Asus WL-520gU 802.11b/g DD-WRT Compatible Wireless Router w/ USB Print Server $32 after $20 MIR

[VorlonFrog]

Forgot to include pictures of the Samba share showing up on my laptop. You know, just to prove it REALLY (really!) works.

The first picture shows the shares (probably should remove those two Samba defaults) in Vista's Explorer. The second picture shows a text file I created inside a shared folder I created, both from my wireless laptop.

[VorlonFrog]

Quote from dzap : sigh..I still haven't figured out how to unbrick this..I installed dd-wrt many months ago but it got screwed up somewhere along the way..I remember I unbricked it more than once but I forgot the ip of it..damn..there has to be a way

Download the Angry IP Scanner from angryziber and have it scan your network. That'll find it.

Also, press the reset button and hold it in for thirty seconds while applying power to the router. If the CFE bootloader is loaded and running, it should read the reset switch and re-apply default values (including IP address) to the router.

[dzap]

Quote from VorlonFog : Forgot to include pictures of the Samba share showing up on my laptop. You know, just to prove it REALLY (really!) works. The first picture shows the shares (probably should remove those two Samba defaults) in Vista's Explorer. The second picture shows a text file I created inside a shared folder I created, both from my wireless laptop.

OMG you're killing me..that looks so HOTTTT That turns me on I've been wanting to do that for sooo long now

Quote from VorlonFog : Download the Angry IP Scanner from angryziber and have it scan your network. That'll find it.

will that work even though it doesn't assign one? I don't know..it's like there's a f/w on it but it's corrupted so I have to manually assign the right ip addy..

[mmzymxf]

When does the rebate come back?

[VorlonFrog]

Quote from dzap : OMG you're killing me..that looks so HOTTTT That turns me on I've been wanting to do that for sooo long now

Yeah, I shoulda done this weeks ago, but I've been too busy helping other folks get their printers working. Well, that and a week-long business trip to Los Angeles. Something about that Oracle database application I maintain with four million accounts in it.

Quote from dzap : Will that work even though it doesn't assign one? I don't know..it's like there's a f/w on it but it's corrupted so I have to manually assign the right IP addy..

If it's defaulting to a 192.168.1.xxx address, it should find it. If it doesn't, try two more things:
a) the reset switch as I mentioned above
b) download the Redboot.VBS script from the NSLU2 project. It's good for catching your router in situations like this, too. Instead of having it open a telnet window, change the command to perform the TFTP -i PUT command.

[VorlonFrog]

Quote from mmzymxf : When does the rebate come back?

Asus usually gets your rebate back to you in 4 to 6 weeks.

[VorlonFrog]

Here are mine:

[yazyazoo]

Vorlon,
I am still stuck at not getting the swap to show up. I tried to follow the step of the DDWRT wiki but am still stuck. I even tried to reformat the drive and reflash the router. I think I messed it up more. It seems as if the router or the harddrive has some configurations memorized. When I type dmesg I get a weird response. The three partions show but when I go to mount it gives me an error saying the /opt partition is busy. Also in the dd-wrt wiki they only mount the opt and mmc(data) partition. They don't mount the swap partition. Do you think that is why I couldn't get the swapon to work?

It would be great if you could make a custom wiki like the printer one specifically for this router with the three partitions in the dd-wrt wiki. I know you are busy but for some of us newbies this would help alot. I got my NSLU2 Unslung to work but this router has been giving me a headace.

How do you quote the dd=wrt wiki and post it onto your posts here. They always look so nice.

[VorlonFrog]

Quote from yazyazoo : I am still stuck at not getting the swap to show up. I tried to follow the step of the DDWRT wiki but am still stuck. I even tried to reformat the drive and reflash the router. I think I messed it up more. It seems as if the router or the harddrive has some configurations memorized. When I type dmesg I get a weird response. The three partions show but when I go to mount it gives me an error saying the /opt partition is busy. Also in the dd-wrt wiki they only mount the opt and mmc(data) partition. They don't mount the swap partition. Do you think that is why I couldn't get the swapon to work?

You never really actually mount a swap partition. When you use the swapon command, it tells Linux that partition is available for swap space.

