Ace Hardware has select Stanley Tools on sale for $4.99 each. To earn 2.5% in Slickdeals Cashback, before purchase, follow the cashback instructions below. Select free curbside pickup where available.
Thanks to Deal Editor powerfuldoppler for finding this deal.
I ordered two of these the last time it went on sale. One broke almost immediately, it was assembled very poorly. The other one is still going strong. I bought another with this deal, hoping that my previous experience was a fluke. In any case, I'll keep the receipt this time. YMMV.
The utility blades and tape measure are ok for the price.
The wonder bar is too 'springy' ... a lot of give/bending before anything starts to move. The chisels cannot be used with a hammer and last very long.... they need at least a metal cap, but better if the metal tang went through the handle . If going to use by hand, it would be best to know how to sharpen them and often.
This is why one would generally use a rubber mallet with a chisel. The tips are sharp for a reason; most things one would be chiseling don't require a ton of force, so a hammer isn't necessary. When chiseling materials that do require more force, a dead blow is still preferable to a traditional hammer. I don't even strike my full-tang, metal-capped chisels with a metal hammer. That's a good way to break a chisel tip and/or cut deeper than intended.
Our community has rated this post as helpful. If you agree, why not thank ToolDeals
04-01-2021 at 05:16 AM.
The utility blades and tape measure are ok for the price.
The wonder bar is too 'springy' ... a lot of give/bending before anything starts to move. The chisels cannot be used with a hammer and last very long.... they need at least a metal cap, but better if the metal tang went through the handle . If going to use by hand, it would be best to know how to sharpen them and often.
Tools like these are surprisingly useful especially the 5 in one tool with curved blade is ideal for electrics. Does a better job than the tool set thats made specifically for that purpose. Plus you can normally find it at Walmart for $5 instead of $40 and having to wait for delivery to arrive
Tools like these are surprisingly useful especially the 5 in one tool with curved blade is ideal for electrics. Does a better job than the tool set thats made specifically for that purpose. Plus you can normally find it at Walmart for $5 instead of $40 and having to wait for delivery to arrive
64 Comments
Your comment cannot be blank.
Featured Comments
The wonder bar is too 'springy' ... a lot of give/bending before anything starts to move. The chisels cannot be used with a hammer and last very long.... they need at least a metal cap, but better if the metal tang went through the handle . If going to use by hand, it would be best to know how to sharpen them and often.
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank ToolDeals
The wonder bar is too 'springy' ... a lot of give/bending before anything starts to move. The chisels cannot be used with a hammer and last very long.... they need at least a metal cap, but better if the metal tang went through the handle . If going to use by hand, it would be best to know how to sharpen them and often.
Our community has rated this post as helpful. If you agree, why not thank JustinCarterGT
Sign up for a Slickdeals account to remove this ad.
https://www.acehardware
Thank you. Wriggedy Wriggedy Repped ya'll