You last visited: Today at 10:47 AM
|Topic Review (Newest First)|
|04-26-2013 11:11 AM|
|rich123||Rebate check came yesterday|
|04-19-2013 11:27 PM|
"Your check was mailed on April 16, 2013. Please allow approximately two weeks for delivery."
Looks like my rebate check should be here in the next couple of days. I mailed the rebate on March 8th so pretty quick turnaround.
Still haven't even opened the router box yet. To many projects, to little time.
rich123, Thank you for the link to the rebate status.
|03-17-2013 10:25 AM|
|03-09-2013 07:23 AM|
Anyone get rebate confirmation at http://www.rapid-rebates.com/Cont...earch.as
|03-04-2013 07:12 PM|
|02-23-2013 05:45 AM|
|laptopvaio||Did anyone run a throughput test?|
|02-23-2013 04:53 AM|
To clear up confusion about supported hardware versions, see the OpenWRT support information: http://wiki.openwrt.or
The latest Gargoyle is 1.5.9, which is built from OpenWRT Attitude Adjustment RC1. Attitude Adjustment RC1 supports this router's v1.10 hardware. Earlier OpenWRT builds do not support v1.10. Backfire 10.03.1 is known to brick this router.
So make sure you install Gargoyle 1.5.9 (or higher). This is the 1.5.9 firmware that I installed: http://www.gargoyle-router.com/do...actory.bin
I followed the instructions here: http://www.c2s.co.nz/blog/gargoyl...-wr1043nd/. Only change that I had to make was to rename the Gargoyle file to factory.bin before upgrading the router. For some reason, the upgrade didn't like the original file name (kept telling me to choose a file, when I had already chosen one).
|02-22-2013 03:35 PM|
I got v1.10
|02-22-2013 08:34 AM|
Gargoyle supports TP-Link TL-WR1043ND v1-1.8 Did anyone get theirs yet? If so, what version is it? (1.8, 1.9, 1.10 ...)
|02-21-2013 11:01 PM|
|swizard210||Damn, price went up...|
|02-21-2013 07:31 PM|
Or if for some reason I move back to Verizon then it will be of some use.
|02-21-2013 07:03 PM|
Without DSL that D-link unit becomes an interesting paperweight. It may be worth something to someone on ebay however!
|02-21-2013 05:36 PM|
Yes Zoom is only cable modem that's why I was looking for a router to go with it.
I am not sure whether D-link would work just as a stand alone router or not.
Any way now I have this router I will D-link just to see,if its works.
|02-21-2013 05:02 PM|
Gargoyle is a free OpenWrt-based Linux distribution for a range of Broadcom and Atheros chipset based wireless routers, mainly the older-model Linksys WRT54G (including the WRT54GL and WRT54GS), Asus Routers and Netgear WNR3500L. Among notable features is the ability to limit and monitor bandwidth and set bandwidth caps per specific IP address
|02-21-2013 04:34 PM|
What exactly is Gargoyle, is it a branch of open-wrt or is it some kind of new open firmware?
|This thread has more than 15 replies. Click here to review the whole thread.|