Quote from yazyazoo : It would be great if you could make a custom wiki like the printer one specifically for this router with the three partitions in the dd-wrt wiki. I know you are busy but for some of us newbies this would help alot. I got my NSLU2 Unslung to work but this router has been giving me a headache.

The hardest part about doing that is that everyone has different configurations, and it's impossible to write something that will allow everyone to do it exactly the same. In my case, I have a USB hub attached to the router (there's no special work required to use a hub) so I can connect both my printer and the hard drive. Other people might want to add more than one hard drive for sharing. I'll see if I can put something together that might make it more straightforward. It will all be command-line examples, though.

Quote from yazyazoo : How do you quote the dd=wrt wiki and post it onto your posts here. They always look so nice.

I apply the FONT tag with the Courier New font to Linux commands and examples here. It just makes things easier to read (for me, anyway) so I include it in my posts.

[VorlonFrog]

Try this out, and let me know how it works for you...

================================================== ==========
I. FORMATTING YOUR DISK DRIVE
================================================== ==========

You must partition and format your hard disk drive somewhere other than your router. DD-WRT does not include the commands necessary to perform these functions. Use a Linux boot CD like Knoppix or Ubuntu on your computer. Restart your computer so it boots from the Linux CD.

1. After Linux boots, connect your USB hard disk drive.
2. Open a terminal window so you can issue Linux commands.
3. Use the command "sudo su -" to become root.
4. Find out what Linux named your USB disk with the command dmesg | more You're looking for a set of messages that include the name and a description of your hard disk drive. One line will say SCSI device sd? For the remainder of this text, replace sd? with the name of your disk. Here's an example of what you're looking for:

scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: WD        Model: 1600BEV External  Rev: 1.05
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi disk sdb at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)

5. Partition the disk using the command fdisk /dev/sd? You will be creating three partitions:
5.1) sd?1 - the /opt partition, where Optware will reside.
5.2) sd?2 - the swap partition, where Linux will swap jobs.
5.3) sd?3 - the data partition, which you will share via Samba.

It's important to understand everyone's disk drive configuration will be different. If your drive is 40 GB or smaller, use the smaller set of partition sizes below. If your drive is over 40 GB, you can use the larger set of partition sizes.

Disk 40 GB or less
---------------------
/opt 256 megabytes
swap 32 megabytes
data remainder of the disk

Disk greater than 40 GB
------------------------
/opt 512 megabytes
swap 64 megabytes
data remainder of the disk

# fdisk /dev/sd?
Command (m for help): p

Disk /dev/sd?: 64 heads, 63 sectors, 621 cylinders
Units = cylinders of 4032 * 512 bytes

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-621, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-621, default 621): +256M

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (197-621, default 197):
Using default value 197
Last cylinder or +size or +sizeM or +sizeK (197-621, default 621): +32M

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 3
First cylinder (197-621, default 197):
Using default value 197
Last cylinder or +size or +sizeM or +sizeK (197-621, default 621): <ENTER>

Command (m for help): t
Partition number (1-4): 2
Hex code (type L to list codes): 82
Changed system type of partition 2 to 82 (Linux swap)      
Command (m for help): p

Disk /dev/sd?: 64 heads, 63 sectors, 621 cylinders
Units = cylinders of 4032 * 512 bytes
 
   Device Boot    Start       End    Blocks   Id  System
/dev/sd?1   *         1       196    395104+  83  Linux
/dev/sd?2           197       262    133056   82  Linux swap
/dev/sd?3           263       458    395136   83  Linux

Command (m for help): w

5.4) format the opt and data partitions, and prepare the swap partition:

# mke2fs -j -m 1 -L Optware /dev/sd?1
mke2fs 1.18, 11-Nov-1999 for EXT2 FS 0.5b, 95/08/09
Filesystem label=Optware
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
122112 inodes, 243964 blocks
12198 blocks (5.00%) reserved for the super user
First data block=0
8 block groups
32768 blocks per group, 32768 fragments per group
15264 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376

Writing inode tables: done
Writing superblocks and filesystem accounting information: done

# mke2fs -j -m 1 -L Shared /dev/sd?3
mke2fs 1.18, 11-Nov-1999 for EXT2 FS 0.5b, 95/08/09
Filesystem label=Shared
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
122112 inodes, 243964 blocks
12198 blocks (5.00%) reserved for the super user
First data block=0
8 block groups
32768 blocks per group, 32768 fragments per group
15264 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376

Writing inode tables: done
Writing superblocks and filesystem accounting information: done

# mkswap /dev/sd?2

5.5) Now your disk drive is partitioned and formatted for Linux.


