15% off with code: THINGSYOULOVE
Description
Creality PLA Filament with nice and glossy color brings your prints a rich and shiny silk smooth appearance, which is quite suitable for printing docorations or structurers with luxurious fee.
Feature:
1.Less-tangle and Easy to Use:
Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother.
2.Dimensional Accuracy & Consistency:
Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, dimensional accuracy + / - .03 mm; 1 kg spool (2.2lbs).
3.High Compatibility &100% Environmental Material:
Compatible with 99% DIY & FFF 3D printers (with heated beds) and 3D pen. Environmental protection, our PLA filament is made from starch raw materials derived from renewable plant resources. Our PLA filament are fully dried for 24 hours before packing, then vacuum sealed in PC bags with desiccant.
Specifications:
Product Name：Soleyin Ultra PLA
Tensile strength (X-Y)：45.482 Mpa
Recommend Hotbed Temperature：45-60°C
Certification：ROHS,REACH,MSDS
Product Gross Weight：1.29Kg/2.8lb
Flexural strength (X-Y):70.696 MPa
Recommend Priting Temperature：190-230°C
Density：1.25g/cm3
Elongation at break (X-Y)：12.897%
Recommend Print Speed：30-300 mm/s
Filament Diameter：1.75mm
Packing Size：210*210*70mm
Product Net Weight：1Kg/2.2lb
Recommend Fan Speed：100%
Recommend Print Surface：carbon crystalline silicon, PEI platform board
THINGSYOULOVE
https://www.ebay.com/itm/374916031827
QA note: price varies by item
Leave a Comment
3 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank Koskun
The stuff is very picky, and that is putting it mildly. Odds are in order to get even an ok print you will have to dry it first. It has adhesion issues, extrusion issues, stringing, rough texture... It really is just a bad filament to get.
After having tried Sunlu, Soleyin, Jayo, Kingroon, Bambu, Elegoo, Polymaker, Inland, & maybe a few others brands I can say that Elegoo is my budget king, Bambu is great for the price, & Polymaker is great but usually expensive. ESPECIALLY for the AMS Lite. Elegoo Matte PLA, (r)PLA+, Galaxy, & rPETG all print great. Wait for an eBay 15-20% off promo & stack it with the 10 for 6 deal. It's not dirt cheap. But you'll get each roll for ~$10. The only issue is usually availability.
Leave a Comment