1x USB-C 3.2 Gen 2 10 Gbps (Video Input, 140W USB PD Out, DisplayPort 1.4 In)
2x USB-C 3.2 Gen 2 10 Gbps (15W Charging)
3x USB-A 3.2 Gen 1 Type-A (3 Charging with 7.5W)
1x DisplayPort 2.1
2x HDMI 2.1
1x 3.5mm Audio Out
Community Notes
This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
Can you explain the audio part a bit more does it affect audio directly from the PC or only if using the audio port on the monitor?
The HP Omen Transcend 32 QD-OLED causes audio distortion even if you're not using the monitor's built-in HyperX speakers. The issue stems from poor firmware-level signal handling and how the monitor interacts with the GPU and system interrupts, especially on high-performance setups (e.g. RTX 4090/5090, high-end CPUs, USB DACs).
I experienced micro-tears, pops, and audio glitches across multiple DACs and speakers, including Schiit Bifrost 2 and JBL externals. The distortion only occurred when this monitor was connected — even if all audio was routed elsewhere. Once I swapped to a different display (LG 5K2K IPS), the issues disappeared.
What's happening is likely related to:
Poor DPC latency behavior triggered by the monitor's constant polling/handshaking
Conflicts between HDR support, VRR modes, and USB audio devices
Lack of firmware updates to correct these problems
So yes, it affects audio directly from the PC, not just audio passed through the monitor.
If you're running a simple setup, you might not notice it. But if you're an audiophile or using sensitive DACs, it can absolutely degrade your signal chain. Hope that helps!
Gear I used to test the chain: Bifrost 2, Valhalla 2 with Philips (SQ) matched tubes, Jotenheim amp only, and bifrost 2. Headphones: HD 800S and HifiMan Arya.
Was thinking of getting a mac book pro or mac mini simply for analyttical listening sesh. In Windows 11 ive expereince it to be common to have audio issues after any major updates.
The HP Omen Transcend 32 QD-OLED causes audio distortion even if you're not using the monitor's built-in HyperX speakers. The issue stems from poor firmware-level signal handling and how the monitor interacts with the GPU and system interrupts, especially on high-performance setups (e.g. RTX 4090/5090, high-end CPUs, USB DACs).I experienced micro-tears, pops, and audio glitches across multiple DACs and speakers, including Schiit Bifrost 2 and JBL externals. The distortion only occurred when this monitor was connected — even if all audio was routed elsewhere. Once I swapped to a different display (LG 5K2K IPS), the issues disappeared.What's happening is likely related tooor DPC latency behavior triggered by the monitor's constant polling/handshakingConflicts between HDR support, VRR modes, and USB audio devicesLack of firmware updates to correct these problemsSo yes, it affects audio directly from the PC, not just audio passed through the monitor.If you're running a simple setup, you might not notice it. But if you're an audiophile or using sensitive DACs, it can absolutely degrade your signal chain. Hope that helps!Gear I used to test the chain: Bifrost 2, Valhalla 2 with Philips (SQ) matched tubes, Jotenheim amp only, and bifrost 2. Headphones: HD 800S and HifiMan Arya.
Thanks for your input... I use a headphone dac and I'm sure I'd be able to hear this noise.
Just finished 12-14 hours of troubleshooting over the course of two days. I was able to update the firmware using usb-c to usb-c with my Windows 11 laptop with igpu processor AMD 7840U. HDMI 2.1 is running clean audio, did full on ssd reformat and fresh windows 11 install, disabled audio pass through via hdmi in nvidia settings, i prob did over 50x micro toggles throughout the entire process. The firmware update I think really made a difference.
This screen actually gets to too bright for me and if youre in HDR you cannot lower the brightness without gimmicky tricks. The picture quality is the same panel as all the other brands and its beautiful.
Running RTX 5090 / 7800X3D on this finally stable with my Schiit Stack.
Also fun fact: I was able to enter manufactuer factory reset during my sequence of troubleshooting which is beyond the typical consumer factory reset option. Its not a perma option i was just able to luckily get in there with all my testing without even really trying. It's gone now.
If you want plug n play and reliability this isnt it. For the tech savvy trying to save on a great monitor, perhaps. Third party reseller would make RMA difficult and I was seriously considering RMAing my monitor but glad I fixed it. Def. not user friendly.
we need 4000+ nits the G5 OLED LG is going to be around 4k nits
I've read 4 hand-on reviews and while they say it's super bright, no one (not even LG's site) shows a brightness spec.
Also it's $3500 and also, it's a TV, not a PC monitor.
I've read 4 hand-on reviews and while they say it's super bright, no one (not even LG's site) shows a brightness spec.
Also it's $3500 and also, it's a TV, not a PC monitor.
professional calibrator on youtube measured it
would be good for retro gaming and using a tink 4k
not a computer/desktop use which i would agree , however if one had a controller using a front end like launchbox or steam you could enjoy controller based games like Rocket league.
even on my C1 65" rocket league plays better than every console version on game mode
Mine arrived today, clearly an open box item (box tape had been previously cut open), box also shows damage where the screen is packed. (Box was packed within a larger shipping box.) Disappointing, but will set up / test next week then decide between this and the AW2725Q...
22 Comments
Sign up for a Slickdeals account to remove this ad.
I experienced micro-tears, pops, and audio glitches across multiple DACs and speakers, including Schiit Bifrost 2 and JBL externals. The distortion only occurred when this monitor was connected — even if all audio was routed elsewhere. Once I swapped to a different display (LG 5K2K IPS), the issues disappeared.
What's happening is likely related to:
Poor DPC latency behavior triggered by the monitor's constant polling/handshaking
Conflicts between HDR support, VRR modes, and USB audio devices
Lack of firmware updates to correct these problems
So yes, it affects audio directly from the PC, not just audio passed through the monitor.
If you're running a simple setup, you might not notice it. But if you're an audiophile or using sensitive DACs, it can absolutely degrade your signal chain. Hope that helps!
Gear I used to test the chain: Bifrost 2, Valhalla 2 with Philips (SQ) matched tubes, Jotenheim amp only, and bifrost 2. Headphones: HD 800S and HifiMan Arya.
This screen actually gets to too bright for me and if youre in HDR you cannot lower the brightness without gimmicky tricks. The picture quality is the same panel as all the other brands and its beautiful.
Running RTX 5090 / 7800X3D on this finally stable with my Schiit Stack.
Also fun fact: I was able to enter manufactuer factory reset during my sequence of troubleshooting which is beyond the typical consumer factory reset option. Its not a perma option i was just able to luckily get in there with all my testing without even really trying. It's gone now.
If you want plug n play and reliability this isnt it. For the tech savvy trying to save on a great monitor, perhaps. Third party reseller would make RMA difficult and I was seriously considering RMAing my monitor but glad I fixed it. Def. not user friendly.
Also it's $3500 and also, it's a TV, not a PC monitor.
Also it's $3500 and also, it's a TV, not a PC monitor.
would be good for retro gaming and using a tink 4k
not a computer/desktop use which i would agree , however if one had a controller using a front end like launchbox or steam you could enjoy controller based games like Rocket league.
even on my C1 65" rocket league plays better than every console version on game mode