================================================== ==========
II. CONNECTING THE DRIVE TO YOUR ROUTER
================================================== ==========

1. You should have the JFFS file system enabled on your router. On the DD-WRT web GUI screen, the Administration/Management tab contains this option in an area labeled JFFS2 Support. Enable both options and reboot your router. After it reboots, the first option (JFFS2) will remain enabled and the second option (Clean JFFS2) will be disabled.
2. On the DD-WRT web GUI screen, on the Services tab enable the options for:

• Core USB support
• USB 2.0 support
• USB storage support
• ext2/ext3 File System support

2.1 From the DD-WRT web GUI screen, on the Administration/Management tab, scroll to the bottom and click on Reboot Router.
3. After a minute, start a terminal session to your router.
4. Disconnect the disk from your computer and connect it to your router.
5. In the terminal session, use the command dmesg | more to insure your disk drive is recognized. Here's what it should look like:

SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Journalled Block Device driver loaded
hub.c: new USB device 00:03.1-1, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
hub.c: new USB device 00:03.1-1.3, assigned address 3
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: WD        Model: 1600BEV External  Rev: 1.05
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
Partition check:
 /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3

6. Change to the directory /dev/scsi/host0/bus0/target0/lun0 and list the files there. There should be one entry for the hard disk drive, and one for each of the three disk partitions.

# cd /dev/scsi/host0/bus0/target0/lun0
# ls -la
drwxr-xr-x    1 root     root            0 Jan  1 00:00 .
drwxr-xr-x    1 root     root            0 Jan  1 00:00 ..
brw-------    1 root     root       8,   0 Jan  1 00:00 disc
brw-------    1 root     root       8,   1 Jan  1 00:00 part1
brw-------    1 root     root       8,   2 Jan  1 00:00 part2
brw-------    1 root     root       8,   2 Jan  1 00:00 part3

7. Change to the JFFS2 directory, and create directories for mounting the disk partition:

# cd /jffs
# mkdir mnt
# mkdir mnt/disk1

8. Test mount your new opt and data partitions. In the terminal window, issue these commands:

# mount /dev/scsi/host0/bus0/target0/lun0/part1 /opt
# mount /dev/scsi/host0/bus0/target0/lun0/part3 /jffs/mnt/disk1
# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
/dev/mtdblock/4 on /jffs type jffs2 (rw)
/dev/scsi/host0/bus0/target0/lun0/part3 on /jffs/mnt/disk1 type ext3 (rw)
/dev/scsi/host0/bus0/target0/lun0/part1 on /opt type ext3 (rw)

9. On the DD-WRT web GUI screen, on the Administration/Commands tab, click the Edit button, then enter your disk mount commands:

mount /dev/scsi/host0/bus0/target0/lun0/part1 /opt
mount /dev/scsi/host0/bus0/target0/lun0/part3 /jffs/mnt/disk1

Click on Save Startup to store the commands. Your terminal session will be disconnected.
10. From the DD-WRT web GUI screen, on the Administration/Management tab, scroll to the bottom and click on Reboot Router.
11. After a minute, restart your terminal session and issue the mount command again. You should see both of your disk partitions mounted, even after the router has rebooted.

# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
/dev/mtdblock/4 on /jffs type jffs2 (rw)
/dev/scsi/host0/bus0/target0/lun0/part3 on /jffs/mnt/disk1 type ext3 (rw)
/dev/scsi/host0/bus0/target0/lun0/part1 on /opt type ext3 (rw)

================================================== ==========
III. INSTALLING OPTWARE ON YOUR DISK
================================================== ==========

After JFFS is enabled and disk partitions are mounting, you can download and install the Optware packages that provide more Linux functionality to the router. These will be installed onto the hard disk drive, not on the router itself. Remember the /opt directory on your router actually resides on the disk drive.

