How did you make the openings in the foam? Do you pull it out or cut it somehow?
The foam inserts are little rectangular shapes. Imagine graph paper. Each square extends to the bottom. There is no half way down. You pull one square out, it goes to the bottom. It works. You need the full depth of the box to fit everything. But be careful pulling out the squares, you don't want to lose integrity. I just put the mavic over the foam and saw what pieces needed to be removed. Took me 5 mins. Fit everything from the fly combo.
The foam inserts are little rectangular shapes. Imagine graph paper. Each square extends to the bottom. There is no half way down. You pull one square out, it goes to the bottom. It works. You need the full depth of the box to fit everything. But be careful pulling out the squares, you don't want to lose integrity. I just put the mavic over the foam and saw what pieces needed to be removed. Took me 5 mins. Fit everything from the fly combo.
Once you have the foam pulled and fit everything in. buy a can of plasti dip and spray the foam. it will seal and stiffen the foam so it doesnt fall apart. works great
6 Comments
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.