| F1 - Audio meters: Places an audio meter on the screen to monitor the level of incoming audio. |
| F2 - Peaking: Adds a selectable color outline to any part of the image that is in focus. |
| F3 - False color: Replaces the true colors of the image with a standard set of colors. |
| F4 - HDR (HLG): Uses the display's luminance range to correctly display an incoming HLG signal. This function can be used in tandem with any applied LUT. |
| Adjusts the aspect ratio of the incoming video signal and how it is displayed on screen. Select between Off (default), 80%, 90%, 15:9,1.33:1, 1.5:1, 1.85:1, 2:1, 2.35:1, and Custom. |
| (On, Off) When turned on, the areas outside the guide are dimmed. The default setting is On. |
| (On, Off) Puts a crosshair at the center of the screen. The default setting is Off. |
| (Off, 1-10) Creates grids on screen with 1 to 10 subdivisions. The default setting is Off. Pressing the Exit button will disable any enabled guides, one at a time. |
| Adjusts the monitor's brightness value from 0 to 100. The default setting is 50. |
| Adjusts the contrast value of the on-screen image from 0 to 100. The default setting is 50. |
| Adjusts the chroma value of the on-screen image. The default setting is 50. |
| Adjusts the value of fine detail on the picture from 1 to 100 in increments of 10. The default setting is 30. |
| Adjusts the tint value from 0 to 100. The default setting is 50. |
| Presets are 5600, 6500 (default), 7500, 9300, and Manual. When User mode is selected, the values of red, green, and blue can be set manually from 0 to 255. Red, green, and blue are preset to 128. |
| Adjusts the intensity of the backlight. Options are Low, Middle, and High (default). |
| Adjusts the aspect ratio of the incoming video signal and how it is displayed on screen. Options are User, 16:9 (default), 15:9, 1.33:1, 1.5:1,1.85:1, 2:1, and 2.35:1. In User mode, height and width can be adjusted from 50 to 100. The default setting is 100. |
| You can set the on-screen language to English (default) or Chinese. |
| Set the length of time the on-screen menu is displayed. Select 5, 10 (default), 15, 20, 25, or 30 seconds, or Off (the menu will be displayed until the user exits the menu). |
| Set the menu's level of opacity. You can adjust this setting to Low (default), Middle, High, or Off, with High being the most transparent. The default setting is Low, which makes the menu opaque. |
| Recalls monitor settings. |
| Resets the monitor to the factory default settings and removes any loaded LUTs. |
| Displays Flip mode controls the orientation of the on-screen image. Flip the screen vertically or horizontally with the H Flip and V Flip options. |
| OSD Flip mode controls the orientation of the on-screen display. Flip the menu vertically or horizontally with the H Flip and V Flip options. |
| Places an icon in the upper-left corner of the screen that displays the remaining battery voltage. Select On (default) or Off. |
| Sets the level of the internal cooling fan. Options are High, Medium (default), and Low. |
| Turns the touch control feature on or off. |
| The four function buttons (F1-4) on the top of the monitor allow you to quickly access monitor functions and they are user programmable. By default, the function buttons are set as follows:F1 - Audio meters: Places an audio meter on the screen to monitor the level of incoming audio.F2 - Peaking: Adds a selectable color outline to any part of the image that is in focus.F3 - False color: Replaces the true colors of the image with a standard set of colors.F4 - HDR (HLG): Uses the display's luminance range to correctly display an incoming HLG signal. This function can be used in tandem with any applied LUT. |
| The monitor features a touchscreen that allows you to access the monitor's signal status, menu settings, and function displays. Double-tapping the screen turns the pixel-to-pixel function on or off. You can also use the pinch-to-zoom finger command as with most smartphones or tablets. |
| This menu allows you to apply 17x17x17 .cube LUT files to color grade your footage. You can choose a LUT from one stored in the monitor's memory, or upload one from a USB flash drive. The included flash drive includes three LUTs, one each for Canon, Panasonic, and Sony cameras. |
| GUIDESAdjusts the aspect ratio of the incoming video signal and how it is displayed on screen. Select between Off (default), 80%, 90%, 15:9,1.33:1, 1.5:1, 1.85:1, 2:1, 2.35:1, and Custom.GUIDE MASKS(On, Off) When turned on, the areas outside the guide are dimmed. The default setting is On.CROSSHAIR(On, Off) Puts a crosshair at the center of the screen. The default setting is Off.GRIDS(Off, 1-10) Creates grids on screen with 1 to 10 subdivisions. The default setting is Off. Pressing the Exit button will disable any enabled guides, one at a time.BRIGHTNESSAdjusts the monitor's brightness value from 0 to 100. The default setting is 50.CONTRASTAdjusts the contrast value of the on-screen image from 0 to 100. The default setting is 50.CHROMAAdjusts the chroma value of the on-screen image. The default setting is 50.SHARPNESSAdjusts the value of fine detail on the picture from 1 to 100 in increments of 10. The default setting is 30.TINTAdjusts the tint value from 0 to 100. The default setting is 50.COLOR TEMPERATUREPresets are 5600, 6500 (default), 7500, 9300, and Manual. When User mode is selected, the values of red, green, and blue can be set manually from 0 to 255. Red, green, and blue are preset to 128.BACKLIGHTAdjusts the intensity of the backlight. Options are Low, Middle, and High (default).ASPECTAdjusts the aspect ratio of the incoming video signal and how it is displayed on screen. Options are User, 16:9 (default), 15:9, 1.33:1, 1.5:1,1.85:1, 2:1, and 2.35:1. In User mode, height and width can be adjusted from 50 to 100. The default setting is 100.OSD LANGUAGEYou can set the on-screen language to English (default) or Chinese.OSD DURATIONSet the length of time the on-screen menu is displayed. Select 5, 10 (default), 15, 20, 25, or 30 seconds, or Off (the menu will be displayed until the user exits the menu).OSD TRANSPARENCYSet the menu's level of opacity. You can adjust this setting to Low (default), Middle, High, or Off, with High being the most transparent. The default setting is Low, which makes the menu opaque.MENU SETUPRecalls monitor settings.SYSTEM RESETResets the monitor to the factory default settings and removes any loaded LUTs.FLIP CONTROLDisplays Flip mode controls the orientation of the on-screen image. Flip the screen vertically or horizontally with the H Flip and V Flip options.OSD Flip mode controls the orientation of the on-screen display. Flip the menu vertically or horizontally with the H Flip and V Flip options.BATTERY VOLTAGE DISPLAYPlaces an icon in the upper-left corner of the screen that displays the remaining battery voltage. Select On (default) or Off.FANSets the level of the internal cooling fan. Options are High, Medium (default), and Low.TOUCH CONTROLTurns the touch control feature on or off. |
| The swing arm comes with two mounted cold shoes. You can remove the cold shoes from the swing arm using the included Allen wrench. |
| An option to control select cameras is separately available, see manual for more information. |
| 5" 1920 x 1080 LCD Display |
| HDMI I/O Supports 4K, HD |
| 1500 cd/m² Max. Brightness |
| 1000:1 Contrast Ratio |
| 160° Viewing Angle |
| Four Assignable Function Buttons |
| Focus Peaking |
| Pixel-to-Pixel |
0 Comments