Meross Ecommerce via Amazon has
Refoss Smart Home WiFi Energy Monitor System w/ 16x 60A Circuit Sensors (EM16) on sale for
$169.99 when you clip the $30 Off coupon on the page.
Shipping is free.
Thanks to Community Member
QueeYina for sharing this deal.
- Note: Must be logged in to clip coupons; coupons are typically one-time use. Product will be sold by Meross Ecommerce and fulfilled by Amazon
About this Item:
- Supports 2 main circuit sensors (up to 200A each) and 16 branch circuit sensors (up to 60A each) with easy-to-install clamp-on design. Compatible with single-phase 2-wire systems, single-split phase 3-wire systems, and 3-phase 4-wire Wye systems with earthed (TN or TT) neutral (no Delta). Easily installs in most home circuit panels.
- Keep track of your home's electricity usage anytime, anywhere with the Refoss app. Easily monitor power, current, voltage, and power factor for major appliances like air conditioners, furnaces, and water heaters. Track real-time electricity usage data to see what's running and identify what's consuming power.
- Identify energy-hungry appliances, and set usage goal for each circuit. You'll receive alerts for unusual energy spikes, and take proactive steps to lower your electricity bills and save more energy.
- The Refoss energy monitor offers 98% accuracy and can store up to 36 months of data. Easily access detailed electricity usage and cost graphs by minute, hour, day, month, or year, giving you deep insights into your energy consumption and empowering you to make smarter energy decisions.
- Specs:
- Power Supply: 100-240V~, 50/60Hz
- Supported System:
- Single-phase, 2-wire systems
- Split-phase, 3-wire systems
- Three-phase, 4-wire Wye systems with earthed (TN or TT) neutral (no-Delta)
- Voltage-current Correspondence:
- Red -> A1~ A6, Power
- Green -> B1~ B6
- Black -> C1~ C6
- Main Current Transformers:
- Max Primary Current: 200A
- Max Voltage: 250V (Primary) / 333mV (Secondary)
- Burden Resistor: 7.2ohm, 1%, 62.5mW
- Cable Length: 1m
- Inside Diameter: 24mm
- Branch Current Transformers:
- Max Primary Current: 60A
- Max Voltage: 250V (Primary) / 333mV (Secondary)
- Burden Resistor: 18.2ohm, 1%, 62.5mW
- Cable Length: 1m
- Inside Diameter: 10mm
Leave a Comment
Top Comments
109 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank JoshS5261
$200 is where the more reviewed brands sit.
At $150 I'd take the gamble with a no name personally.
This is just a bunch of clamp meters, if you want to be really safe all you have to do is shut off the feed to your house before taking the panel cover off.
I'd just do it hot but I'm not scared of 480v either.
Our community has rated this post as helpful. If you agree, why not thank wherestheanykey
If your inspector doesn't understand this, you need a different inspector.
Our community has rated this post as helpful. If you agree, why not thank wherestheanykey
If you don't trust products that don't have a big box retail presence, you're only limiting yourself.
Sign up for a Slickdeals account to remove this ad.
A commenter has stated that this system does advertise power factoring.
(Originally I had coupled power factoring with True-RMS, which was a mistake as pointed out in the replies.)
Before you start doing anything inside your main panel TURN OFF the main breaker. I can go into more detail on the installation, but the most difficult part will be to install the double pole breaker to power the device. Rest of installation should be a breeze since they are non-contact.
Sign up for a Slickdeals account to remove this ad.
Leave a Comment