Original Post
Written by
Edited December 1, 2021
at 12:47 PM
by
MSRP: $499
Sale price: $440
Black Friday Sale Extra 20% OFF (worked for me today - Saturday)
Final Price $352
Seems to be a decent welder at a very good price. Small job / hobby welder.
Many real reviews and independent demo videos.
Yes Welder MIG-205DS 3 in 1 Welding Machine
110v/220v Dual Voltage
Gas MIG
Gasless MIG
Lift TIG
Stick 4 in 1
Synergic Controled MIG Setting
Ideal for 7018/6011 electrode
IGBT Inverter Welder
https://yeswelder.com/products/mig-welder-mig205
104 Comments
Your comment cannot be blank.
Featured Comments
I weld a good bit for stuff which has to stay together. If it's not Miller, Lincoln or comparable (if there is comparable) I'm not wasting my money on it. I've seen lots of "inexpensive" welders which either don't work long or have no parts/service. I look at these low priced things all the time seeking one which is modestly priced but still works. Haven't found that yet.
If you want TiG, budget about 3 grand for a start. You need a foot control high frequency welder, a GOOD gun, a dedicated grinder with a wheel used only for sharpening the
TiG tips and a work area clean of contaminants.
Now, MIG isn't nearly that demanding, but you still need grinders, cutting tools, aprons, GOOD helmet(s), gloves, etc.
110V welders are good for sheet medal and that's about it as they're limited to maybe 110-120 amps. You must have 220V and preferably 50 amp service if you're going to weld much. Otherwise you're better off finding a good welding shop near you and having them do it right. I still use a welding shop for heavy work or aluminum.
As an analogy, I have two lathes, two mills and two drill presses in my shop. But I still use a "real" machine shop for heavy work.
Welding can be fun and you can learn to do it well. But it's not entirely trivial and you will have to spend quite a bit more that $350 to even begin to do it poorly not to mention well.
Next up: "Bruh replaces R-134a in mom's car A/C and recaptures 100% BLINDFOLDED!"
Nobody can do anything to hurt Americans more than we hurt ourselves.
Sign up for a Slickdeals account to remove this ad.
On a somewhat serious note, any similar models to look at? A decade ago back in the other country (where 220v is a standard voltage) I had a small noname inverter stick welder that served me very good in a rural area with some minor backyard repairs/projects. Would this one be a good versatile choice or should I rather look at Harbor Freight's Titanium multi-process one (which is unfortunately closer to $900 in price...) to have MIG/stick/TIG?
Thanks!
https://www.eastwood.co
I weld a good bit for stuff which has to stay together. If it's not Miller, Lincoln or comparable (if there is comparable) I'm not wasting my money on it. I've seen lots of "inexpensive" welders which either don't work long or have no parts/service. I look at these low priced things all the time seeking one which is modestly priced but still works. Haven't found that yet.
If you want TiG, budget about 3 grand for a start. You need a foot control high frequency welder, a GOOD gun, a dedicated grinder with a wheel used only for sharpening the
TiG tips and a work area clean of contaminants.
Now, MIG isn't nearly that demanding, but you still need grinders, cutting tools, aprons, GOOD helmet(s), gloves, etc.
110V welders are good for sheet medal and that's about it as they're limited to maybe 110-120 amps. You must have 220V and preferably 50 amp service if you're going to weld much. Otherwise you're better off finding a good welding shop near you and having them do it right. I still use a welding shop for heavy work or aluminum.
As an analogy, I have two lathes, two mills and two drill presses in my shop. But I still use a "real" machine shop for heavy work.
Welding can be fun and you can learn to do it well. But it's not entirely trivial and you will have to spend quite a bit more that $350 to even begin to do it poorly not to mention well.
I'm actually a bigger fan of the hand controls. I used one recently and it's much more intuitive for beginners. I'm not sure on pricing differences but I can't imagine they are more than a good wireless foot pedal.
I will warn everyone who will listen to be careful with zinc plantings and galvanized coatings. That is NASTY stuff. A respirator is a VERY good idea if yo have the misfortune of having to weld anything galvanized.
You might think about phosphoric acid. That can buy you some time staving off corrosion. Not sure how weldable it is, though. Just an unproven idea off the internet.
If tis is not the right choice for flux core what should I get instead?
Or am I being too clueless to know that I'll eventually want to do gas MiG with this machine?
Sign up for a Slickdeals account to remove this ad.
https://www.eastwood.co
I weld a good bit for stuff which has to stay together. If it's not Miller, Lincoln or comparable (if there is comparable) I'm not wasting my money on it. I've seen lots of "inexpensive" welders which either don't work long or have no parts/service. I look at these low priced things all the time seeking one which is modestly priced but still works. Haven't found that yet.
If you want TiG, budget about 3 grand for a start. You need a foot control high frequency welder, a GOOD gun, a dedicated grinder with a wheel used only for sharpening the
TiG tips and a work area clean of contaminants.
Now, MIG isn't nearly that demanding, but you still need grinders, cutting tools, aprons, GOOD helmet(s), gloves, etc.
110V welders are good for sheet medal and that's about it as they're limited to maybe 110-120 amps. You must have 220V and preferably 50 amp service if you're going to weld much. Otherwise you're better off finding a good welding shop near you and having them do it right. I still use a welding shop for heavy work or aluminum.
As an analogy, I have two lathes, two mills and two drill presses in my shop. But I still use a "real" machine shop for heavy work.
Welding can be fun and you can learn to do it well. But it's not entirely trivial and you will have to spend quite a bit more that $350 to even begin to do it poorly not to mention well.
I weld a good bit for stuff which has to stay together. If it's not Miller, Lincoln or comparable (if there is comparable) I'm not wasting my money on it. I've seen lots of "inexpensive" welders which either don't work long or have no parts/service. I look at these low priced things all the time seeking one which is modestly priced but still works. Haven't found that yet.
If you want TiG, budget about 3 grand for a start. You need a foot control high frequency welder, a GOOD gun, a dedicated grinder with a wheel used only for sharpening the
TiG tips and a work area clean of contaminants.
Now, MIG isn't nearly that demanding, but you still need grinders, cutting tools, aprons, GOOD helmet(s), gloves, etc.
110V welders are good for sheet medal and that's about it as they're limited to maybe 110-120 amps. You must have 220V and preferably 50 amp service if you're going to weld much. Otherwise you're better off finding a good welding shop near you and having them do it right. I still use a welding shop for heavy work or aluminum.
As an analogy, I have two lathes, two mills and two drill presses in my shop. But I still use a "real" machine shop for heavy work.
Welding can be fun and you can learn to do it well. But it's not entirely trivial and you will have to spend quite a bit more that $350 to even begin to do it poorly not to mention well.
Struggling between that and the Titanium unlimited 200 from HF that sell on FB for around 500-600. The Titanium comes already with TIG torch and regulator
Sign up for a Slickdeals account to remove this ad.