expired
Missed This Deal? Get alerts when similar deals are posted.
Deal Details
Ortur has the Laser Master 3 10W laser engraver on sale for $369.99 with code DL330 and the Laser Master 2 [ortur.net] (also 10W) for $269.99 with code DL80.
The 10W light output power is enough to cut all materials that diode lasers can cut, such as wood, cardboard, fabric, leather, opaque acrylic, etc.
The Laser Master 3 has seven safety features. For example, it will turn off the laser if it is tilted. However, in addition to wearing goggles, I would recommend building or buying an enclosure for the laser engraver. Also because there is a lot of smoke when cutting wood.
https://ortur.net/products/ortur-...mm-min-10w
The 10W light output power is enough to cut all materials that diode lasers can cut, such as wood, cardboard, fabric, leather, opaque acrylic, etc.
The Laser Master 3 has seven safety features. For example, it will turn off the laser if it is tilted. However, in addition to wearing goggles, I would recommend building or buying an enclosure for the laser engraver. Also because there is a lot of smoke when cutting wood.
- Laser Module: LU2-10A (10W)
- Speed: 20,000mm/min
- Size: 658*625*150mm
- Engraving Area: 400*400mm
- Output Power: 9.5-10.5W
- Laser Wavelength: 445+5nm
- Spot Size: 0.05*0.1mm
- Focal Distance: 50mm
- Service Life: >10,000h
- Safety Protections: 7
- Support Function: WiFi,App, USB, SD card
https://ortur.net/products/ortur-...mm-min-10w
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Ortur has the Laser Master 3 10W laser engraver on sale for $369.99 with code DL330 and the Laser Master 2 [ortur.net] (also 10W) for $269.99 with code DL80.
The 10W light output power is enough to cut all materials that diode lasers can cut, such as wood, cardboard, fabric, leather, opaque acrylic, etc.
The Laser Master 3 has seven safety features. For example, it will turn off the laser if it is tilted. However, in addition to wearing goggles, I would recommend building or buying an enclosure for the laser engraver. Also because there is a lot of smoke when cutting wood.
https://ortur.net/products/ortur-...mm-min-10w
The 10W light output power is enough to cut all materials that diode lasers can cut, such as wood, cardboard, fabric, leather, opaque acrylic, etc.
The Laser Master 3 has seven safety features. For example, it will turn off the laser if it is tilted. However, in addition to wearing goggles, I would recommend building or buying an enclosure for the laser engraver. Also because there is a lot of smoke when cutting wood.
- Laser Module: LU2-10A (10W)
- Speed: 20,000mm/min
- Size: 658*625*150mm
- Engraving Area: 400*400mm
- Output Power: 9.5-10.5W
- Laser Wavelength: 445+5nm
- Spot Size: 0.05*0.1mm
- Focal Distance: 50mm
- Service Life: >10,000h
- Safety Protections: 7
- Support Function: WiFi,App, USB, SD card
https://ortur.net/products/ortur-...mm-min-10w
Community Voting
Deal
Score
+2
Good Deal
Bad Deal
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
0 Comments
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!