Newegg has
32GB (2x 16GB) Mushkin Enhanced Redline Stiletto DDR4 3600 Desktop Memory (MRF4U360GKKP16GX2) on sale for $62.99 - $3 with coupon code
BTSCUA893 =
$59.99.
Shipping is free.
Thanks to Deal Hunter
tDames for finding this deal.
Note: Must apply the listed promo code to receive discount in cart.
Key Specs:- DDR4 3600 (PC4 28800)
- Timing 16-19-19-39
- CAS Latency 16
- Voltage 1.40V
41 Comments
Your comment cannot be blank.
Featured Comments
The only issue I did run into was that I was not aware that with some motherboards when switching out ram to a new kit, you might want to boot into the bios with one stick of the new ram first. Then adjust the settings to the new ram and reboot. Then you can add your second stick of ram.
I kept getting an endless boot cycle with no picture, when I first used both sticks of the new ram. So if you do run into any issues like this, turn your PC off and try the suggestion I mentioned above.
Sign up for a Slickdeals account to remove this ad.
The only possible concern may be that it runs at 1.40 volts, whereas some of the "premium" CL16 3600 RAM is usually 1.35 volts. To me, that doesn't make any difference because I'm not trying to squeeze any overclocking beyond XMP profile out of it.
The only possible concern may be that it runs at 1.40 volts, whereas some of the "premium" CL16 3600 RAM is usually 1.35 volts. To me, that doesn't make any difference because I'm not trying to squeeze any overclocking beyond XMP profile out of it.
Our community has rated this post as helpful. If you agree, why not thank Defiant_1775
The only possible concern may be that it runs at 1.40 volts, whereas some of the "premium" CL16 3600 RAM is usually 1.35 volts. To me, that doesn't make any difference because I'm not trying to squeeze any overclocking beyond XMP profile out of it.
The only issue I did run into was that I was not aware that with some motherboards when switching out ram to a new kit, you might want to boot into the bios with one stick of the new ram first. Then adjust the settings to the new ram and reboot. Then you can add your second stick of ram.
I kept getting an endless boot cycle with no picture, when I first used both sticks of the new ram. So if you do run into any issues like this, turn your PC off and try the suggestion I mentioned above.
Sign up for a Slickdeals account to remove this ad.
Pretty crazy though, seems like 64gb of this in the same brand i have (TForce Vulcan Z) is cl 18-22-22-42 so I feel like this is a really good deal. Doubt I could get anything for my ram in resale tho
Pretty crazy though, seems like 64gb of this in the same brand i have (TForce Vulcan Z) is cl 18-22-22-42 so I feel like this is a really good deal. Doubt I could get anything for my ram in resale tho