expiredminntwins | Staff posted Jul 07, 2023 12:21 PM
Item 1 of 5
Item 1 of 5
expiredminntwins | Staff posted Jul 07, 2023 12:21 PM
Prime Members: 2-Pack KMC 4-Outlet WiFi Smart Plugs w/ Energy Monitoring
+ Free Shipping$14
$20
30% offAmazon
Visit AmazonGood Deal
Bad Deal
Save
Share
Leave a Comment
Top Comments
You need to compile your own build of Tasmota to enable the PING command, but I had it so it would ping Google every 5 minutes to determine whether I had internet or not. If it was down, it would cycle the outlet the modem was connected to.
The scripting language in Tasmota is robust enough that I was able to have it add time between flipping the power if it had consecutive unsuccessful ping/flip sequences, thus putting less strain on the relay.
The only downside (possible upside if you like auditory queues) is that the relays are pretty loud. They definitely won't work well in any quiet setting.
110 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank trza
Edit: $9.50 for two December 2021
But they are nifty to add your lights to a timer and/or control the lights from an app.
Our community has rated this post as helpful. If you agree, why not thank trza
If you integrate it with Home Assistant you could do your logic there pretty easily once you define your sensor(s).
I think these work with Tuya app. Might be another option there.
Our community has rated this post as helpful. If you agree, why not thank gtfours
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank aqan
The hot end also turns off and on to maintain temp so it may cause problems if you try this while printing.
I have my printer connected to a Kasa plugin. It turns on when I upload a file to octoprint and it turns off after it has been idle for 30 minutes.
Sign up for a Slickdeals account to remove this ad.
Leave a Comment