Amazon Basics 100W GaN Wall Charger w/ 2 USB-C + 2 USB-A Ports Expired

Although he is wrong about the AmazonBasics not being able to give 100W to a single port -- the description explicitly says it can. Having said that, 100W USB-C chargers in the $30 range are a dime a dozen. I also have these two:

https://www.amazon.com/dp/B0BFRJHKWJ/ (Geekera, $32, has permanently attached AC Cord)

https://www.amazon.com/dp/B07THC5DJV/ (KeyPower, $38, has replaceable AC cord, most flexible charging port power allocation)

both of which work fine. The KeyPower is more flexable about allocating power (both C-ports are up to 100W), and its logic for reallocating power is better (it only does it if you plug in a second device, the geekera does it EVERY time even a single device in ... both briefly disconnect the charging device during the allocation process), but the geekera has more USB-C ports, which is why I got it. Both of those also have AC cords and don't directly hang off the outlet, which is a bonus in my book.

The Amazon one has the benefit of saying 'Amazon' on the side, which means it's probably not going to melt, but I haven't had trouble with my chinagarbage ones (yet). Other than that it's the worst -- only one port supports 100W (same as Geekera), but NONE of the USB-A ports support QC (ALL of the other adapters I've linked can do QC on the USB A ports). If two C ports is enough and you like the AC cord, I'd go with the Keypower. I've had mine for years, bought a second one, and never had any problems with it. I like that I don't need to pay attention to which C port I plug my laptop into, which is the main reason I'd recommend it.

In the next step up (150W), I also have one of these: https://www.amazon.com/dp/B08RXX1B3H, which is nice because it can charge a laptop (PD) and phone (PPS) at the same time with no reduction in power allocation to either. 150W chargers are also becoming pretty common, so shop around. Pay attention to the capabilities of the individual ports. MANY of the cheap high-wattage chargers can't do the power allocation trick and allocate fixed amounts to each port (eg, 50Wx4=200W), which is a hard no for me.

Did you read it? It says USB-C Port1 can do 65-100 watts, assuming no other ports are in use.

No 12V output, sadly. I have some specific devices that I've modded to work with 12V. Otherwise a great deal for one high-power port and three low-power convenience ports.