Azocek via Amazon has
Azocek 220W/18V Battery Power Inverter Power Station w/ 400LM LED Work Light (Compatible with Milwaukee 18V, Red) on sale for
$29.31.
Shipping is free w/ Prime or on $35+ orders.
Thanks to Deal Hunter
phoinix for sharing this deal.
About the Product
- Batteries not included, Compatible with Milwaukee 18V
- 220W DC/AC Power Conversion
- 1x AC Outlet/2x 18W USB QC Ports/1x 30W PD Type-C
- 400LM LED Light (3-Level Adjustable Brightness)
- Protection Against Short Circuits, Overcurrent, Low Voltage, Overheating, Overload & Over Discharge
- Built-In Cooling Fan
Top Comments
Community Reviews
This Azocek inverter is a compact Milwaukee M18 battery adapter with one AC outlet, two 18 watt USB QC ports, one 30 watt USB C PD port, and a 400 lumen work light. Hands on testing confirms USB C PD works on a Pixel and the AC output can run around 100 watts, making it handy for small devices and quick charging. The main catch is that the title still says 18V, which is ambiguous, and the unit appears to drain batteries deeply without undervoltage protection. It looks best suited to light, short duration use with M18 packs.
Common Questions (4)
Yes. The listing is specifically for Milwaukee M18 batteries, and the title should say "for Milwaukee M18" because "18V" is ambiguous and can mislead shoppers with other incompatible 18V battery systems.
It has one AC outlet, two 18W USB QC ports, and one 30W USB-C PD Type-C port. That setup lets it charge multiple devices at once, and the USB-C PD port reportedly works with a Pixel.
It is rated at 220W, but real-world use appears limited to small loads: one report says it ran a device at about 100W, while heavier loads like water heaters or air conditioners would shut it down immediately. It is best suited for low-power items such as fans, LED strips, or phone charging.
Yes. One report says it drained a Milwaukee battery into deep sleep and required jump-starting with another M18 battery, so it may keep pulling power past a safe cutoff.
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
28 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
Sign up for a Slickdeals account to remove this ad.
Best case is use it for plug in LED light strips in the bathroom and take navy showers. You can usually get 4 days out of a hot water heater if you turn it on to get wet, and use lukewarm to rinse off. Get more if you wrap the hot water heater in a water heater insulation blanket and then put insulation on your pipes.
Not sure if you were joking or not, but just thought I'd suggest a couple things if you're worried.
Not even a second. Even if you connected just one of the 2 elements, you'll never get any heating out of these, it will shut down immediately. Can't even run an air conditioner on a 2000W without an additional hard start compressor.
Best case is use it for plug in LED light strips in the bathroom and take navy showers. You can usually get 4 days out of a hot water heater if you turn it on to get wet, and use lukewarm to rinse off. Get more if you wrap the hot water heater in a water heater insulation blanket and then put insulation on your pipes.
Not sure if you were joking or not, but just thought I'd suggest a couple things if you're worried.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!