A PCIe Gen4 x4 controller delivers up to 5,000MB/sec sequential read and 4,400MB/sec sequential write speeds, for outstanding read, write, and response times.
High-Speed Gen4 PCIe x4 NVMe 1.4 M.2 Interface: Using PCIe Gen4 technology for maximum bandwidth, the MP600 CORE XT delivers great storage performance.
High-Density 3D QLC NAND: Provides the ideal combination of performance and value.
This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
A PCIe Gen4 x4 controller delivers up to 5,000MB/sec sequential read and 4,400MB/sec sequential write speeds, for outstanding read, write, and response times.
High-Speed Gen4 PCIe x4 NVMe 1.4 M.2 Interface: Using PCIe Gen4 technology for maximum bandwidth, the MP600 CORE XT delivers great storage performance.
High-Density 3D QLC NAND: Provides the ideal combination of performance and value.
I wouldn't even consider the 2tb for $80, since there are drives as good or better for cheaper and drives only slightly more expensive with much better performance. On the other hand, since 4tb tends to command a hefty premium, the 4tb for $160 isn't too bad of a deal, though it isn't incredible either. This is a dram-less 176-Layer Micron QLC pcie gen 4 drive using the Phison E21T controller. This means performance is mediocre at best, and I would not recommend using it as a boot drive. The qlc nand flash also has significantly less endurance in terms of TBW compared to tlc (or even compared to the higher quality qlc flash used by intel/solidigm), so I would not use this drive if your use case is write heavy or demands a high degree of reliability. That being said, for cheap mass storage on a gen 4 ssd, this is not a terrible price. You can definitely get a better deal if you wait though.
Edit: Since there have been multiple people asking about what to use as a boot drive, I've gone into a fair amount of detail in this post further in this thread: https://slickdeals.net/f/16930396-2tb-corsair-mp600-core-xt-pcie-4-0-gen4-x4-nvme-m-2-solid-state-drive-80-more-free-s-h?p=165900142#post165900142
Unfortunately, higher end 4tb ssds tend to command a significant price premium compared to the 2tb versions commonly available. For a boot drive I recommend purchasing a drive with dram, tlc nand flash memory, and preferably a modern gen 4 controller with good 4k random read and write performance. I'll provide a brief explanation of these three qualities and why they're valuable for a boot drive; if you're not interested in that my actual product recommendations will be at the bottom of this post.
Dram (dynamic-random access memory) is essentially an additional flash memory chip in the ssd that functions similarly to the ram in your computer. Dram is able to store the data map tables instead of using the nand flash of the ssd, which allows for improved performance across the board, particularly random read and write performance for small files. This is far more meaningful to operating system performance compared to the heavily advertised peak sequential speeds of a ssd which are meaningless past a certain threshold in the vast majority of standard use. Additionally, by not requiring the data map tables to be stored and accessed from the nand flash, dram significantly reduces the wear on the ssd from standard use therefore increasing longevity and reliability. While hmb (host memory buffer) and to some extent slc/pslc caching can mitigate the downsides of using a dramless drive, unless the price difference is absolutely absurd I always recommend using a drive with dram for your boot drive which your operating system runs on.
Moving on to the type of nand flash used, tlc in general is simply a superior type of memory compared to qlc for most applications, with the primary downside being increased cost. Qlc memory tends to be slower (though higher density qlc used in higher capacity drives can close the gap somewhat) and has significantly worse endurance, especially in terms of writes. You will typically find qlc used in budget or value tier drives, and qlc drives with dram are significantly less common. Qlc drives due to their low cost tend to excel as cheap mass storage for those that don't wish to use hard drives.
The ssd controller is basically an embedded microcontroller functioning as the brains of the ssd, managing all the different functions. A high quality controller will allow for lower latency, faster performance, and better reliability. 4k random read and write performance (essentially the ability to quickly access, read, and write small files), which is the most important metric for operating system performance, is heavily affected by the controller. Most smaller ssd manufacturers will license a controller from a company such as phison, but some larger manufacturers (such as samsung, western digital, etc.) use their own in house controllers. When considering a drive for use as a boot drive it is best to pay attention to the random 4k random read and write performance (typically displayed in iops). Peak sequential read/write speed can be disregarded as long as it's over 5000 and your use case does not require constant copying of enormous (dozens of gigabytes) files.
