View Single Post
#101
Old 01-28-2013, 07:17 PM
jhun_hapi jhun_hapi is offline
L3: Novice
  • Nov 2010
  • 250
  • 21 jhun_hapi is finding his bearings
  • 0
Quote from jskibo View Post :
Home Depot project.

Inch and a half galvanized pipe, it's threaded at both end and they will cut it for you. I had them cut it in half (can also use two inch black pipe if you like).

One pipe flange

Four 5/16th bolts, eight washers, four lock washers, four nuts

One of their one inch thick 18" round unfinished table tops (I added a 24" x 24" 3/4 play wood under it)

Two U-bolts

24" x 48" 3/4 plywood (I bought the whole sheet and had them cut it as I needed three)

Thin mount from monoprice.com

Cheap, easy to put together and easy to adjust....
Tnks.. Any pictures?

Quote from cdog90260 View Post :
from amazon poster vince johnson:
My Settings:

Picture Mode: Cinema
Contrast +97
Brightness +62
Color +61
Tint 0
Sharpness +10
Color Temp Normal
Color Management Off
C.A.T.S. Off
Video NR Off

And In Advanced Picture:

Block NR: Off
Mosquito NR Off
Black Level Light
3:2 Pulldown Auto

tnks for the settings

Last edited by jhun_hapi; 01-28-2013 at 07:18 PM.. Reason: Automerged Doublepost