frontpage Posted by minntwins | Staff • Mar 7, 2025
Mar 7, 2025 12:09 PM
Item 1 of 4
Item 1 of 4
frontpage Posted by minntwins | Staff • Mar 7, 2025
Mar 7, 2025 12:09 PM
2-Pack Worx WX065 Clamping Sawhorses w/ Bar Clamps
+ Free Shipping$59
$85
30% offAmazon
Get Deal at AmazonGood Deal
Bad Deal
Save
Share
Top Comments
https://www.harborfreig
17 Comments
Sign up for a Slickdeals account to remove this ad.
[LIGHTWEIGHT & EASY TO MOVE] At only 4 lbs. each, you can toss them into the back of a vehicle or store them in the corner in-between projects
[SUPPORTS 1000 LBS] And the clamps provide up to 300 lbs. of pressure. Hold heavy projects securely in place for as long as you need
[STORAGE SHELF] On the bottom of these sawhorses we've made a place to hold a power strip or supplies. Give your workspace an extra shelf or more storage
[DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that's been designed to last
[AFFORDABLE] The clamps act like a second pair of very strong hands, so you can work on large projects all by yourself
[USEFUL CLAMPS] The bar clamps detach, so if you have a project on another workspace, you can take that 300 lbs. of pressure wherever it's needed. each clamp utilizes up to 300 lbs. of clamping force to assist with any job
[ABS & STEEL] The sawhorses themselves are made from rugged, molded ABS, and the clamps are ABS and steel. That's why they can support and squeeze so much
https://www.amazon.com/dp/B00XPKS6Q2
Bought the work table from Best Buy when they were listed on SD about a month ago. Haven't used them yet but they seem good. Any idea how to mount them to a garage wall when not in use?
Sign up for a Slickdeals account to remove this ad.
https://www.menards.com/main/tool...?exp=fal
https://www.harborfreig
Edit: looks like you asked the same question on the Pegasus deal thread. Ok, if you are working with the Fastrack system, you can simply continue using two hooks you currently have - space them about 2 ft apart, and with one side of the bungee hook, hook it onto the FastTrack hook, loop it around and below the pegasus table (inside and inbetween the legs) and loop it up to hook the other end of the hook onto the cord itself. This, along with the weight of the table will cinch up the cord and get tighter. You will need a decent medium strength bungee so that the table doesnt touch the floor.
Edit: looks like you asked the same question on the Pegasus deal thread. Ok, if you are working with the Fastrack system, you can simply continue using two hooks you currently have - space them about 2 ft apart, and with one side of the bungee hook, hook it onto the FastTrack hook, loop it around and below the pegasus table (inside and inbetween the legs) and loop it up to hook the other end of the hook onto the cord itself. This, along with the weight of the table will cinch up the cord and get tighter. You will need a decent medium strength bungee so that the table doesnt touch the floor.
https://www.harborfreig
I picked up 2 when they first went on sale and I already use them more than my fancier more expensive metal ones just because of how lightweight and convenient they are.
Sign up for a Slickdeals account to remove this ad.