1. Use the command ipkg update to update your ipkg repositories:

# ipkg update 
Downloading http://ipkg.nslu2-linux.org/feeds/optware/ddwrt/cross/stable/Packages ...
Connecting to ipkg.nslu2-linux.org[140.211.166.82]:80 
Packages             100% |**********************************************|   259 KB 00:00:00 ETA
Done.
Updated list of available packages in //jffs/usr/lib/ipkg/lists/optware

2. Now download the Optware installation script from the web to the /tmp directory:

# wget http://www.3iii.dk/linux/optware/optware-install-ddwrt.sh -O - | tr -d '\r' > /tmp/optware-install.sh

3. Execute the Optware installation script you just downloaded. It will take some time to download and configure everything, so verify it starts running, then take a break and come back in ten or fifteen minutes.

# sh /tmp/optware-install.sh
Checking system config ...
 Using 192.168.1.1 as default gateway.
 Using the following nameserver(s):
 nameserver 192.168.1.30
 Warning: local nameserver is different than gateway!
 Check config or enter:
   sed -i s/192.168.*/192.168.1.1/ /tmp/resolv.conf
 to correct this.
 Installing package uclibc-opt_0.9.28-13_mipsel.ipk ...
 Connecting to ipkg.nslu2-linux.org[140.211.166.82]:80
 uclibc-opt_0.9.28-12 100% |***********************************************|   832 KB 00:00:00 ETA
 Updating /opt/etc/ld.so.cache
 /opt/sbin/ldconfig: can't create /opt/etc/ld.so.cache~ (No such file or directory)
 Installing package ipkg-opt_0.99.163-9_mipsel.ipk ...
 Connecting to ipkg.nslu2-linux.org[140.211.166.82]:80
 ipkg-opt_0.99.163-9_ 100% |***********************************************| 75896    00:00:00 ETA
 Downloading http://ipkg.nslu2-linux.org/feeds/optware/ddwrt/cross/stable/Packages.gz
 Inflating http://ipkg.nslu2-linux.org/feeds/optware/ddwrt/cross/stable/Packages.gz
 Updated list of available packages in /opt/lib/ipkg/lists/optware
 Successfully terminated.
 Installing uclibc-opt (0.9.28-12) to /opt/...
 Downloading http://ipkg.nslu2-linux.org/feeds/optware/ddwrt/cross/stable/uclibc-opt_0.9.28-12_mipsel.ipk
 package uclibc-opt suggests installing ipkg-opt
 Configuring uclibc-opt
 Updating /opt/etc/ld.so.cache
 Successfully terminated.
 Installing ipkg-opt (0.99.163-9) to /opt/...
 Downloading http://ipkg.nslu2-linux.org/feeds/optware/ddwrt/cross/stable/ipkg-opt_0.99.163-9_mipsel.ipk
 Configuring ipkg-opt
 Successfully terminated.

4. Now install the busybox packages including links for busybox commands:

# /opt/bin/ipkg-opt install busybox-base
# /opt/bin/ipkg-opt install busybox
# /opt/bin/ipkg-opt install busybox-links

5. In your terminal session, update your default executable PATH to look for the new Optware software before the DD-WRT software:

# export PATH=/opt/bin:/opt/sbin:${PATH}

================================================== ==========
IV. ACTIVATING SWAP
================================================== ==========

0. Insure the swap partition is formatted correctly by using the Optware busybox mkswap command:

# /opt/bin/busybox mkswap /dev/scsi/host0/bus0/target0/lun0/part2

1. Test your swap partition by using the Optware busybox swapon command:

# /opt/bin/busybox swapon /dev/scsi/host0/bus0/target0/lun0/part2

2. Use the free command to verify your swap space is active:

# free
              total         used         free       shared      buffers
  Mem:        13048        12564          484            0          908
 Swap:        72252            0        72252
Total:        85300        12564        72736

3. Using the DD-WRT web GUI screen, go to the Administration/Commands screen, and click 'Edit'. Add the busybox swapon command below everything else so swap will be enabled whenever the router reboots. Click on Save Startup to save your startup commands. Your terminal session will be disconnected.

