Did this coupon
work for you?
work for you?
Sold By | Sale Price |
---|---|
Amazon | $529 |
Product Name: | DuroMax XP4400EH Dual Fuel Portable Generator-4400 Watt Gas or Propane Powered Electric Start-Camping & RV Ready, 50 State Approved, Blue and Black |
Manufacturer: | DuroMax |
Model Number: | XP4400EH |
Product SKU: | B009RBKGZC |
The link has been copied to the clipboard.
33 Comments
Your comment cannot be blank.
Featured Comments
Sign up for a Slickdeals account to remove this ad.
Why does this have a 240 volt outlet? According to its specifications the running amps @ 240 volts on propane is only 13.9 amps. To start either a well pump or an electric water heater the generator needs to be 22 amp 240 volt rated with 27 amps momentary surge starting.
I had a 220v 24K BTU window air conditioner plus fridges, lights, freezers, internet , tvs and lights running just fine on this generator....
Why does this have a 240 volt outlet? According to its specifications the running amps @ 240 volts on propane is only 13.9 amps. To start either a well pump or an electric water heater the generator needs to be 22 amp 240 volt rated with 27 amps momentary surge starting.
Our community has rated this post as helpful. If you agree, why not thank BudmanTom
I've run this generator primarily on non-ethanal gas and I haven't had any issues but I do run the carb dry after each use.
Depending on your needs keep an eye out for the DuroMax XP4000S or DuroStar DS4000S for a basic but awesome generator that goes on sale for around $220 or the DuroMax XP5500E that's currently sub $350 with 5500/4500 watts (not dual fuel).
https://www.amazon.com/gp/product...X0DER
Would something like this be okay for a PA system / mobile DJ setup?
My understanding is that you want to take the system's wattage and 2x it to be safe. The speakers I've got now are Mackie Thump 15a's - they're rated 1300W but operate well below that.
However, I'm mainly concerned about the sensitivity of the components (laptop, controller, mixer, and speakers).
I've seen chatter about "power cleaner" protectors. Or like, how an inverter would be better for sensitive electronics.
Would greatly appreciate some insights (and suggestions!)
Would something like this be okay for a PA system / mobile DJ setup?
My understanding is that you want to take the system's wattage and 2x it to be safe. The speakers I've got now are Mackie Thump 15a's - they're rated 1300W but operate well below that.
However, I'm mainly concerned about the sensitivity of the components (laptop, controller, mixer, and speakers).
I've seen chatter about "power cleaner" protectors. Or like, how an inverter would be better for sensitive electronics.
Would greatly appreciate some insights (and suggestions!)
Sign up for a Slickdeals account to remove this ad.
Would something like this be okay for a PA system / mobile DJ setup?
My understanding is that you want to take the system's wattage and 2x it to be safe. The speakers I've got now are Mackie Thump 15a's - they're rated 1300W but operate well below that.
However, I'm mainly concerned about the sensitivity of the components (laptop, controller, mixer, and speakers).
I've seen chatter about "power cleaner" protectors. Or like, how an inverter would be better for sensitive electronics.
Would greatly appreciate some insights (and suggestions!)
For your situation, you want a closed frame inverter generator...
If you have a lot of woofers hitting, you will not want to run the inverter in eco mode BTW for the sudden changes in current from the amps (unless you had a line conditioner with a capacitor on it )