Did this coupon
work for you?
work for you?
Sorry, this deal has expired.
Get notified of deals like this in the future.
Add Deal Alert for this Item
Frontpage
Ryobi 18-Volt ONE+ Li-Ion Cordless 1/2" Impact Wrench w/ Battery, Charger & Bag Expired
$109
$307.00
+ Free Shipping
HomeDepot.com has Ryobi 18-Volt ONE+ Lithium-Ion Cordless 1/2" Impact Wrench w/ 1 x 4.0Ah Battery, Charger & Bag (P1833) for $109. Shipping is free. Thanks SlickMallard4288
Original Post
Written by
Edited June 4, 2020
at 01:08 AM
I'm not a pro but I thought this was an ok deal...
18-Volt ONE+ Lithium-Ion Cordless 3-Speed 1/2 in. Impact Wrench Kit with (1) 4.0 Ah Battery, 18-Volt Charger, and Bag
https://www.homedepot.c
18-Volt ONE+ Lithium-Ion Cordless 3-Speed 1/2 in. Impact Wrench Kit with (1) 4.0 Ah Battery, 18-Volt Charger, and Bag
https://www.homedepot.c
in
Tools
(6)
Get Home Depot coupons
If you purchase something through a post on our site, Slickdeals may get a small share of the sale.
Check Out Similar Tools Deals
View AllFrontpage
$88.65
+ Free Shipping
126
108
104 Comments
Your comment cannot be blank.
Featured Comments
Using extensions from the drill to the lugnut doesn't add any leverage at all. In fact, the extra length just allows for more twisting, which demands more power to get same amount of torque (its simply the fact that the twisting causes some power loss... Imagine using a rubber screwdriver to turn a screw 😂).
"Longer" on a breaker bar adds LEVERAGE, which is why it's so much easier to turn a screw/bolt with a ratchet vs. a screwdriver (the ratchet handle adds leverage).
Fun physics fact - if you double (or triple, or whatever) the handle on a breaker bar or ratchet, you are doubling (or tripling) the power you have at the point of rotation. So if you stand on a one foot handle, the ft/lbs of torque is whatever you weigh. But if you stand on a three foot handle, the power you are applying is triple your weight.
That's why Archimedes said "give me a lever long enough and a fulcrum to place it, and I'll move the world".
Or something like that.
https://www.hfqpdb.com/coupons/29...0.8464.png
Sign up for a Slickdeals account to remove this ad.
I have the Ridgid Brushless one and it works great
If you can you can often get the Ridgid brushless for $149 and it has lifetime warranty and more power, but for lugnuts and general use I'm guessing this Ryobi works just fine and you save some cash
Our community has rated this post as helpful. If you agree, why not thank LTD2019
I bought it for a little less. But still a solid deal at $72.
I bought it for a little less. But still a solid deal at $72.
This is also certified pre-owned, which only has a 1 year warranty. Personally, the 3 year warranty and not having to worry about who had it before me and how it was used, for the peace of mind is worth the few extra bucks.
Sign up for a Slickdeals account to remove this ad.
https://www.hfqpdb.com/coupons/29...0.8464.png
I have some Pittsburgh Pro deep well impact-rated sockets from Harbor Freight that work really well
https://www.hfqpdb.com/coupons/29...0.8464.png
This is a much better deal not just because of the extra 2 year warranty but also because you can easily sell the battery and charger for $65 if you don't need them, making the wrench essentially $51, plus you get the case to store it in.
Brushless would be nice to have though, you occasionally smell the ozone with this and it can get quite warm under prolonged use.
As for power, well I used it on some factory locktite subframe bolts. This was slowly spinning the bolts, something I could only do by hand with a 24" cheeter bar...