Creality 3D Official has select
Creality 3D Printers/Resin/Filament on sale listed below.
Shipping is free.
Thanks to community member
CalMal for finding this deal
Note, stock/quantity is limited.
Example Deal(s)
Warranty- Includes a standard 1-year warranty w/ purchase
- Price Research: Purchase this 'Creality Ender 3 V2 3D Printer' today and save $52.40 Off (20% Savings) from the original list price of $262
- This offer/deal is part of Creality Black Friday deals; most are best/lowest price of the year
- Item is expected to arrive within 2-5 working days
- Offer valid only for November 11, 2021 or while promotion last.
Additional Note- Please refer to the forum thread for additional details - Discombobulated
Top Comments
Definitely upgrade to a direct drive system for TPU and PETG. TPU is flexible, which makes it hard to print without direct drive. PETG is stringy, but using a direct drive system helps substantial. PETG is hard and tough.
Get an enclosure in order to work with ABS and ASA. ABS is basically "normal plastic" that you see in everyday items. ASA is basically ABS but with better resistance to the elements, so it's good if you need to put a printed item outdoors. These materials need to slowly cool, otherwise they will warp; put the printer in an enclosure to contain the heat and any toxic gases from printing ABS.
Forget Nylon unless you make so many upgrades that the printer is about 50% upgrades and 200% as expensive after the upgrades. You probably don't need to ever print Nylon or other industrial strength materials though. ABS/ASA and PETG are usually tough enough.
66 Comments
Sign up for a Slickdeals account to remove this ad.
TIA
Microcenter has worked well for me but is $16-$25 per roll.
GST3D has also worked well and is $9/roll if you buy 10 rolls. Expect a BF deal.
Good luck!
Our community has rated this post as helpful. If you agree, why not thank BluntBlaster420
Definitely upgrade to a direct drive system for TPU and PETG. TPU is flexible, which makes it hard to print without direct drive. PETG is stringy, but using a direct drive system helps substantial. PETG is hard and tough.
Get an enclosure in order to work with ABS and ASA. ABS is basically "normal plastic" that you see in everyday items. ASA is basically ABS but with better resistance to the elements, so it's good if you need to put a printed item outdoors. These materials need to slowly cool, otherwise they will warp; put the printer in an enclosure to contain the heat and any toxic gases from printing ABS.
Forget Nylon unless you make so many upgrades that the printer is about 50% upgrades and 200% as expensive after the upgrades. You probably don't need to ever print Nylon or other industrial strength materials though. ABS/ASA and PETG are usually tough enough.
Sign up for a Slickdeals account to remove this ad.
TIA
You can even print parts for your printer!
You can even print parts for your printer!
Get the Aquila if you are considering the E3V2, it was $150 direct from flash forge today.
Microcenter has worked well for me but is $16-$25 per roll.
GST3D has also worked well and is $9/roll if you buy 10 rolls. Expect a BF deal.
Good luck!
Sign up for a Slickdeals account to remove this ad.