This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
The dell inspiron line is dell's cheapest, lowest quality they sell. They cannot build stuff with less quality than inspiron, and still make $. This isn't an investment. It barely qualifies as reliable transportation.
why? you can replace with something larger, or add a secondary drive, mechanical or ssd.
would you prefer a slower machine with larger disk at this price?
Our community has rated this post as helpful. If you agree, why not thank The_Love_Spud
This isn't exactly a killer deal, but is otherwise a solid desktop PC. However, the primary trade-off is the incorporation of relatively custom components in the form of an OEM motherboard and power supply.
This power supply is a 12 Volt Only style model. That style distinction is significant since although OEMs have started implementing their own versions of ATX 12VO for cost-savings as well as to meet certain efficiency requirements, what is being sold in OEM systems isn't really standardized in the retail space. So if the power supply needs replacement (outside of warranty) or upgrading, this challenge alone will create some issues well beyond a simple drive to Micro Center.
On top of that, the motherboard also integrates the front panel connections such as the USB sockets directly onto the motherboard. Though typical for many OEM systems such as those from HP, this also complicates replacement of the motherboard and/or case.
As such, this recommends at least three possible approaches:
Operate this system as a sealed box with limited to power-neutral upgrades for its lifetime (so only swapping in CPUs or GPUs which are supported within the existing power budget). This works for a large group of users and represents the target audience of this kind of pre-built.
Be the kind of DIY-er who cuts into power supply wires, uses custom power supply wire harnesses, or runs dual power supplies in a PC as part of their GPU upgrade (nothing unimaginable, but definitely a niche group).
Ignore this kind of highly custom OEM system in favor of a PC which utilizes standardized motherboards and power supplies.
This isn't exactly a killer deal, but is otherwise a solid desktop PC. However, the primary trade-off is the incorporation of relatively custom components in the form of an OEM motherboard and power supply.
This power supply is a 12 Volt Only style model. That style distinction is significant since although OEMs have started implementing their own versions of ATX 12VO for cost-savings as well as to meet certain efficiency requirements, what is being sold in OEM systems isn't really standardized in the retail space. So if the power supply needs replacement (outside of warranty) or upgrading, this challenge alone will create some issues well beyond a simple drive to Micro Center.
On top of that, the motherboard also integrates the front panel connections such as the USB sockets directly onto the motherboard. Though typical for many OEM systems such as those from HP, this also complicates replacement of the motherboard and/or case.
As such, this recommends at least three possible approaches:
Operate this system as a sealed box with limited to power-neutral upgrades for its lifetime (so only swapping in CPUs or GPUs which are supported within the existing power budget). This works for a large group of users and represents the target audience of this kind of pre-built.
Be the kind of DIY-er who cuts into power supply wires, uses custom power supply wire harnesses, or runs dual power supplies in a PC as part of their GPU upgrade (nothing unimaginable, but definitely a niche group).
Ignore this kind of highly custom OEM system in favor of a PC which utilizes standardized motherboards and power supplies.
why? you can replace with something larger, or add a secondary drive, mechanical or ssd.
would you prefer a slower machine with larger disk at this price?
I actually agree with them. $650-$700 is not very compelling for this config.
13 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank JimR2075
Items (1)
$919.99
Savings
- $270.00
Delivery
FREE
edit : Also note that this config only has a 180W PSU. not enough to support adding a video card if that matters to folks
"The maximum resolution supported over HDMI is 1920x1080 @ 60Hz. No 4K2K output."
would you prefer a slower machine with larger disk at this price?
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank The_Love_Spud
This power supply is a 12 Volt Only style model. That style distinction is significant since although OEMs have started implementing their own versions of ATX 12VO for cost-savings as well as to meet certain efficiency requirements, what is being sold in OEM systems isn't really standardized in the retail space. So if the power supply needs replacement (outside of warranty) or upgrading, this challenge alone will create some issues well beyond a simple drive to Micro Center.
On top of that, the motherboard also integrates the front panel connections such as the USB sockets directly onto the motherboard. Though typical for many OEM systems such as those from HP, this also complicates replacement of the motherboard and/or case.
As such, this recommends at least three possible approaches:
- Operate this system as a sealed box with limited to power-neutral upgrades for its lifetime (so only swapping in CPUs or GPUs which are supported within the existing power budget). This works for a large group of users and represents the target audience of this kind of pre-built.
- Be the kind of DIY-er who cuts into power supply wires, uses custom power supply wire harnesses, or runs dual power supplies in a PC as part of their GPU upgrade (nothing unimaginable, but definitely a niche group).
- Ignore this kind of highly custom OEM system in favor of a PC which utilizes standardized motherboards and power supplies.
Good luck!Jon
I wouldn't buy it unless I had 200 off/cashback from AMEX or something.
This power supply is a 12 Volt Only style model. That style distinction is significant since although OEMs have started implementing their own versions of ATX 12VO for cost-savings as well as to meet certain efficiency requirements, what is being sold in OEM systems isn't really standardized in the retail space. So if the power supply needs replacement (outside of warranty) or upgrading, this challenge alone will create some issues well beyond a simple drive to Micro Center.
On top of that, the motherboard also integrates the front panel connections such as the USB sockets directly onto the motherboard. Though typical for many OEM systems such as those from HP, this also complicates replacement of the motherboard and/or case.
As such, this recommends at least three possible approaches:
- Operate this system as a sealed box with limited to power-neutral upgrades for its lifetime (so only swapping in CPUs or GPUs which are supported within the existing power budget). This works for a large group of users and represents the target audience of this kind of pre-built.
- Be the kind of DIY-er who cuts into power supply wires, uses custom power supply wire harnesses, or runs dual power supplies in a PC as part of their GPU upgrade (nothing unimaginable, but definitely a niche group).
- Ignore this kind of highly custom OEM system in favor of a PC which utilizes standardized motherboards and power supplies.
Good luck!Jon
would you prefer a slower machine with larger disk at this price?