Direct Tools Outlet has
Ryobi 15-Amp 10" Sliding Compound Miter Saw with LED Cutline Indicator (Refurbished, ZRTSS103) for
$89.99. Shipping is a flat rate $9.99.
Thanks to Community Member
JMBauer74 for finding this deal.
Includes:- ZRTSS103T Miter Saw with LED
- 40-Tooth Carbide-Tipped Blade
- Table Extensions
- Work Clamp
- Blade Wrench
- Dust Bag
- Operator's Manual
Features:- 15 Amp, 4600 RPM motor with 12 in. Cross Cut Capacity
- Includes: 10 in. 40-Tooth Carbide Tipped Blade and Accessories
- LED Cutline Indicator provide improved cut accuracy
- Sliding head provides maximum capacity for up to 12 in. cross cut
- Miter stops located at the most common crown molding angles 0°, 15°, 22.5°, 31.6°, and 45° left and right for quick cut settings
- Miter Detent Override: Quick action lever bypasses miter detent index points with one simple motion
- Machined cast-in miter scale for accurate table alignment
- Electric brake stops the blade in seconds
- Spindle lock for easy single wrench blade changes
- Extended miter range from 47° left and right to accommodate a wide variety of cuts
- Fixed Dust Port maintains the ideal position to optimize dust collection efficiencies for both plunge and sliding cuts
- 1-1/4 in. dust port provides connection to standard dust collection systems to help keep work area clean
- Horizontal "D" handle for improved comfort
84 Comments
Your comment cannot be blank.
Featured Comments
I looked up a couple of Youtube videos on how to calibrate a miter saw, bought a carpenter square on amazon for $8, and checked on the blade alignment. I found the miter 0 degree angle was perfect, but the bevel was a bit off. Thankfully they make both the miter angle and bevel angle easily adjusted, so after a few iterations of adjusting and checking I was able to get my saw nice and square.
Here's the video I ended up using to check the fence-to-blade alignment: https://www.youtube.com/watch?v=aB-QJ1B6toY
Although it did take a bit of extra work to get the saw set up, I think it was an excellent deal and I've already used it to build the Ana White garage shelves and used the sliding feature to cut a 10" wide shelf to length for the laundry room. The LED blade shadow feature is really cool, and I found it to be accurate. I will say the dust extraction port is pretty much useless, so you may want to do your cutting outside to avoid getting sawdust everywhere, as it ejects a lot of dust at high speed. I haven't tried cutting any bevels or non-90 degree angles yet, so I don't yet know how accurate the detents are.
It survived ok, guess it is a well built saw.
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank kaimanson
As many have said this saw comes without any padding. Mine was fine and after calibration it works well.
Delivery took a very long time but I did eventually get all the tools I ordered and they all work. The saw took 3 weeks along with a compressor I got. The other tools took 4 weeks. This was part of the 30% off they had a while back so maybe it was slower than usual.
When I wrote to ask when they were shipping they did reply about 3 days later. All the tools came with a manual and a sample worth of consumables (2 strips of staples for the staple gun, one blade for the reciprocating saw)
There were only a few minor signs of these not being brand new. Some light scratches on the back of the saw cover for example.
I would order from them again if they have a really good sale and I don't need the tools for a month.
Sign up for a Slickdeals account to remove this ad.
I looked up a couple of Youtube videos on how to calibrate a miter saw, bought a carpenter square on amazon for $8, and checked on the blade alignment. I found the miter 0 degree angle was perfect, but the bevel was a bit off. Thankfully they make both the miter angle and bevel angle easily adjusted, so after a few iterations of adjusting and checking I was able to get my saw nice and square.
Here's the video I ended up using to check the fence-to-blade alignment: https://www.youtube.com/watch?v=aB-QJ1B6toY
Although it did take a bit of extra work to get the saw set up, I think it was an excellent deal and I've already used it to build the Ana White garage shelves and used the sliding feature to cut a 10" wide shelf to length for the laundry room. The LED blade shadow feature is really cool, and I found it to be accurate. I will say the dust extraction port is pretty much useless, so you may want to do your cutting outside to avoid getting sawdust everywhere, as it ejects a lot of dust at high speed. I haven't tried cutting any bevels or non-90 degree angles yet, so I don't yet know how accurate the detents are.
How long did shipping take?
Sign up for a Slickdeals account to remove this ad.
What does the manual say? I don't see laser in the title or description