forum thread
Deal Details
Creality is offering the Hi Combo for $469 with code HISAVE60 and it includes two rolls of Hyper PLA RFID filament. The combo has the Hi printer plus the CFS multicolor filament system. The CFS is the same model that works with the K2 Plus or with a K1/K1C/K1 Max if upgraded, so you could also keep the CFS for another machine and sell the Hi if that made sense. The RFID filament is auto-recognized when loaded into the CFS, but any other filament works too.
The Hi has a slightly larger build volume, especially in the Z direction, than other entry level, multi color 3D printers, and it has an aluminum frame. It's mostly intended for beginners, easy to set up with auto calibration, but it's not fully enclosed, so it's suited for the most common basic materials, like PLA or PETG not so much for engineering grade filaments.
https://store.creality.
The Hi has a slightly larger build volume, especially in the Z direction, than other entry level, multi color 3D printers, and it has an aluminum frame. It's mostly intended for beginners, easy to set up with auto calibration, but it's not fully enclosed, so it's suited for the most common basic materials, like PLA or PETG not so much for engineering grade filaments.
- Build volume: 10.2 x 10.2 x 11.8 in (260 x 260 x 300 mm)
- Max speed: 500 mm/s
- Acceleration: up to 12000 mm/s²
- Frame: aluminum alloy
- Extruder: direct drive with steel gears
- Nozzle: tri-metal, 0.4 mm (0.6/0.8 mm optional) up 300°C
- Heated bed: 100°C two-sided epoxy flexible plate
- Motion: FOC step-servo motors, linear rail (X-axis), dual rods (Y-axis)
- Auto bed leveling with strain gauge probe
- Built-in filament cutter
- CFS: up to 4 filaments each, 16 max with 4 CFS, RFID recognition
- Integrated camera with privacy cap
- Dimensions: 16.1 x 15.4 x 18.8 in printer, 14.9 x 12.4 x 10.9 in CFS
https://store.creality.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Creality is offering the Hi Combo for $469 with code HISAVE60 and it includes two rolls of Hyper PLA RFID filament. The combo has the Hi printer plus the CFS multicolor filament system. The CFS is the same model that works with the K2 Plus or with a K1/K1C/K1 Max if upgraded, so you could also keep the CFS for another machine and sell the Hi if that made sense. The RFID filament is auto-recognized when loaded into the CFS, but any other filament works too.
The Hi has a slightly larger build volume, especially in the Z direction, than other entry level, multi color 3D printers, and it has an aluminum frame. It's mostly intended for beginners, easy to set up with auto calibration, but it's not fully enclosed, so it's suited for the most common basic materials, like PLA or PETG not so much for engineering grade filaments.
https://store.creality.
The Hi has a slightly larger build volume, especially in the Z direction, than other entry level, multi color 3D printers, and it has an aluminum frame. It's mostly intended for beginners, easy to set up with auto calibration, but it's not fully enclosed, so it's suited for the most common basic materials, like PLA or PETG not so much for engineering grade filaments.
- Build volume: 10.2 x 10.2 x 11.8 in (260 x 260 x 300 mm)
- Max speed: 500 mm/s
- Acceleration: up to 12000 mm/s²
- Frame: aluminum alloy
- Extruder: direct drive with steel gears
- Nozzle: tri-metal, 0.4 mm (0.6/0.8 mm optional) up 300°C
- Heated bed: 100°C two-sided epoxy flexible plate
- Motion: FOC step-servo motors, linear rail (X-axis), dual rods (Y-axis)
- Auto bed leveling with strain gauge probe
- Built-in filament cutter
- CFS: up to 4 filaments each, 16 max with 4 CFS, RFID recognition
- Integrated camera with privacy cap
- Dimensions: 16.1 x 15.4 x 18.8 in printer, 14.9 x 12.4 x 10.9 in CFS
https://store.creality.
Community Voting
Deal
Score
+6
Good Deal
Bad Deal
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
2 Comments
Sign up for a Slickdeals account to remove this ad.
https://www.bestbuy.com/site/crea...Id=66173
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!