Original Post
Written by
Edited May 26, 2021
at 09:52 AM
by
I've been eyeing this garage door for awhile and it's finally on sale. Normally $245, now 20% off for $195 with free shipping or free store pick up. This garage door is CA compliant since it has a backup battery.
I also got the professional installation for an additional $87. Also not a bad deal considering quotes I got from contractors were $150 to $200 just for install.
https://www.homedepot.com/p/Chamb...67#overlay
Amazon also has the same garage door for the same price
https://www.amazon.com/dp/B075CQ86ZV/ Expired
Others are reporting you can purchase installation only through this link:
https://www.homedepot.com/c/cost_install_repair_garage_doors_openers?cm_mmc=hsem-cg-faqāā [homedepot.com]
HD contracts out to 3rd party installers. The installation includes:
Installation Process
After your order has been confirmed, one of our professionals will call you within two business day to schedule a date and time for installation.
*Pricing subject to change due to increased scope of work or required code regulations
Price Includes
Removing and hauling away old garage door opener
Installing new customer supplied garage door opener
Installing new motion sensors
Testing new garage door opener and cleaning up debris
Price includes install for Garage Doors up to 8 ft. tall
I ordered on 21st, shipped & delivered on 22nd and installed today!
302 Comments
Your comment cannot be blank.
Featured Comments
Sign up for a Slickdeals account to remove this ad.
A note on my Home Depot third party installer. I purchased the opener and install package on the 5/24, installer called next day, scheduled, and installed on 5/27. Installer took about 2 1/2 hours, didn't use the instructions as it was unopened. He tried to use the existing sensor wires with the new sensors but had issues so had to run the new sensor wires. Then ran into issues with new wires because he damaged one of the wire when stapling it to the wall. I also took a look at the install once he left, he didn't remove the nut ring on the spring so I had to do that and he also didn't bend the tab up on rail. Not sure the tab is critical, but the belt definitely needed to have the nut ring on the spring removed as there was barely any tension on it.
TIA!