Staples has
CyberPower Intelligent LCD 1500VA 12-Outlets UPS System (Black, CP1500AVRLCD) for
$114.95 after coupon code
26667. To earn Slickdeals Cashback, before purchase, follow the cashback instructions below (PC extension required, before checkout).
Shipping is free.
Thanks to Community Member
suhas2000 for finding this deal.
Instructions: - Click here and add to cart
- Proceed to checkout
- Apply coupon code 26667
- Price will be $114.95 + Free shipping
Specs/features: - Surge energy rating: 1500 joules
- Equipped with 12 surge-protected outlets for seamless connectivity (6 battery-connected)
- Product Dimensions are 3.9"W x 11"H x 14"D with a Cord Length of 6 ft (1.8 m).
- Multifunction LCD Panel - Displays immediate, detailed information on the UPS battery and power conditions, alerting users to potential problems before they can affect critical equipment and cause downtime.
- This UPS has a Runtime of 3 min at Full Load and a Runtime of 12 min at Half Load with a recharge time of 8 hours. The Nominal Input Voltage is 120 VAC using an input plug type NEMA 5-15P.
- Meets or exceeds UL1778, cUL 107 5th, FCC DOC Class B, RoHS, ENERGY STAR standards
- Featuring serial and USB interfaces for communication and management, this UPS provides surge protection and filtering for RJ11/RJ45 (in/out combo) ports and coax lines (in/out)
42 Comments
Your comment cannot be blank.
Featured Comments
tl;dr: Your monitors, router, etc. won't care about simulated vs. pure sine wave, but your computer's power supply might.
Longer explanation - electronics experts, please do correct any inaccuracies in this because I do want to fully understand it, but right now am just confident enough to potentially be completely misunderstanding things.
AC power comes in alternating waves of highs and lows. Typical power runs in a sine wave (even up, then down, then up, then down) patterns. Pure sine wave battery backups will also generate this same up, down, up, down pattern at precise intervals.
A device that is simulated sine wave will approximate this pattern, but it won't be as precise. This is a far cheaper alternative for devices that don't really care about sine waves.
The issue comes in with a PFC power supply like most computers have. The power protection circuits on the power supply will not always like the simulated sine wave output from a non pure sine wave device, and if that circuit is tripped in the power supply, your PC will power off to attempt to protect your PCs internal parts from being fried. This is typically a good thing since if you weren't using a UPS, a non sine pattern could indicate a short, surge, or other power fault that could very well fry your PCs components.
Now, the real caveat here, is that it is kind of up in the air whether your PC's specific power supply will be sensitive enough to care about the differences this UPS will produce. Some will, and some will not.. From my experience it isn't even always consistent between power supplies of the same model.
Sign up for a Slickdeals account to remove this ad.
CyberPower Intelligent LCD 1500VA UPS, 12-Outlets, Black (CP1500AVRLCD)
Pardon my ignorance but what exactly does that mean if I just need it to back up my computer and monitor/peripherals?
Our community has rated this post as helpful. If you agree, why not thank Tasoril
So, I'm pretty limited in my electronics knowledge, therefore the below may not be entirely accurate, but as for my understanding of it..
tl;dr: Your monitors, router, etc. won't care about simulated vs. pure sine wave, but your computer's power supply might.
Longer explanation - electronics experts, please do correct any inaccuracies in this because I do want to fully understand it, but right now am just confident enough to potentially be completely misunderstanding things.
AC power comes in alternating waves of highs and lows. Typical power runs in a sine wave (even up, then down, then up, then down) patterns. Pure sine wave battery backups will also generate this same up, down, up, down pattern at precise intervals.
A device that is simulated sine wave will approximate this pattern, but it won't be as precise. This is a far cheaper alternative for devices that don't really care about sine waves.
The issue comes in with a PFC power supply like most computers have. The power protection circuits on the power supply will not always like the simulated sine wave output from a non pure sine wave device, and if that circuit is tripped in the power supply, your PC will power off to attempt to protect your PCs internal parts from being fried. This is typically a good thing since if you weren't using a UPS, a non sine pattern could indicate a short, surge, or other power fault that could very well fry your PCs components.
Now, the real caveat here, is that it is kind of up in the air whether your PC's specific power supply will be sensitive enough to care about the differences this UPS will produce. Some will, and some will not.. From my experience it isn't even always consistent between power supplies of the same model.
Great topic:
As I understand, batteries (charged by the grid) will emit a pure sin wave i.e. "cleaner"and safer for electronics and appliances due to minimal fluctuations in amps or voltage. However, it seems @greyson76 is implying that perhaps this is simply simply a pass-through device that will not use the batterys properties but only use battery power in the event of a power outage.
I would love to hear more about this topic from anyone whom is in the biz or has knowledge.
Sign up for a Slickdeals account to remove this ad.
tl;dr: Your monitors, router, etc. won't care about simulated vs. pure sine wave, but your computer's power supply might.
Our community has rated this post as helpful. If you agree, why not thank Greyson76
As I understand, batteries (charged by the grid) will emit a pure sin wave i.e. "cleaner"and safer for electronics and appliances due to minimal fluctuations in amps or voltage. However, it seems @greyson76 is implying that perhaps this is simply simply a pass-through device that will not use the batterys properties but only use battery power in the event of a power outage.
I would love to hear more about this topic from anyone whom is in the biz or has knowledge.
As I understand, batteries (charged by the grid) will emit a pure sin wave i.e. "cleaner"and safer for electronics and appliances due to minimal fluctuations in amps or voltage. However, it seems @greyson76 is implying that perhaps this is simply simply a pass-through device that will not use the batterys properties but only use battery power in the event of a power outage.
I would love to hear more about this topic from anyone whom is in the biz or has knowledge.
Not really a deal, it comes up everytime there is a staple coupon.
A pure sine wave UPS at $130 will be hot which hasn't happened for over a year.