expired
Creality Filament Dryer Box 2.0 w/ Fans
$28
$35
20% off
+ Free Shippingat eBay
Missed This Deal? Get alerts when similar deals are posted.
+ Free Shippingat eBayDeal Details
Creality-Official-Store via eBay has Creality Filament Dryer Box 2.0 w/ Fans for $34.62 - 20% w/ coupon code TOPGIFTPICKS = $27.70. Shipping is free.
Thanks to Community Member J3D123 for sharing this deal.
Features:
Thanks to Community Member J3D123 for sharing this deal.
Features:
- Creality Filament Dry Box 2.0 heats up quickly and has a built-in fan that circulates the hot air through 360° inside the chamber, evenly heating the entire chamber. It can be heated to 65°C within 15 minutes. We have added thermal insulation cotton on the dryer box inner wall to keep warm and anti-scald when printing. Dryer box input voltage: 110V 50/60Hz.
- You can set different drying temperatures and time to dry the filaments fully according to different 3D filament type, ambient temperature, humidity and other factors. Adjustable temperature range 45℃~65℃, and the time setting range is 0~24 hours.
- Creality filament dryer compatible with most 1KG spool 3D Printer filament. It can perfectly fit filament diameters of 1.75mm/2.85mm. And can be used with a variety of filaments, such as PLA, PLA+, PETG, TPU, ABS, ASA, PP, PC,PA(nylon). Pairing with Teflon tubes can make the filament feeding smoother.
Editor's Notes
Written by ValPal2011 | Staff- About this deal:
- Our research indicates that this offer is $14.29 lower (34% savings) than the next best available price from a reputable merchant with prices starting from $41.99.
- Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Creality-Official-Store via eBay has Creality Filament Dryer Box 2.0 w/ Fans for $34.62 - 20% w/ coupon code TOPGIFTPICKS = $27.70. Shipping is free.
Thanks to Community Member J3D123 for sharing this deal.
Features:
Thanks to Community Member J3D123 for sharing this deal.
Features:
- Creality Filament Dry Box 2.0 heats up quickly and has a built-in fan that circulates the hot air through 360° inside the chamber, evenly heating the entire chamber. It can be heated to 65°C within 15 minutes. We have added thermal insulation cotton on the dryer box inner wall to keep warm and anti-scald when printing. Dryer box input voltage: 110V 50/60Hz.
- You can set different drying temperatures and time to dry the filaments fully according to different 3D filament type, ambient temperature, humidity and other factors. Adjustable temperature range 45℃~65℃, and the time setting range is 0~24 hours.
- Creality filament dryer compatible with most 1KG spool 3D Printer filament. It can perfectly fit filament diameters of 1.75mm/2.85mm. And can be used with a variety of filaments, such as PLA, PLA+, PETG, TPU, ABS, ASA, PP, PC,PA(nylon). Pairing with Teflon tubes can make the filament feeding smoother.
Editor's Notes
Written by ValPal2011 | Staff- About this deal:
- Our research indicates that this offer is $14.29 lower (34% savings) than the next best available price from a reputable merchant with prices starting from $41.99.
- Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
Community Voting
Deal
Score
+26
Good Deal
Bad Deal
Top Comments
Community Reviews
This Creality filament dryer box is mainly a budget way to dry PLA, PETG, TPU, and ABS before printing, and it can also double as an external spool holder on a P1S. The drying function is useful for moisture prone PETG, stringing, blobs, and occasional bad batches, and it can help revive filament that has sat around. The box is not airtight and does cycle outside air, so it is meant for pre drying rather than long term storage. The main drawback is the single knob interface, which feels finicky and awkward. A basic but practical pick if you want drying without spending much more.
The dryer can help reduce PETG stringing and blob issues by drying moisture-prone filament before printing.
The unit can cycle external air, which supports drying rather than only heating trapped air.
The dryer can improve adhesion and stringing when filament is dried at the recommended time and temperature.
The box can be used as an external spool holder for TPU and ABS on a P1S, adding extra utility beyond drying.
The controls use a single-knob interface that can feel frustrating, finicky, and inconsistent across units.
The unit is not airtight, so it may not function like a fully sealed drying chamber for every setup.
The unit reportedly arrives sealed with no intentional venting outside, which may leave moisture inside the unit.
Drying effectiveness may be limited if the chamber only heats the same air without properly replacing saturated air.
Common Questions (5)
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
30 Comments
Sign up for a Slickdeals account to remove this ad.
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!