B King via Amazon has
LISEN 90W 2-Port USB-C Fast Charging Car Charger Adapter on sale for $13.99 - $1.12 when you clip the 8% off coupon on the product page - $6.16 when you apply promo code
44GKHJRW at checkout =
$6.71.
Shipping is free w/ Prime or on orders of $35 or more.
Thanks to Community Member
j123456ddd for finding this deal.
Note: Must be logged in to clip coupons; coupons are typically one-time use.
Features:
- Equipped with dual PD3.0 fast-charge ports so that the maximum output is up to 90W in total.
- Intelligent power management chip
- Passed UL, CE, FCC, and RoHS certifications.
- Made with PC fuel barrier V-0 grade material
Top Comments
64 Comments
Sign up for a Slickdeals account to remove this ad.
I did purchase this other brand where it had USB-C and USB-A for the ports and it couldn't do this and not only that, it didn't work properly with my dash cam.
When I have my dash cam plugged in and turned on (USB-A port), the device would restart every time I plug in my phone to charge. Ended up returning it.
Other than my phones and battery i don't have anything c-to-c but i need to upgrade my old but very functional no name brand 3 usb-A ports adapter. I see many bad reviews for more expensive 120-165W 3-port adapters, so i decided to go with this one. There are many cheaper (crappier overrated?) similar on Ali. I want to try it with my dashcam with A to C adapter. For dash cams i want to use 2 single channel connected to OBD port via Y-splitter and voltage cutoff switch so i can keep this 2-port just for my phones and small gadgets.
I have this tester in my cart. I think i'll need to connect one to each port to see if this charger can output 90w or 45w per port but i only have one device that can draw more than 45w. Everything else 20w or less. https://www.aliexpress.
Some higher end car adapters will boost the voltage from a 12 volt vehicle and supply 15v and 20v PD, but this is not one of those.
https://www.amazon.com/gp/product...=UTF8&th=1 [amazon.com]
the same
I bought this brand for the first time since I need 2 holes usb c.
I didn't disassemble it.
But in terms of texture and weight, it's a bit different from the AINOPE.
Can anyone test the quality of power supply for a long time?