Forum Thread

Obi 202 need help setting the second port and newly ported #

1,091 47 June 18, 2020 at 05:10 PM
Hello I have Obi 202 one port is configured and working like a charm.

I ported another # and want the second port on Obi 202 configured to receive and make calls from the newly ported #.

{lease help with step by step instructions.

Thank you

2 Comments

1

Sign up for a Slickdeals account to remove this ad.

This comment has been rated as unhelpful by Slickdeals users
Joined Dec 2015
L3: Novice
101 Posts
26 Reputation
#2
For most providers, it will be just like "Line 1,"

1) Log into: obitalk.com
2) Expand your OBi Dashboard to show your registered devices
3) Assuming "Line 1" was assigned to SP1, click SP2 to start "Line 2" Setup
4) Scroll down to "OBiTALK Compatible Service Providers" click next and follow the setup guide.

When you have more than one line, the biggest thing to remember is which line is the default when you go to dial out and which one requires a prefix to switch to the other line for dialing out. Both lines will ring the device, but use different ring tones so it's easy to differentiate (it can be adjusted).

If you didn't set up "Line 1" with the obitalk.com, but instead went to the device's IP address OR you are trying to set up a provider that is compatible with the device but not included as part of the setup from above, you will need to find the device's IP address, login, and program it manually.
0
0
0
0
Reply
This comment has been rated as unhelpful by Slickdeals users
Joined May 2007
L6: Expert
1,091 Posts
47 Reputation
Original Poster
#3
Quote from Valkana
:
For most providers, it will be just like "Line 1,"

1) Log into: obitalk.com
2) Expand your OBi Dashboard to show your registered devices
3) Assuming "Line 1" was assigned to SP1, click SP2 to start "Line 2" Setup
4) Scroll down to "OBiTALK Compatible Service Providers" click next and follow the setup guide.

When you have more than one line, the biggest thing to remember is which line is the default when you go to dial out and which one requires a prefix to switch to the other line for dialing out. Both lines will ring the device, but use different ring tones so it's easy to differentiate (it can be adjusted).

If you didn't set up "Line 1" with the obitalk.com, but instead went to the device's IP address OR you are trying to set up a provider that is compatible with the device but not included as part of the setup from above, you will need to find the device's IP address, login, and program it manually.
Thank you is there a way that line 1 SP1 rings only for Sp1 and SP2 rings for SP2?
0
0
0
0
Reply
Page 1 of 1
1
Join the Conversation
Add a Comment
 
Link Copied to Clipboard