There was a recent thread on this being 59.97 in store at Home Depot. Although that said 300lb max, this says 400lb.
The same model number RMS10G at home depot online shows 89 and 300lb: https://www.homedepot.com/p/RYOBI.../205216315
The pre-certified AC9946 is $95 too which is a great price!
This was $99 for quite awhile after Black Friday at Home Depot. I grabbed one to go with the Ryobi 10" sliding miter saw. Haven't put it together yet as I'm redoing my shop setup. I'm sure certified preowned shouldn't be a problem with a stand at all.
This was $99 for quite awhile after Black Friday at Home Depot. I grabbed one to go with the Ryobi 10" sliding miter saw. Haven't put it together yet as I'm redoing my shop setup. I'm sure certified preowned shouldn't be a problem with a stand at all.
Ah I didn't know that, but also at the time I didn't need it. I purchased a home not too long ago and slowly piecing together stuff for a workshop. Purchased pre-owned 10" Sliding Ryobi from Direct Tools for $105 and Ridgid Table Saw for $125 couple weeks ago and now trying to piece together either a stand or some sort of organizing for it/them.
Contemplating between the Ridgid and the Ryobi while taking my space into consideration.
Ah I didn't know that, but also at the time I didn't need it. I purchased a home not too long ago and slowly piecing together stuff for a workshop. Purchased pre-owned 10" Sliding Ryobi from Direct Tools for $105 and Ridgid Table Saw for $125 couple weeks ago and now trying to piece together either a stand or some sort of organizing for it/them.
Contemplating between the Ridgid and the Ryobi while taking my space into consideration.
I hear ya. I grabbed the Ridgid table saw for $90 the last day of the 50% off sale. Unfortunately no stand with it so I'm just waiting on a deal on a nice table saw stand.
That seems to be the only real complaint about the Ridgid miter saw stand is the space it needs.
I hear ya. I grabbed the Ridgid table saw for $90 the last day of the 50% off sale. Unfortunately no stand with it so I'm just waiting on a deal on a nice table saw stand.
That seems to be the only real complaint about the Ridgid miter saw stand is the space it needs.
Ahh nice! Looks like you scored well!
I'm in the same boat. No stand. What do you have your eyes on for, as far a stand goes?
I was thinking even maybe modifying one of these stands by building a base and putting the table saw on it as I've seen others do.
I'm in the same boat. No stand. What do you have your eyes on for, as far a stand goes?
I was thinking even maybe modifying one of these stands by building a base and putting the table saw on it as I've seen others do.
I thought of that but not sure. Haven't decided if I want one that's stationary or with wheels. I think unless a great deal comes up I'm going to wait to see how much space I have once everything else is in place.
I did get a great deal. I went to the Direct Tools store on December 30th to see what they had available for 50% off. I was hoping to get a Ryobi table saw with stand but they were sold out. The employee says we got this Ridgid for $89 that's twice the saw of the Ryobi. I passed on it and all night I was second guessing. So needless to say the next day I went back and bought it. 😀
I thought of that but not sure. Haven't decided if I want one that's stationary or with wheels. I think unless a great deal comes up I'm going to wait to see how much space I have once everything else is in place.
I did get a great deal. I went to the Direct Tools store on December 30th to see what they had available for 50% off. I was hoping to get a Ryobi table saw with stand but they were sold out. The employee says we got this Ridgid for $89 that's twice the saw of the Ryobi. I passed on it and all night I was second guessing. So needless to say the next day I went back and bought it. 😀
You're lucky enough to live close to a store, I'm from CT so have to get everything shipped.
Regardless, I don't know what I want yet and now both the Ryobi and Ridgid stands at DirectTool are sold out 😂 I'll figure out what I want and then buy next time I see a deal. Wasn't prepared for this haha!
You're lucky enough to live close to a store, I'm from CT so have to get everything shipped.