/opt/bin/busybox swapon /dev/scsi/host0/bus0/target0/lun0/part2

4. Using the DD-WRT web GUI screen, go to the Administration/Management tab, scroll to the bottom, and click on Reboot Router
5. After a minute, restart your terminal session, and use the free command again. This verifies your swap space is activated whenever the router reboots.

================================================== ==========
V. INSTALLING SAMBA
================================================== ==========

1. Using the terminal session, use the Optware ipkg-opt command to update your repository, remove any Samba packages installed with Optware, then download and install the Samba software:

# /opt/bin/ipkg-opt update 
Downloading http://ipkg.nslu2-linux.org/feeds/optware/ddwrt/cross/stable/Packages.gz
Inflating http://ipkg.nslu2-linux.org/feeds/optware/ddwrt/cross/stable/Packages.gz
Updated list of available packages in /opt/lib/ipkg/lists/optware
Successfully terminated.

# /opt/bin/ipkg-opt remove samba
# /opt/bin/ipkg-opt install samba2

2. Samba uses a default Linux user name of nobody but DD-WRT doesn't provide this user name by default. The workaround is to add this user to the DD-WRT user/password file every time the router reboots.
3. Using the DD-WRT web GUI screen, go to the Administration/Commands screen. Add the following command to the bottom of your startup commands:

echo "nobody:*:65534:65534:nobody:/var:/bin/false" >>/tmp/etc/passwd

4. Using the DD-WRT web GUI screen, go to the Administration/Management tab, scroll to the bottom, and click on Reboot Router'
5. After a minute, restart your terminal session, and check the user/password file to insure the nobody user has been added following a reboot:

# grep nobody /tmp/etc/passwd
nobody:*:65534:65534:nobody:/var:/bin/false

6. Create a shared data directory on your hard disk drive:

# cd /jffs/mnt/disk1
# mkdir share
# chmod 777 share

7. Edit the Samba configuration file to add this share at the bottom of the file:

# cd /opt/etc/samba
# cat >>smb.conf  <<EOF

[disk1]
    comment = DD-WRT shared disk
    path = /jffs/mnt/disk1/share
    public = yes
    writable = yes
    printable = no
    create mask = 0666

EOF

8. Edit the Samba configuration file to:
8.1) change the default workgroup name. Yours should match whatever is on all your other computers.
8.2) Define the range of IP addresses allowed
8.3) Announce itself on your network

# vi smb.conf

[global]

# workgroup = NT-Domain-Name or Workgroup-Name
   workgroup = MyWorkgroupName

# server string is the equivalent of the NT Description field
   server string = DD-WRT Samba Server

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. 
   hosts allow = 192.168.1.  127.

# Cause this host to announce itself to local subnets here
   remote announce = 192.168.1.255

:wq
#

9. Test the Samba configuration by manually starting the two Samba daemons:

# /opt/sbin/nmbd -D
# /opt/sbin/smbd -D

10. From your computer, browse your network. Go to the address bar, enter two back-slashes followed by the IP address of your router and press ENTER. You should see your shared disk drive

\\192.168.1.1

11. If you can see the drive, create a test directory and a test file within that directory from your computer.
12. Using the DD-WRT web GUI screen, go to the Administration/Commands screen. Add the following command to the bottom of your startup commands:

/opt/etc/init.d/S80samba start

13. Using the DD-WRT web GUI screen, go to the Administration/Management tab, scroll to the bottom, and click on Reboot Router
14. After a minute, browse your network again to insure the drive is shared after the router reboots.

================================================== ==========
VI. ALL THE STARTUP COMMANDS
================================================== ==========

When you're finished, your router startup commands should look something like this:

mount /dev/scsi/host0/bus0/target0/lun0/part1 /opt
mount /dev/scsi/host0/bus0/target0/lun0/part3 /jffs/mnt/disk1
/opt/bin/busybox swapon /dev/scsi/host0/bus0/target0/lun0/part2
echo "nobody:*:65534:65534:nobody:/var:/bin/false" >>/tmp/etc/passwd
/opt/etc/init.d/S80samba start

Enjoy....

