This thread is dedicated to them and their tools. Please update the WIKI.
January 18, 2011, 3:13 am: System Notice: This thread has been automatically renewed after reaching a post limit. Most of its content has been moved to this thread for reference purposes.
Coupon BARCODE issue:
replace
cust=%%=V(@IDENTIFIER)=%%&keycode=%%=V(@KEYCODE)=%%
with
cust=99999999999&keycode=1002
In the address bar
Most of the coupons are at the bottom of the WIKI (next post). However, you may not be able to see them on your mobile device without using the full slickdeals website.
http://www.hfqpdb.com/harborfreightcoupons
12,522 Comments
Sign up for a Slickdeals account to remove this ad.
https://www.kregtool.co
-John
The current ones in the Wiki are expired.
http://www.hfqpdb.com/coupons/16_...3.7309.jp
The current ones in the Wiki are expired.
http://www.hfcoupons.c
The large section of the light draws about 250mA, or one quarter of an ampere for the mathematically-challenged. The 3 light piece draws about 50-60mA.
So, a 2A power supply will run eight of these large lights. If it runs a little too bright (much higher than 5V) you may have to change the resistor to bring it down a bit. But they seem to run pretty long with no trouble. YMMV.
.
John
Oh, and I see I forgot you were talking 12V battery-powered. You can also buy a small module on ebay for about a buck that knocks the 12V down to 5V, with efficiency. If you did that with just a dropping resistor, you're wasting power as heat.
John
I took a 12 v HF universal battery - ( the ones for a drill w/ the sub C in them. Hooked up 3 blues lights in Series and it's been going for the past 2 hours on the 124 LED setting. I even hooked up 4 blue lights at high and it still seemed really strong. But for some reason when I tried checking the Amps on the draw ( hooking up one probe on the + batter and the other on the last neg on the blue light and at 10 amp setting it was showing .11 I did it using AAA batteries in a stand alone blue light on high and it was .53
hooked up 4 in parallel hooked to a phone charger 5volts 1amp.
Mounted one of the free magnetic bars on the wall to hold the lights. Tested in a 15' x 15' room mounted on opposite wall.
For the shed you can hook up a pull switch to turn on/off.
Nice use of the free bar too., thanks
Sign up for a Slickdeals account to remove this ad.
http://www.harborfreig
oh wait nevermind, my link is the same coupons you get in the monthly flyer
http://www.harborfreig
http://www.harborfreig
http://www.harborfreig
http://www.harborfreig
Or are harbor freight compressors not that great of quality?
http://www.harborfreig
http://www.harborfreig
http://www.harborfreig
http://www.harborfreig
Or are harbor freight compressors not that great of quality?
http://www.harborfreig
The oilless compressors are very loud and not as reliable.
I've used intermittently but sometimes with pretty heavy use (it's not rated for continuous operation). I've painted stuff, construction, cleaning with air, used it to power air hammers and scrapers for long periods of time. I'm happy with it.
I saw in the fine print that you can't use % off coupons on compressors. How did you get a coupon to work with it SOOOB?
Sign up for a Slickdeals account to remove this ad.
I saw in the fine print that you can't use % off coupons on compressors. How did you get a coupon to work with it SOOOB?