Getting back to actual product recommendations, there unfortunately aren't any good value 4tb drives that are well suited for being boot drives (unless you count that one price mistake for the 4tb wd sn850x). The best options I know of are: the 4tb wd sn850x which occasionally goes on sale for $230, the 4tb teamgroup T-Force cardea a440 pro which is currently on sale for $220 on amazon, and the 4tb acer predator gm7000 which occasionally goes on sale for $200 (this uses the IG5236 controller which has been known to have issues, though firmware updates have supposedly fixed it).
If you're willing to use a 2tb drive as your boot drive rather than a 4tb drive there are tons of good options that provide a far better value. Some standouts include: the 2tb wd sn850x which has dropped as low as $90 and is regularly on sale for $100 with good additional cashback, the 2tb solidigm p44 pro (and the hynix platinum p41 which is the extremely similar previous version of this drive) which occasionally go on sale for $100, and the 2tb samsung 980 pro which is slightly slower but goes on sale for $90 or $100 with a built in heatsink and can rarely be found at a more substantial discount since it's been replaced by the 990 pro.
Ssd prices have been dropping for quite a while, and even though prices seem to have plateaued for now I'd expect there to be some good sales around black-friday/cyber-monday.
61 Comments
Sign up for a Slickdeals account to remove this ad.
Super misleading to post the price at $80 but show the 4TB variant in the title..
I farking hate how Slickdeals does this now. Everytime I am like holy shit that's a great deal and then I click on it and I'm like, oh that's normal pricing.
Before anyone asks, yes this drive IS compatible for a PS5
This is misinformation. The min read speed requirement for PS5 is 5,500 MB/s, this drive is 5,000 MB/s (will actually read closer to 4,500). It'll technically work but is not optimized for the system or games.
I have a Samsung 980 Pro which is an almost identical drive to the stock PS5 SSD, read speed is 6,500 MB/s.
Our community has rated this post as helpful. If you agree, why not thank BeigeRoad455
Quote
from GamerMwM
:
I'm looking for a good 4TB NVME SSD. Can you recommend a few alternatives that are decently priced and have the features you'd recommend for a boot drive.
Quote
from seane3
:
What would you consider instead of this one for 4tb as a boot drive and whatnot? I'm actually in the market for this, but I can wait till Black Friday. I also wanna stay near $200ish as my limit.
Unfortunately, higher end 4tb ssds tend to command a significant price premium compared to the 2tb versions commonly available. For a boot drive I recommend purchasing a drive with dram, tlc nand flash memory, and preferably a modern gen 4 controller with good 4k random read and write performance. I'll provide a brief explanation of these three qualities and why they're valuable for a boot drive; if you're not interested in that my actual product recommendations will be at the bottom of this post.
Dram (dynamic-random access memory) is essentially an additional flash memory chip in the ssd that functions similarly to the ram in your computer. Dram is able to store the data map tables instead of using the nand flash of the ssd, which allows for improved performance across the board, particularly random read and write performance for small files. This is far more meaningful to operating system performance compared to the heavily advertised peak sequential speeds of a ssd which are meaningless past a certain threshold in the vast majority of standard use. Additionally, by not requiring the data map tables to be stored and accessed from the nand flash, dram significantly reduces the wear on the ssd from standard use therefore increasing longevity and reliability. While hmb (host memory buffer) and to some extent slc/pslc caching can mitigate the downsides of using a dramless drive, unless the price difference is absolutely absurd I always recommend using a drive with dram for your boot drive which your operating system runs on.
Moving on to the type of nand flash used, tlc in general is simply a superior type of memory compared to qlc for most applications, with the primary downside being increased cost. Qlc memory tends to be slower (though higher density qlc used in higher capacity drives can close the gap somewhat) and has significantly worse endurance, especially in terms of writes. You will typically find qlc used in budget or value tier drives, and qlc drives with dram are significantly less common. Qlc drives due to their low cost tend to excel as cheap mass storage for those that don't wish to use hard drives.
The ssd controller is basically an embedded microcontroller functioning as the brains of the ssd, managing all the different functions. A high quality controller will allow for lower latency, faster performance, and better reliability. 4k random read and write performance (essentially the ability to quickly access, read, and write small files), which is the most important metric for operating system performance, is heavily affected by the controller. Most smaller ssd manufacturers will license a controller from a company such as phison, but some larger manufacturers (such as samsung, western digital, etc.) use their own in house controllers. When considering a drive for use as a boot drive it is best to pay attention to the random 4k random read and write performance (typically displayed in iops). Peak sequential read/write speed can be disregarded as long as it's over 5000 and your use case does not require constant copying of enormous (dozens of gigabytes) files.
