popular Posted by Darkwinter • Oct 23, 2022
Oct 23, 2022 6:50 PM
Item 1 of 8
Item 1 of 8
popular Posted by Darkwinter • Oct 23, 2022
Oct 23, 2022 6:50 PM
RIDGID 10 in. Table Saw with Folding Stand R4550 - The Home Depot $379, YMMV B&M
$379
$549
30% offHome Depot
Get Deal at Home DepotGood Deal
Bad Deal
Save
Share
32 Comments
Sign up for a Slickdeals account to remove this ad.
blade left centered vs center
32inch vs 30inch
Aluminum vs Plastic
5 years vs SLA
blade left centered vs center
32inch vs 30inch
Aluminum vs Plastic
5 years vs SLA
549 -> 379
Rip cap increases to 32 from 30.
got it from Tigard branch in Oregon (97224)
i wanted to add my receipt but in the app I couldn't.
Sale YMMV.
https://www.homedepot.c
But if you want to add an image yourself, you can either go to the desktop version of your thread on your phone and add it from there. Or if you can't do that, you're welcome to email the image of your receipt to me (to my username, widgit, @ slickdeals.net) and I can add it for you if wish. If you choose to email it to me, then please quote/reply to me here and tell me that you've done so, so that I know to check my work email
Biggest downside is that making a zero clearance insert was a chore but I learned a lot. I think it'll hold up well until I someday take the plunge into a hybrid table saw... If it use it enough!
Sign up for a Slickdeals account to remove this ad.
Biggest downside is that making a zero clearance insert was a chore but I learned a lot. I think it'll hold up well until I someday take the plunge into a hybrid table saw... If it use it enough!
I hate the blade change wrenches, so I bought a 21mm ratcheting wrench just to do blade changes to use on the outer nut while still using the skinny open end wrench. If you ever get into dado blades, skip the Mibro set. I got that cuz it was the cheapest and I figured that it'd be fine for a beginner like myself...they don't cut straight at all. Returned them and got the Oshlun set and I'm very happy with those.
I hate the blade change wrenches, so I bought a 21mm ratcheting wrench just to do blade changes to use on the outer nut while still using the skinny open end wrench. If you ever get into dado blades, skip the Mibro set. I got that cuz it was the cheapest and I figured that it'd be fine for a beginner like myself...they don't cut straight at all. Returned them and got the Oshlun set and I'm very happy with those.
Can you send a link to that wrench?
Can you send a link to that wrench?
Can you send a link to that wrench?
But if you want to add an image yourself, you can either go to the desktop version of your thread on your phone and add it from there. Or if you can't do that, you're welcome to email the image of your receipt to me (to my username, widgit, @ slickdeals.net) and I can add it for you if wish. If you choose to email it to me, then please quote/reply to me here and tell me that you've done so, so that I know to check my work email
Biggest downside is that making a zero clearance insert was a chore but I learned a lot. I think it'll hold up well until I someday take the plunge into a hybrid table saw... If it use it enough!
Sign up for a Slickdeals account to remove this ad.