Regardless, I don't know what I want yet and now both the Ryobi and Ridgid stands at DirectTool are sold out 😂 I'll figure out what I want and then buy next time I see a deal. Wasn't prepared for this haha!
It's 40 miles for me but I've traveled further for stupid reasons. 😀
Good luck!
Thanks guys! I've been looking for a tablesaw, and never checked this site before. Got a refurb Ryobi for $90 and it's going for $199 on Home Depot. Thanks for the comments!
This is a nice stand if a deal comes around on it again (currently OOS). I have my 12" Delta miter saw on it. Sits stationary in my garage shop, but has been great until I can find time to build my own miter saw station. Think I got it on a post Christmas sale about 5 years ago.
22 Comments
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.
This was $99 for quite awhile after Black Friday at Home Depot. I grabbed one to go with the Ryobi 10" sliding miter saw. Haven't put it together yet as I'm redoing my shop setup. I'm sure certified preowned shouldn't be a problem with a stand at all.
Ah I didn't know that, but also at the time I didn't need it. I purchased a home not too long ago and slowly piecing together stuff for a workshop. Purchased pre-owned 10" Sliding Ryobi from Direct Tools for $105 and Ridgid Table Saw for $125 couple weeks ago and now trying to piece together either a stand or some sort of organizing for it/them.
Contemplating between the Ridgid and the Ryobi while taking my space into consideration.
Contemplating between the Ridgid and the Ryobi while taking my space into consideration.
I hear ya. I grabbed the Ridgid table saw for $90 the last day of the 50% off sale. Unfortunately no stand with it so I'm just waiting on a deal on a nice table saw stand.
That seems to be the only real complaint about the Ridgid miter saw stand is the space it needs.
That seems to be the only real complaint about the Ridgid miter saw stand is the space it needs.
Ahh nice! Looks like you scored well!
I'm in the same boat. No stand. What do you have your eyes on for, as far a stand goes?
I was thinking even maybe modifying one of these stands by building a base and putting the table saw on it as I've seen others do.
I'm in the same boat. No stand. What do you have your eyes on for, as far a stand goes?
I was thinking even maybe modifying one of these stands by building a base and putting the table saw on it as I've seen others do.
I thought of that but not sure. Haven't decided if I want one that's stationary or with wheels. I think unless a great deal comes up I'm going to wait to see how much space I have once everything else is in place.
I did get a great deal. I went to the Direct Tools store on December 30th to see what they had available for 50% off. I was hoping to get a Ryobi table saw with stand but they were sold out. The employee says we got this Ridgid for $89 that's twice the saw of the Ryobi. I passed on it and all night I was second guessing. So needless to say the next day I went back and bought it. 😀
I did get a great deal. I went to the Direct Tools store on December 30th to see what they had available for 50% off. I was hoping to get a Ryobi table saw with stand but they were sold out. The employee says we got this Ridgid for $89 that's twice the saw of the Ryobi. I passed on it and all night I was second guessing. So needless to say the next day I went back and bought it. 😀
You're lucky enough to live close to a store, I'm from CT so have to get everything shipped.
Regardless, I don't know what I want yet and now both the Ryobi and Ridgid stands at DirectTool are sold out 😂 I'll figure out what I want and then buy next time I see a deal. Wasn't prepared for this haha!
Sign up for a Slickdeals account to remove this ad.
Regardless, I don't know what I want yet and now both the Ryobi and Ridgid stands at DirectTool are sold out 😂 I'll figure out what I want and then buy next time I see a deal. Wasn't prepared for this haha!
It's 40 miles for me but I've traveled further for stupid reasons. 😀
Good luck!
By the time I realized it, it was late on the last day, and didn't help many others by the time I posted about it.
By the time I realized it, it was late on the last day, and didn't help many others by the time I posted about it.
There was a thread regarding the 50% in store deal. I can't remember now if it was it's own thread or in some of the other Direct Tools deals.