expired
Pittsburgh Snap Ring Pliers with Interchangeable Heads $3
$3.00
Harbor Freight
This Deal Has Expired We can notify you when similar deals are posted. Set up Deal Alert
Harbor FreightDeal Details
Harbor Freight has an online/in-store coupon for snap ring pliers. Coupon #95715473 95715473 good through 01/22/2023.
https://www.harborfreig
1-star Review by "BrokenTools":
I agree with the one-star reviews. This tool is flimsy crap. It is but a humble hand tool. This humble $5 hand tool can be fixed and be made more worthy. All it takes is an additional 3/4" #10 machine screw, and a nut. Take it apart, as if you were going to replace the head with one of the auxiliaries (the extra, or spare). Replace the center pin with a nut and bolt. You need a #10 machine screw, at least 3/4 of an inch length. I re-used the spring, but it could be optional. Another improvement might be a rubber washer on the backside with the nut. Tighten appropriately, but not too tight. The spring-loaded quick-change pin is useless, pointless, worthless. Trash it. This fancy piece of crap is the weakest point of the tool. Tools should be functional, not fancy. It deserves 3 or 4 stars. But I thought I'd throw the DIY upgrade/repair instructions down in the 1-star section for cynical people like me who have their doubts and check the 1-star reviews first. My first HF review. Thanks for reading.
https://www.harborfreig
1-star Review by "BrokenTools":
I agree with the one-star reviews. This tool is flimsy crap. It is but a humble hand tool. This humble $5 hand tool can be fixed and be made more worthy. All it takes is an additional 3/4" #10 machine screw, and a nut. Take it apart, as if you were going to replace the head with one of the auxiliaries (the extra, or spare). Replace the center pin with a nut and bolt. You need a #10 machine screw, at least 3/4 of an inch length. I re-used the spring, but it could be optional. Another improvement might be a rubber washer on the backside with the nut. Tighten appropriately, but not too tight. The spring-loaded quick-change pin is useless, pointless, worthless. Trash it. This fancy piece of crap is the weakest point of the tool. Tools should be functional, not fancy. It deserves 3 or 4 stars. But I thought I'd throw the DIY upgrade/repair instructions down in the 1-star section for cynical people like me who have their doubts and check the 1-star reviews first. My first HF review. Thanks for reading.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Harbor Freight has an online/in-store coupon for snap ring pliers. Coupon #95715473 95715473 good through 01/22/2023.
https://www.harborfreig
1-star Review by "BrokenTools":
I agree with the one-star reviews. This tool is flimsy crap. It is but a humble hand tool. This humble $5 hand tool can be fixed and be made more worthy. All it takes is an additional 3/4" #10 machine screw, and a nut. Take it apart, as if you were going to replace the head with one of the auxiliaries (the extra, or spare). Replace the center pin with a nut and bolt. You need a #10 machine screw, at least 3/4 of an inch length. I re-used the spring, but it could be optional. Another improvement might be a rubber washer on the backside with the nut. Tighten appropriately, but not too tight. The spring-loaded quick-change pin is useless, pointless, worthless. Trash it. This fancy piece of crap is the weakest point of the tool. Tools should be functional, not fancy. It deserves 3 or 4 stars. But I thought I'd throw the DIY upgrade/repair instructions down in the 1-star section for cynical people like me who have their doubts and check the 1-star reviews first. My first HF review. Thanks for reading.
https://www.harborfreig
1-star Review by "BrokenTools":
I agree with the one-star reviews. This tool is flimsy crap. It is but a humble hand tool. This humble $5 hand tool can be fixed and be made more worthy. All it takes is an additional 3/4" #10 machine screw, and a nut. Take it apart, as if you were going to replace the head with one of the auxiliaries (the extra, or spare). Replace the center pin with a nut and bolt. You need a #10 machine screw, at least 3/4 of an inch length. I re-used the spring, but it could be optional. Another improvement might be a rubber washer on the backside with the nut. Tighten appropriately, but not too tight. The spring-loaded quick-change pin is useless, pointless, worthless. Trash it. This fancy piece of crap is the weakest point of the tool. Tools should be functional, not fancy. It deserves 3 or 4 stars. But I thought I'd throw the DIY upgrade/repair instructions down in the 1-star section for cynical people like me who have their doubts and check the 1-star reviews first. My first HF review. Thanks for reading.
Community Voting
Deal
Score
-1
Good Deal
Bad Deal
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
5 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
Our community has rated this post as helpful. If you agree, why not thank
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!