The hottest deals voted on by our community.
Selected and verified by our team of deal editors.
These deals are currently popular in the
community based on votes and comments.
See whats coming up this
contributed by our community. It's what makes
us different. Do you have a great deal to share
with the Slickdeals community?
and get notified when there is a price drop. You also
have access to graphs of recent price history.
community dedicated to sharing, rating,
and reviewing deals and coupons.
See the latest posts, threads, and ratings
as they happen with Slickdeals Live.
our Amazon Fillers tool to make sure your
cart qualifies for free shipping.
Find us, friend us, and connect with us across the web.
You last visited: Today at 11:14 AM
|Topic Review (Newest First)|
|02-12-2013 07:35 PM|
|02-12-2013 05:59 PM|
|02-12-2013 04:35 PM|
Just a quick update for everyone. I remembered I had some parts from a few pc's laying around here...found 2 sticks of 1 gig DDR and an AMD Athalon 64X2 Dual core processor 4200+
This is off a HP Pavillion slimline s3307.
Will that AMD processor work with my board? Wouold that give a decent performance boost?
Thanks for your helping!
|02-12-2013 03:33 PM|
|02-12-2013 10:29 AM|
|02-12-2013 07:33 AM|
DHC I completely understand your point about buying outdated ram for this but for me I think it makes sense to try some minor things like using an SSD and upgrading the processor. After that I'm pretty confident that this PC will be running much better.
Also this whole quest for an updated PC happened when I tried to install windows 8 on this machine and was unable. Looking at my system specs though I don't see any reason why I should not be able to install W8 correct? I have seen a number of issues with installing W8 but I will post another thread on that when the time comes.
Once again I can't thank the community enough for all your help on this. This is a great website with great people!
|02-12-2013 07:18 AM|
|02-12-2013 12:03 AM|
I would not waste any money on buying more old ram to put into your system.
I would start with just going out and getting a good deal on a new AM3+ motherboard that works with your current processor (as well as newest amd processors that you will upgrade to later on) With the new mother board, buy ddr3 1600 or higher ram to go along with it. 4gb if you are using win 7x32bit or 8gb if you have win 7 x 64bit running.
After you complete those steps, I would look into a new processor and than later on a SSD.
|02-11-2013 10:59 PM|
Simple part compatibility:
Motherboard and processor must have the same 'socket'. Examples are LGA1155, FM3, FM3+, etc. This is so the processor fits into the motherboard correctly, and the motherboard knows how to communicate with the processor (and vice versa).
The RAM must fit the motherboard (mobo, for short), but most RAM will say 'desktop' or 'laptop' ram to make it easy. Then, you have DDR2 and DDR3 ram as the most common types. Any new mobo will support DDR3 ram (and DDR2 as well), but older mobos only supported DDR2. I think DDR3 mobos are always backwards-compatible with DDR2 (aka a DDR3 mobo will always support DDR2) but don't quote me on that. Also, get 'non-ECC' ram.. ECC is for servers, which you're not building.
Video cards need to fit into a certain type of slot - PCIe, PCIe 2.0, PCIe 3.0 are the most common now. Check what slots your mobo has open, and if you have a compatible video card, then you're good. Some of the slots are backwards compatible, but check Wikipedia for your mobo's specific slots to make sure it can handle your video card. AGP is a very old standard, basically useless now, but you might occasionally see AGP cards around.
Hard drives (and SSDs) use SATA 2.0 or SATA 3.0 connections (aka 'Sata 3Gbps and Sata 6Gbps, which are the speeds that the 2.0 and 3.0 standards can handle, at maximum). I'm pretty sure they're backwards compatible, so you can use a 2.0 drive with a 3.0 connector (and vice versa) but you'll only get 2.0 speeds. Hard drives and SSDs also come in different sizes(which only matters for compatibility with your case), where 3.5" is the 'desktop' hard drive size, and 2.5" is the 'laptop' size. SSDs are usually 2.5", but most come with mounting kits so you can fit it into a 3.5" slot in your case (and most cases now have 2.5" slots for SSDs). I think some SSDs are 7mm, but generally those are more expensive. Don't quote me on that last part though, I could be crazy.
Other things to keep in mind-
1. Video card is the most important thing for games and most other graphics-intensive tasks. An i3 processor is enough power for gaming as long as you have a good video card.
2. Ram speed is not that important. DDR3 is a worthwhile boost over DDR2 ram, but don't pay more for faster DDR3, as it will not be a noticeable difference, and that money is better spent going toward a better processor or video card.
3. 8gb of ram is enough for most people. Unless you realllllly have a lot of junk open at once, or multiple graphics-intensive games, or do a ridiculous amount of video editing or something, 8gb should be fine. Then again, ram is cheap, so if you think you might want more than 8, 16 isn't a budget-buster. But you'll only notice that extra ram if you 'saturate' your current ram by having a lot of stuff open or programs that take up a whole lot of memory to run.
4. I'm tired, hope that helps .
|02-11-2013 09:22 PM|
|02-11-2013 07:53 PM|
Thanks Jeff and DHC. You guys have been way helpful.
DHC. Im not exactly near a microcenter but if I could get a much better PC for the prices you quoted I would totally make the drive. I'ts just difficult for me to judge a good deal when I don't know the difference between good and great.
Jeff I think your line of thinking will probably work best for my situation. I dont need this thing to be a beast I just want it to work pretty well. One question though. Max ram is 8 so wouldent It be better to get 2X2Gigs of ram bringing my total to 6?
Thanks both for your help
|02-11-2013 03:18 PM|
If you're going to buy new RAM, it might be more worthwhile to upgrade your motherboard and CPU as well. Buying DDR2 right now is not a good idea since you won't be able to use it in any future systems or upgrades. It has been out of production for years so the supply of it has dropped and prices have gone up. DDR3 is much cheaper in larger quantities. You can get 2x2GB (4GB) DDR3 for around $25 instead of paying the same amount for only 2GB of DDR2.
Here are some recent slickdeals that might have been good for you:
$37 CPU - Dead now
$19 AR motherboard - Microcenter in-store only
Do you live near a Microcenter? They have other good deals on CPU/Motherboard combos.
Also, who will be doing the work if installing the new parts. I an not yet convinced that you would be able to swap out a motherboard/CPU. It's not hard, but it just doesn't sound like you have any experience.
|02-11-2013 01:59 PM|
OMG yes - upgrade to 4GB first. 2GB is the absolute miminum required to run Windows 7 64, so that by itself will give you a speed boost. Combine that with an SSD and it'll be like you have a new computer.
For the RAM, yes, you have to match what you have already, which is DDR2. You have 4 slots on your MB, so you just need 2 more 1GB sticks to pop in there. And I would qualify your choice - you should buy the cheapest you can find that comes with a lifetime warranty.
Max for your board is 8GB , so you'll be fine with 4x1GB
|02-11-2013 01:37 PM|
|pickel182||Another super noob question. By upgrading the ram you are saying I should buy 2 new sticks of 1Gig ram to supplement the 2 I already have correct? I know some motherboards support more ram but I'm not sure what the max is for my board.|
|02-11-2013 01:34 PM|
|This thread has more than 15 replies. Click here to review the whole thread.|