Did this coupon
work for you?
work for you?
Sorry, this deal has expired.
Get notified of deals like this in the future.
Add Deal Alert for this Item
Popular
LaView Doorbell Wi-fi Camera $99 with code EMCPSRR56
$99.00
Coupon Code EMCPSRR56. Limit 2
LaView
1080P Video Doorbell WiFi IP Camera
SKU LV-PDB1520F1
LaView's description:
Crisp HD 1080P clarity with WiFi capabilities (Very good day time picture quality, WDR support, Night time can have IR Glare, if you have IR Glare issue, properly cleaning the outside/inside of the dome lens will greatly improve night time quality)
16GB microSD card included (Motion Detection is recorded on the SD card, you can access the SD card recording via the cloud/push notification, recording are NOT store on vendor cloud, so no subscription fee required, but if the doorbell is offline, you cant access the recording)
180 degree field of view
LaView NVR compatible to act as another IP camera (works with RTSP stream and ONVIF for recording, motion detection on NVR is hit or miss unless you have Hikvision OEM NVR on Hikvision protocol)
IP54 weatherproof
Smart motion detection
Place the Wi-Fi-enabled camera up to 150 feet from your router for instant, easy connection to your network, and view your camera from anywhere with internet access. (note on board Wifi is kind of weak, your Access point or an extender ideally should be close to the doorbell, less than 10ft recommend, less than 20 ft acceptable)
15ft IR night vision (940nm wavelength = no red glow LED for night vision)
Easy firmware upgrade with mobile App
3 face plates included
A one year product warranty and lifetime technical support ensure that your protection is ongoing.
Requires new or existing 16-24 V AC wiring or transformer
https://www.newegg.com/Product/Pr...gnorebbr=1
https://promotions.newe
LaView
1080P Video Doorbell WiFi IP Camera
SKU LV-PDB1520F1
LaView's description:
Crisp HD 1080P clarity with WiFi capabilities (Very good day time picture quality, WDR support, Night time can have IR Glare, if you have IR Glare issue, properly cleaning the outside/inside of the dome lens will greatly improve night time quality)
16GB microSD card included (Motion Detection is recorded on the SD card, you can access the SD card recording via the cloud/push notification, recording are NOT store on vendor cloud, so no subscription fee required, but if the doorbell is offline, you cant access the recording)
180 degree field of view
LaView NVR compatible to act as another IP camera (works with RTSP stream and ONVIF for recording, motion detection on NVR is hit or miss unless you have Hikvision OEM NVR on Hikvision protocol)
IP54 weatherproof
Smart motion detection
Place the Wi-Fi-enabled camera up to 150 feet from your router for instant, easy connection to your network, and view your camera from anywhere with internet access. (note on board Wifi is kind of weak, your Access point or an extender ideally should be close to the doorbell, less than 10ft recommend, less than 20 ft acceptable)
15ft IR night vision (940nm wavelength = no red glow LED for night vision)
Easy firmware upgrade with mobile App
3 face plates included
A one year product warranty and lifetime technical support ensure that your protection is ongoing.
Requires new or existing 16-24 V AC wiring or transformer
https://www.newegg.com/Product/Pr...gnorebbr=1
https://promotions.newe
If you purchase something through a post on our site, Slickdeals may get a small share of the sale.
Check Out Similar Security Cameras Deals
View All
Frontpage
Community Wiki
Last Edited by mat2000
April 2, 2018
at
09:34 AM
Hi guys, some of you may come across this issue and here's a kludge solution
Problem:
Hik-connect App (or LaView Connect or any of the re-branded app) currently use "Media Volume" for the ring tone when someone press a doorbell to start the intercom process and not the Phone call "Ringer volume"
My Media volume is on mute 99% of the time... Therefore, I never hear the hik-connect intercom connection request since its on mute
Solution:
On Android there are free apps that can control volume on a per app basis (I use volume master), it allow you to set any of the volume on an app by app basis when the app comes to the foreground. some also can be set to do a short vibrate when the app is adjusting the volume of the foreground app. So i have set all my volume to 100% when the Hik-connect app is in the foreground which the app WILL pop into the foreground when someone press the doorbell.
Remember to keep your setup secure
Use a VPN, do not port forward
Change Default User/Passwords
Turn off UPnP
For more info Please see
https://ipcamtalk.com/wiki/how-to...et-hacked/
Problem:
Hik-connect App (or LaView Connect or any of the re-branded app) currently use "Media Volume" for the ring tone when someone press a doorbell to start the intercom process and not the Phone call "Ringer volume"
My Media volume is on mute 99% of the time... Therefore, I never hear the hik-connect intercom connection request since its on mute
Solution:
On Android there are free apps that can control volume on a per app basis (I use volume master), it allow you to set any of the volume on an app by app basis when the app comes to the foreground. some also can be set to do a short vibrate when the app is adjusting the volume of the foreground app. So i have set all my volume to 100% when the Hik-connect app is in the foreground which the app WILL pop into the foreground when someone press the doorbell.
Remember to keep your setup secure
Use a VPN, do not port forward
Change Default User/Passwords
Turn off UPnP
For more info Please see
https://ipcamtalk.com/wiki/how-to...et-hacked/
122 Comments
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.
Also, the cam eats up the amps/volts (whatever it is) as I had to remove my NuTone door chime from the circuit! Need to replace with a lower powered chime...
NOTE: Was a better deal the last time...same $99 price but came with a $10 Newegg eGift Card!
Also, the cam eats up the amps/volts (whatever it is) as I had to remove my NuTone door chime from the circuit! Need to replace with a lower powered chime...
NOTE: Was a better deal the last time...same $99 price but came with a $10 Newegg eGift Card!
Or get a higher voltage transformer...
Concur. It has a crappy wifi antenna.
Sign up for a Slickdeals account to remove this ad.
It seems you have to have a computer running BlueIris to connect this to your NVR right?
Currently I have a Lorex NVR system and the hard drive is inside the NVR box. I don't have a computer with BlueIris. I would not be able to connect this doorbell to my NVR (and store the video in the hard drive inside the NVR box) right?
Thanks!
Then find out what circuit breaker turns off your doorbell and see if anything else is connected to the same circuit; e.g. ceiling lights, outlets, etc.
Once you've isolated the circuit, it's a matter of finding where the electrician attached the transformer. My guess is that it's installed on one of the junction boxes or outlets. It might be accessible by unscrewing the bulb, removing the outlet, or junction box. You might have to cut a panel out of the drywall...