polymaker has for
New Customers: 1kg polymaker Panchroma CoPE 1.75mm 3D Printer Filament (Various Colors) on sale for $11 - $1.65 with new customer discount code
POLYMAKERFIRSTTRY during checkout =
$9.35.
Shipping is free.
Thanks to Community Member
gabe23111 for sharing this deal.
- Note: Offer is valid only on a single spool.
About this Item:
- Panchroma Cope is a new experimental product that is not PLA - it is CoPE. It prints with very similar settings as PLA but can achieve better overhangs at faster speeds.
- That said - it does not stick to PLA very well and therefore should not be combined with other Panchroma PLA Products in a single print. It also sticks very well to textured PEI plates, therefore we only recommend using Panchroma CoPE with a textured PEI plate if used with Magigoo Original.
- Specs:
- Printing Temperature: 190ËšC - 230ËšC
- Bed Temperature: 25ËšC - 60ËšC
- Printing Speed: up to 400mm/s
- Fan: ON
- Direct Drive:
- Retraction Distance: 1mm
- Retraction Speed: 20mm/s
- Indirect Drive:
- Retraction Distance: 3mm
- Retraction Speed: 40mm/s
- Drying Settings: 55ËšC for 6h
Top Comments
https://cdn.shopify.com/s/files/1...1731608271
Pretty vague--"ensure adequate ventilation", and "use personal protective equipment" and "evacuate personnel to safe areas"
And all the Toxicological information is "not available" or "not classified".
Not enough information there to even hazard a guess...so it's a hard "no" for me.
That's rough...
121 Comments
Sign up for a Slickdeals account to remove this ad.
This was asked on Facebook post and no one had used it there either
Our community has rated this post as helpful. If you agree, why not thank namsupak
Sign up for a Slickdeals account to remove this ad.
Would a Bambu labs cool plate or engineering plate work?
Bambu also makes a smooth plate.
That's rough...