[yazyazoo]

Vorlon,
I retried to start from scratch. I get to dmesg to check my partions on the Harddrive. I get this. What is wrong. I tried reflashing the router and reformatting the harddrive. For some reason it's remembering something from my old installation try.

root@DD-WRT:~# dmesg
CPU revision is: 00029029
Linux version 2.4.36 (bin@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #1807 Fri Sep 26 11:49:13 CEST 2008
Setting the PFC to its default value
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
CPU: BCM5354 rev 2 at 240 MHz
Using 120.000 MHz high precision timer.
Calibrating delay loop... 239.20 BogoMIPS
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
PCI: Setting latency timer of device 00:01.0 to 64
PCI: Setting latency timer of device 00:05.0 to 64
sb_doattach: incoming bus is PCI but it's a lie, switching to SB devid:0x4318
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x400000 at 0x1c000000
bootloader size: 131072
Physically mapped flash: Filesystem type: squashfs, size=0x2089f5
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00020000 : "cfe"
0x00020000-0x003f0000 : "linux"
0x00101c00-0x00310000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x003f0000-0x00400000 : "nvram"
0x00310000-0x003f0000 : "ddwrt"
sflash not supported on this router
Initializing Cryptographic API
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded - (c) astaro AG
ipt_osf: Startng OS fingerprint matching module.
ipt_IPV4OPTSSTRIP loaded
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
USB20H fcr: 0x64
USB20H shim cr: 0x8f7
USB20H syn01 register : 0xfe00fe
USB20H syn03 register : 0x1
PCI: Setting latency timer of device 00:03.1 to 64
ehci_hcd 00:03.1: PCI device 14e4:471a
ehci_hcd 00:03.1: irq 6, pci mem b8003800
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:03.1: illegal capability!
ehci_hcd 00:03.1: USB 0.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 2 ports detected
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Journalled Block Device driver loaded
hub.c: new USB device 00:03.1-1, assigned address 2
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: WDC WD20 Model: 0EB-00CPF0 Rev: 0811
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 39102336 512-byte hdwr sectors (20020 MB)
Partition check:
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
vlan0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
device eth1 entered promiscuous mode
device vlan1 entered promiscuous mode
vlan1: Setting MAC address to 00 1e 8c ce fb 05.
vlan1: dev_set_promiscuity(master, 1)
vlan1: dev_set_allmulti(master, 1)
vlan1: dev_set_promiscuity(master, -1)
device vlan1 left promiscuous mode
vlan1: dev_set_allmulti(master, -1)
vlan1: add 01:00:5e:00:00:01 mcast address to master interface
SQUASHFS error: Can't find a SQUASHFS superblock on sd(8,1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
root@DD-WRT:~# ls -la
drwx------ 1 root root 0 Jan 1 1970 .
drwxrwxrwx 1 root root 0 Jan 1 2000 ..
-rw-r--r-- 1 root root 61 Nov 10 05:47 .profile
drwx------ 1 root root 0 Jan 1 1970 .ssh

[yazyazoo]

Vorlon,
I tried to do it again and just went ahead to try it. Everything seemed to work up to Activating Swap.

I get an error.

root@DD-WRT:/# export PATH=/opt/bin:/opt/sbin:${PATH}
root@DD-WRT:/# /opt/bin/busybox swapon /dev/scsi/host0/bus0/target0/lun0/part2
-sh: /opt/bin/busybox: not found

I looked at the busybox and there isn't even a swapon command in it. Did the busybox core install?

[dzap]

I'm doing this as we speak..diverting some steps..dzap-noob-proof method coming up..since I just stared at all of Volron's code and almost fainted....so far..my way is working

[tonylu]

Quote from dzap : sigh..I still haven't figured out how to unbrick this..I installed dd-wrt many months ago but it got screwed up somewhere along the way..I remember I unbricked it more than once but I forgot the ip of it..damn..there has to be a way

You can try this method: http://wl500g.info/showpost.php?p...stcount=11

It worked great for my bricked wl-520GU, although the method is for wl500g. You need to download wl-520gu firmware from ASUS.

[dzap]

sh*t..so close...the share is there but Vista keeps asking me for a username and password..and I've tried everything..arghh..