Getting back to actual product recommendations, there unfortunately aren't any good value 4tb drives that are well suited for being boot drives (unless you count that one price mistake for the 4tb wd sn850x). The best options I know of are: the 4tb wd sn850x which occasionally goes on sale for $230, the 4tb teamgroup T-Force cardea a440 pro which is currently on sale for $220 on amazon, and the 4tb acer predator gm7000 which occasionally goes on sale for $200 (this uses the IG5236 controller which has been known to have issues, though firmware updates have supposedly fixed it).
If you're willing to use a 2tb drive as your boot drive rather than a 4tb drive there are tons of good options that provide a far better value. Some standouts include: the 2tb wd sn850x which has dropped as low as $90 and is regularly on sale for $100 with good additional cashback, the 2tb solidigm p44 pro (and the hynix platinum p41 which is the extremely similar previous version of this drive) which occasionally go on sale for $100, and the 2tb samsung 980 pro which is slightly slower but goes on sale for $90 or $100 with a built in heatsink and can rarely be found at a more substantial discount since it's been replaced by the 990 pro.
Ssd prices have been dropping for quite a while, and even though prices seem to have plateaued for now I'd expect there to be some good sales around black-friday/cyber-monday.
I'm looking for a good 4TB NVME SSD. Can you recommend a few alternatives that are decently priced and have the features you'd recommend for a boot drive.
It's an older Gen3 drive, but for OS/gaming the differences between Gen3 vs Gen4 speeds are generally imperceptible to the end user. The exception would be if you're frequently working with large files (such as video editing/rendering)...for those use cases, you may want to spend a bit more for a Gen4 drive.
Top Comments
Edit: Since there have been multiple people asking about what to use as a boot drive, I've gone into a fair amount of detail in this post further in this thread:
https://slickdeals.net/f/16930396-2tb-corsair-mp600-core-xt-pcie-4-0-gen4-x4-nvme-m-2-solid-state-drive-80-more-free-s-h?p=165900142#p
Dram (dynamic-random access memory) is essentially an additional flash memory chip in the ssd that functions similarly to the ram in your computer. Dram is able to store the data map tables instead of using the nand flash of the ssd, which allows for improved performance across the board, particularly random read and write performance for small files. This is far more meaningful to operating system performance compared to the heavily advertised peak sequential speeds of a ssd which are meaningless past a certain threshold in the vast majority of standard use. Additionally, by not requiring the data map tables to be stored and accessed from the nand flash, dram significantly reduces the wear on the ssd from standard use therefore increasing longevity and reliability. While hmb (host memory buffer) and to some extent slc/pslc caching can mitigate the downsides of using a dramless drive, unless the price difference is absolutely absurd I always recommend using a drive with dram for your boot drive which your operating system runs on.
Moving on to the type of nand flash used, tlc in general is simply a superior type of memory compared to qlc for most applications, with the primary downside being increased cost. Qlc memory tends to be slower (though higher density qlc used in higher capacity drives can close the gap somewhat) and has significantly worse endurance, especially in terms of writes. You will typically find qlc used in budget or value tier drives, and qlc drives with dram are significantly less common. Qlc drives due to their low cost tend to excel as cheap mass storage for those that don't wish to use hard drives.
The ssd controller is basically an embedded microcontroller functioning as the brains of the ssd, managing all the different functions. A high quality controller will allow for lower latency, faster performance, and better reliability. 4k random read and write performance (essentially the ability to quickly access, read, and write small files), which is the most important metric for operating system performance, is heavily affected by the controller. Most smaller ssd manufacturers will license a controller from a company such as phison, but some larger manufacturers (such as samsung, western digital, etc.) use their own in house controllers. When considering a drive for use as a boot drive it is best to pay attention to the random 4k random read and write performance (typically displayed in iops). Peak sequential read/write speed can be disregarded as long as it's over 5000 and your use case does not require constant copying of enormous (dozens of gigabytes) files.
Getting back to actual product recommendations, there unfortunately aren't any good value 4tb drives that are well suited for being boot drives (unless you count that one price mistake for the 4tb wd sn850x). The best options I know of are: the 4tb wd sn850x which occasionally goes on sale for $230, the 4tb teamgroup T-Force cardea a440 pro which is currently on sale for $220 on amazon, and the 4tb acer predator gm7000 which occasionally goes on sale for $200 (this uses the IG5236 controller which has been known to have issues, though firmware updates have supposedly fixed it).
