google “What is my IP address” and go to the first link which pops up and that is usually whatismyipaddress.com. This address is your routers identity viewed from the rest of the world. If you want to be able to access your camera from anywhere other than the cameras home location, you will need this address handy.

Step 4) Log in to your wireless router. To do this you must enter the IP address of your router into your browser and then enter the username and password when prompted. If you are unsure of the ip address or username and password of your router, refer to your router’s manual or view a list of default router IP addresses, usernames and passwords by visiting our collection here.

Step 5) Go through the options on your router until you find an option that says “Virtual Server”, “Port Forwarding”, or “Port Mapping” (if you have your routers manual, it should explain this as well). Once you are able to access your Port Forwarding options you need to set the the Local/Private IP address to your camera’s local IP address, set the inbound port to 8090 and the outbound port to 8090 (you can change the port numbers later). Make sure the type is either “Both” or “TCP”. Save the configuration.

Port Forwarding

Step 6) To test it to see if you set it up correctly, open a browser and enter your external internet ip address into the address bar and press enter. You should arrive at your camera’s login screen.