Walmart has
208-Piece Hyper Tough Rotary Tool Accessory Kit with Storage Case (AU50064A) for
$9.88.
Shipping is free with Walmart+ (
free trial) or on orders of $35 or more.
Thanks to Community Member
chi for posting this deal.
Key Features:
- The set consists of 20 sanding bands, 1 cloth wheel, 6 felt wheels, 1 rubber emery wheel, 3 HSS drill bits, 2 sanding shanks, 4 diamond cutters, 3 HSS cutters, 10 grinding wheels with shank, 12 grinding wheels, 3 nylon brushes, 3 wire brushes, 3 brass brushes, 1 polishing compound, 30 heavy duty cut off wheels, 46 regular cut off wheels, 44 sanding discs, 4 replacement collets, 2 mandrel cut off wheels, 1 mandrel for cloth wheel, 1 mandrel for felt wheels, 5 fiberglass cut of wheels, 1 flap wheel and 1 wet stone.
- Case comes with a clear, latching front and a carry handle.
- This exceptional value gives a wide variety of options for cutting, polishing, drilling, sanding, buffing, and grinding.
- All the manual accessories included are compartmentalized for secure holding in the case.
25 Comments
Your comment cannot be blank.
Featured Comments
Sign up for a Slickdeals account to remove this ad.
I second this. I got this yesterday. Was cutting off the wire shelves (everbilt ones from Home Depot) to length. Had last dremel cut of wheel that did one shelf like a hot knife thru a butter. Next up was this hyper tough reinforced cut of wheels. I'd say they are like a room temperature knife thru a frozen butter block. 50% more time.. if not worse. Works tho. Just gotta be patient.
These were probably made in 1986. Lol.
While I don't care for newer Dremels, their accessories are still FAR better, and cost effective, when compared to this junk. Especially when you consider that you'll likely only use 10-20% of the items that come with it.
Right off the bat, you can toss out the polish/pads l, grinding stones, cutoffs, and sanding sleeves. Because all of those will fall apart in a matter of seconds.
Now look at everything else in the kit.... will you use those?
Put this $10 towards good accessories from Dremel. They'll do much more for you in your RTX, Milwaukee 12v, or Bosch 12v rotary tools. If you don't have one of those 3, then you deserve this $9 kit! Lmao 🤣 😜 😜 jk. I learned the hard way myself.
wow
Not just tough
Not just super tough
but HYPER tough
If your referring to the 1/8" mandrel with the screw through the end then yes this has one
Yeah I purchased 4 of them when they were $6 also! I still have 2 kits left from last year so I am good for a few years! I don't use my corded Dremel or M12 Milwaukee Rotary tool as much as I used to because of patience. I will typically use one of my angle Grinders or even Die Grinders with a cut off wheel and I have a old bench grinder I converted into a metal polisher.
Some have mentioned the accessories as crap but I haven't used them enough to comment. One thing though is whenever I am cutting metal I used to use just safety glasses (not goggles) but now use the safety glasses under a full face shield.
Sign up for a Slickdeals account to remove this ad.
3D Print Molds and put them in a Milwaukee deep clear packout storage case. Insanely clean and will give you pride opening it if you're really obsessed about being clean like me
For this...the time it would take to model everything I want is nowhere near the value that this $10 case gives. I just got mine two days ago and I'll likely go through my bits and trash the questionable ones; same with the included bits in this pack. The box is large enough to easy carry and store on my workbench or in one of the workbench drawers, unlike a full size Packout. Not to mention being $50-100 cheaper.