If you're willing to use a 2tb drive as your boot drive rather than a 4tb drive there are tons of good options that provide a far better value. Some standouts include: the 2tb wd sn850x which has dropped as low as $90 and is regularly on sale for $100 with good additional cashback, the 2tb solidigm p44 pro (and the hynix platinum p41 which is the extremely similar previous version of this drive) which occasionally go on sale for $100, and the 2tb samsung 980 pro which is slightly slower but goes on sale for $90 or $100 with a built in heatsink and can rarely be found at a more substantial discount since it's been replaced by the 990 pro.
Ssd prices have been dropping for quite a while, and even though prices seem to have plateaued for now I'd expect there to be some good sales around black-friday/cyber-monday.
61 Comments
Sign up for a Slickdeals account to remove this ad.
I have a Samsung 980 Pro which is an almost identical drive to the stock PS5 SSD, read speed is 6,500 MB/s.
https://www.pcmag.com/news/sony-d...-expansion
Our community has rated this post as helpful. If you agree, why not thank BeigeRoad455
Dram (dynamic-random access memory) is essentially an additional flash memory chip in the ssd that functions similarly to the ram in your computer. Dram is able to store the data map tables instead of using the nand flash of the ssd, which allows for improved performance across the board, particularly random read and write performance for small files. This is far more meaningful to operating system performance compared to the heavily advertised peak sequential speeds of a ssd which are meaningless past a certain threshold in the vast majority of standard use. Additionally, by not requiring the data map tables to be stored and accessed from the nand flash, dram significantly reduces the wear on the ssd from standard use therefore increasing longevity and reliability. While hmb (host memory buffer) and to some extent slc/pslc caching can mitigate the downsides of using a dramless drive, unless the price difference is absolutely absurd I always recommend using a drive with dram for your boot drive which your operating system runs on.
Moving on to the type of nand flash used, tlc in general is simply a superior type of memory compared to qlc for most applications, with the primary downside being increased cost. Qlc memory tends to be slower (though higher density qlc used in higher capacity drives can close the gap somewhat) and has significantly worse endurance, especially in terms of writes. You will typically find qlc used in budget or value tier drives, and qlc drives with dram are significantly less common. Qlc drives due to their low cost tend to excel as cheap mass storage for those that don't wish to use hard drives.
The ssd controller is basically an embedded microcontroller functioning as the brains of the ssd, managing all the different functions. A high quality controller will allow for lower latency, faster performance, and better reliability. 4k random read and write performance (essentially the ability to quickly access, read, and write small files), which is the most important metric for operating system performance, is heavily affected by the controller. Most smaller ssd manufacturers will license a controller from a company such as phison, but some larger manufacturers (such as samsung, western digital, etc.) use their own in house controllers. When considering a drive for use as a boot drive it is best to pay attention to the random 4k random read and write performance (typically displayed in iops). Peak sequential read/write speed can be disregarded as long as it's over 5000 and your use case does not require constant copying of enormous (dozens of gigabytes) files.
Getting back to actual product recommendations, there unfortunately aren't any good value 4tb drives that are well suited for being boot drives (unless you count that one price mistake for the 4tb wd sn850x). The best options I know of are: the 4tb wd sn850x which occasionally goes on sale for $230, the 4tb teamgroup T-Force cardea a440 pro which is currently on sale for $220 on amazon, and the 4tb acer predator gm7000 which occasionally goes on sale for $200 (this uses the IG5236 controller which has been known to have issues, though firmware updates have supposedly fixed it).
If you're willing to use a 2tb drive as your boot drive rather than a 4tb drive there are tons of good options that provide a far better value. Some standouts include: the 2tb wd sn850x which has dropped as low as $90 and is regularly on sale for $100 with good additional cashback, the 2tb solidigm p44 pro (and the hynix platinum p41 which is the extremely similar previous version of this drive) which occasionally go on sale for $100, and the 2tb samsung 980 pro which is slightly slower but goes on sale for $90 or $100 with a built in heatsink and can rarely be found at a more substantial discount since it's been replaced by the 990 pro.
Ssd prices have been dropping for quite a while, and even though prices seem to have plateaued for now I'd expect there to be some good sales around black-friday/cyber-monday.
https://www.amazon.com/dp/B08Z7LN8NM/
It's an older Gen3 drive, but for OS/gaming the differences between Gen3 vs Gen4 speeds are generally imperceptible to the end user. The exception would be if you're frequently working with large files (such as video editing/rendering)...for those use cases, you may want to spend a bit more for a Gen4 drive.