Sears Craftsman 1/2" and 3/8" torque wrenches $36 each (normally $80)

[redsolar]

Sears has Craftsman Microtork Torque Wrenches on sale for $40 each - 10% off in cart = $36. Choose in-store pickup to save on shipping, otherwise it's $7. Thanks Adam2004
If ordering more than one (or more than $50 worth) use coupon SDEALS817 for an additional $5 off.

• 10-75 ft. lbs 3/8 in. Drive $36
• 20-150 ft. lbs 1/2 in. Drive $36
• 25-250 in. lbs 3/8 in. Drive $36

[cougarman]

code 777 saves $7 off $70

[decolores9]

Quote from Adam2004 : These torque wrenches were $80 last week -

These are the click-type torque wrenches, not the beam type, which means:
1. no lifetime warranty
2. Less accuracy
3. They have to be calibrated periodically
4. They are prone to overtorquing

[Adam2004]

Quote from decolores9 : These are the click-type torque wrenches, not the beam type, which means: 1. no lifetime warranty 2. Less accuracy 3. They have to be calibrated periodically 4. They are prone to overtorquing

Accuracy and calibration are inherit to the type of tool this is. Show me an affordable beam torque wrench that goes up to 150 ft lbs. Of course there is always something better, but it will come with a price. As I mentioned in my first post, these aren't mechanic grade to be used 24/7. If this is the case, you aren't buying your tools off of SlickDeals.

[decolores9]

Quote from Adam2004 : Accuracy and calibration are inherit to the type of tool this is.

Not really. These wrenches are probably accurate the first time you use them, but accuracy degrades each time you turn the adjustment. They really need to calibrated annually for "weekend warrior" use, monthly for pro use. The danger is that if they are not calibrated, they tend to overtorque the fastener. In addition, most users will overtorque this type of torque wrench 15% to 25%, because they won't stop with one click.

The craftsman 1/2" drive beam type torque wrench retails for $29.99 full price and does go to 150 ft-lbs. It's a more accurate, reliable tool at a lower cost - and has a lifetime warranty.

[GSteg]

I dont have this particular craftsman torque wrench, but a 'digitork' version which is essentially the same click-type wrench. I've had it in a shop for 2 years now and it's still retain it's accuracy.

As long the user resets the value back to zero every time he/she is done using it, then the torque wrench will remain pretty accurate for a long time. I also see people using these as breaker bars and that will DEFINITELY ruin it.

In any case, this is MUCH better than tightening your lug nuts by hand

[smoky350]

does the 50% additional sale only for this torque wrench? I also need a breaker bar but seems like it doesn't qualify for the 50% off.

[Adam2004]

Quote from smoky350 : does the 50% additional sale only for this torque wrench? I also need a breaker bar but seems like it doesn't qualify for the 50% off.

Seems to only be these three - but I could be wrong.

Quote from GSteg : As long the user resets the value back to zero every time he/she is done using it, then the torque wrench will remain pretty accurate for a long time. I also see people using these as breaker bars and that will DEFINITELY ruin it.

Absolutely, couldn't agree more.

[artec_19]

I have had this torque wrench (1/2 inch drive) for a couple years and have no problems with it.

I have used a beam torque wrench extensively, and let me tell you it is not always in a position that allows you to see the torque scale. Or if you can see the torque scale, you might be looking at it at an angle, resulting in a slightly incorrect reading (there goes your accuracy). The good thing about this torque wrench is you can simply set the torque and ratchet away until you hear a click. A real time saver. Definitely worth it for me!

Good deal! I believe I paid full price on this, and I still think it was worth it.

[thesameguy]

Quote from artec_19 : I have had this torque wrench (1/2 inch drive) for a couple years and have no problems with it. I have used a beam torque wrench extensively, and let me tell you it is not always in a position that allows you to see the torque scale. Or if you can see the torque scale, you might be looking at it at an angle, resulting in a slightly incorrect reading (there goes your accuracy). The good thing about this torque wrench is you can simply set the torque and ratchet away until you hear a click. A real time saver. Definitely worth it for me! Good deal! I believe I paid full price on this, and I still think it was worth it.

I have both the 20-150 and 10-75 torque wrenches of this type, and have been using them for close to four years. Never a problem, and I use them frequently for everything from changing wheels to torquing head bolts. I'm no pro, so they're only seeing perhaps 2-3 uses (on multiple fasteners) monthly, but still frequent, consistent use. This weekend they torqued wheels, a water pump, and a timing belt tensioner.

The beam type parts are just not useful in most automotive applications due to access/view - the clicker types are they only way to go.

It is of course to maintain them properly - store them safely, never go past the first click, and always reset to zero immediately after use. As long as you satisfy those requirements there's no reason you can get years of service (as I have) out of these wrenches.

These are so cheap I'm seriously considering buying some more, but I don't think I can justify spending the money right now! If they had the giant 250 lb ft one on sale I'd definitely pull the trigger.

[wave]

Quote from decolores9 : Not really. These wrenches are probably accurate the first time you use them, but accuracy degrades each time you turn the adjustment. They really need to calibrated annually for "weekend warrior" use, monthly for pro use. The danger is that if they are not calibrated, they tend to overtorque the fastener. In addition, most users will overtorque this type of torque wrench 15% to 25%, because they won't stop with one click. The craftsman 1/2" drive beam type torque wrench retails for $29.99 full price and does go to 150 ft-lbs. It's a more accurate, reliable tool at a lower cost - and has a lifetime warranty.

Accurate??? The needle is 10ftlbs wide. It meets a price point and that's about it. These are just fine for a weekender as long as they're unloaded after use. If you are wrenching all day everyday, drop 250-1500 on a snap on, otherwise you're good to go.

[2k1civicexcoupe]

This is actually a better deal than the BF one. Its the same one but at least $4 cheaper(depending on how many you buy). Plus you get cashback through bing! This is a great deal for a not so everyday torque wrench.

Nic

[italianman7]

Been needing one of the inlb for working on small engines. Good deal. Rep for OP.