Agree that Tilt bracket does not work well if you don't want to tilt
i have this mount, worked very well in the bedroom for the 42'' plasma. well the angling, not so much... the tightening of the arms doesn't work all that well. but the TV is still up, so all good
I second your comment, especially the piece about the tilt not working well. On mine, I did not want any tilt, but if I tightened the holding screws too much, the plastic rail inserts that are supposed to hold it tight actually buckle inward and it falls forward and tilts. If I don't tighten it enough, obviously the weight of the TV causes it to tilt.
I solved the problem by inserting an extra nut/bolt into the gap so that it cannot tilt forward because the extra bolt is filling the slot. It still tilts a tiny bit, but it's acceptable.