Woot has
Cooler Master Elite 301 Micro-ATX High Airflow Computer PC Case for
$39.99.
Shipping is free for Amazon Prime Members (must login with your Amazon account and select a shipping address for Woot to apply free shipping) or is otherwise $6 per order.
Thanks to Community Member
BabyBubba for finding this deal.
Features:- Large Intakes Grill: Unrestricted intake grill ensure unrestricted airflow.
- Stay Cool Under Pressure: Experience 280mm liquid cooler and six fan support for optimal thermal efficiency.
- Components Clearance: Supports up to 365mm GPU, CPU coolers height of 163.5mm, and PSU 160mm in length.
- Unrestricted Air Flow: The 3x 120mm ARGB PWM fans deliver exceptional airflow.
- USB Type-C: Integrated in the I/O panel is a USB Type-C port.
15 Comments
Sign up for a Slickdeals account to remove this ad.
A 2+ slot GPU combined with a motherboard where the main PCIe slot is the second slot down will not leave much room for GPU airflow but with the right parts this will make a nice build.
You should be fine, most 4060s are 2 slots and the case has cutouts below the GPU for air to flow from underneath
I've done multiple builds in this case and the quality is much better than other cases at this price
This is a good deal if it meets your needs. Unfortunately doesn't for me as only 1 3.5" and 1 2.5" drive bay and I'm building an NAS and currently contemplating jerry rigging it into my eGPU enclosure. Though perhaps I could jerry rig this instead to hold more drives as there should be plenty of room if I'm not installing a motherboard. 🤔
Here is a YouTube build
https://youtu.be/QHseCctZgq0
Reddit post about it
https://www.reddit.com/r/buildapc...SxGk
Looks like plenty of room. It can pull air from the PSU basement as well. Temps will be fine.
Sign up for a Slickdeals account to remove this ad.
This is a good deal if it meets your needs. Unfortunately doesn't for me as only 1 3.5" and 1 2.5" drive bay and I'm building an NAS and currently contemplating jerry rigging it into my eGPU enclosure. Though perhaps I could jerry rig this instead to hold more drives as there should be plenty of room if I'm not installing a motherboard. 🤔
I am running a my pi5 NAS raid5 5xIronwolf with penta sata hat into this, got it from the previous deal same price, added a hdd caddy into it
Is the caddy just sitting there loose or did you find a way to easily attach it?
Mind sharing the caddy you got? I need one for HDDs in a new build. Thx!
Check evib item 135389662474
I fixed it on the bottom there is small vent above psu section , also added the 120mm argb 1 additional fan to the caddy & because I am using hdd's I had to use the sata extension cables which I moved from the MOBO opening , as I have no mobo just my SBC & hat & if building with any SBC with Nas or infact any HDD 's get a PSU on offer don't rely on the 12v 5-6 A DC adapter style once they are all unreliable & fluctuate a-lot contributing to hdd power cycles or under powering your NAS . I faced it initially then switched to a MSI 650W psu & not a single power cycle increase after that its been over a month now & its rock solid & I am able to plug in any fan or rgb cool stuff