Adorama has
Flashpoint XPLOR Power 1200 Pro R2 TTL Flash w/ Battery (Godox AD1200 Pro, XPLOR-POWER1200-PRO-KHB) for
$899.
Shipping is free.
Thanks to Deal Editor
iconian for finding this deal.
Includes:
- Flashpoint XPLOR Power 1200 Pro Battery Powered Flash System
- 1200 Pro Flash Head
- 1200 Pro Power Pack
- Flashpoint WB1200 DC36.0V 2.6Ah 96.6Wh Li-ion Battery Pack
- Battery Charger for XPLOR Power 1200 Pro Battery
- AC Connection Cord for Charger
- Reflector
- Glass Protection Cover
- Carrying Case for XPLOR Power 1200 Pro Battery Powered Flash System
- Flashpoint 2-Year USA Warranty
Product Features:
- High-powered 1200WS strobe with real-world GN of 407ft / 124m for expansive coverage
- Versatile flash modes including Manual, TTL, and Multi for diverse photographic needs
- Rapid full-power recycle time of less than 2 seconds and High Speed Sync feature
- Lightweight and portable design, weighing only 12.7 pounds for easy handling
- Compatible with R2 wireless TTL systems from major camera brands for seamless integration
- Power Type: AC and DC
- Series: Flashpoint R2 (XPLOR) Series
- Accessory Mount: Bowens S Mount
- Total Watt Seconds: 1200ws
- TTL Compatibility: TTL Monolight
15 Comments
Sign up for a Slickdeals account to remove this ad.
I have two 600 Pros and one 600 HHS, and the battery on one of the 600 Pros has been constantly charging—showing two solid bars and two blinking bars on the charger. After some research, I learned that the way to revive the battery is by shorting it. It's my fault that I don't remember to regularly charge them but the 2 goods ones I don't need to do this. I think it was in Reddit that I read this, the batteries are sourced from different areas and could simply have a bad batch. I have to do a better job at remembering to charge them at least once every 3-4 months with the one that has the issue.
In case anyone have the battery issue. To revive the battery, you need to:
Remove the battery cover (six small Phillips screws).
Use a thin wire or a paperclip to bridge the two small holes on the side of the battery, creating a short.
After performing this procedure, my battery was able to return to a full charge instead of getting stuck in the charging/blinking state.
Here's the research I found—this issue appears to be a common complaint, and this method is one of the recommended solutions.
Common Battery Complaints
Sudden Battery Failure or Inability to Hold Charge
Some users have experienced batteries that appear fully charged but rapidly deplete or cause the strobe to shut down unexpectedly.
Amazon
+1
Fred Miranda
+1
Batteries Entering "Hibernation Mode"
If left unused for extended periods, batteries may enter a low-voltage state, rendering them unresponsive to standard charging methods. Reviving such batteries often requires specific procedures or tools.
Reddit
Charging Indicator Discrepancies
Instances where the charger indicates a full charge, but the battery's own indicator shows it as empty, have been reported. This inconsistency can lead to confusion about the battery's actual charge status.
🛠️ Potential Solutions and Recommendations
Regular Maintenance: To prevent batteries from entering hibernation, it's advisable to store them at approximately 50% charge and recharge them monthly if not in regular use.
Reddit
Avoid Overcharging: Do not leave batteries on the charger indefinitely, as this can lead to premature degradation.
Warranty and Support: If a battery fails within the warranty period, contact the retailer or manufacturer for a replacement. Some users have successfully obtained replacements for defective batteries.
Alternative Power Sources: Consider using the AC adapter for studio sessions to reduce reliance on battery power.
While the Flashpoint XPLOR 600 series offers powerful and versatile lighting solutions, it's important to be aware of potential battery issues and take proactive steps to maintain battery health.
How to revive the battery by shorting it [youtube.com]