Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
Missed This Deal? Get alerts when similar deals are posted.
expired
expired
Cobalt_Blue_FF 5.2K Views
Dec 30, 2025 1:36 PM

SharkBite 1/2" x 1/2" Brass Crimp Ball Valve

$3.70-

$8.99

Amazon
Visit Amazon

Why are you downvoting this deal?

Good Deal?
18Comments
Save
Share
Deal Details
Amazon has SharkBite 1/2" Brass Crimp Ball Valve (22461LFA) for $3.68. Shipping is free w/ Prime or on $35+ orders.

Thanks to Community Member Cobalt_Blue_FF for finding this deal.

Available:Features:
  • No soldering or glue to create a watertight seal
  • SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination
  • Made of high-quality forged DZR brass that is lead-free
  • All SharkBite PEX tubing and silicone wrap meets the same standards for commercial and residential plumbing applications
  • Manufactured and tested in the USA

Editor's Notes

Written by powerfuldoppler | Staff
  • About this deal:
    • Our research indicates that this offer is $6.31 lower (63% savings) than the next best available price from a reputable merchant with prices starting from $9.99
  • About this store:

Original Post

Written by Cobalt_Blue_FF
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Amazon has SharkBite 1/2" Brass Crimp Ball Valve (22461LFA) for $3.68. Shipping is free w/ Prime or on $35+ orders.

Thanks to Community Member Cobalt_Blue_FF for finding this deal.

Available:Features:
  • No soldering or glue to create a watertight seal
  • SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination
  • Made of high-quality forged DZR brass that is lead-free
  • All SharkBite PEX tubing and silicone wrap meets the same standards for commercial and residential plumbing applications
  • Manufactured and tested in the USA

Editor's Notes

Written by powerfuldoppler | Staff
  • About this deal:
    • Our research indicates that this offer is $6.31 lower (63% savings) than the next best available price from a reputable merchant with prices starting from $9.99
  • About this store:

Original Post

Written by Cobalt_Blue_FF

Community Voting

Deal Score
+20
Good Deal
Bad Deal

Why are you downvoting this deal?

Visit Amazon

Top Comments

vid1900
3.5KComments
1.8KReputation
Don't forget that these are not regular sharkbite fittings that just push together.

You need a crimper and rings to install this valve.
Go to Comment

Community Reviews

This SharkBite brass crimp ball valve is a PEX shutoff valve that stands out for its DZR brass construction, which is valued for resisting dezincification in hard water. It is also useful for winterization or other lines that need to be fully drained, especially when a drain port or nipple matters. Installation is not push together, though, since it needs a crimp or cinch tool and rings. It is not for copper pipe or CPVC, which uses glue instead. A solid fit for PEX plumbing when the right crimping gear is already on hand.

  • The drain-port feature can be useful for specific winterization scenarios that require full emptying.

    tuphatMedic311

  • The valve uses DZR (dezincification-resistant) brass, which can help reduce zinc leaching in hard-water conditions.

    Medic311

  • The valve is designed for PEX pipe, which can fit common PEX supply line setups without mixing materials.

    griffijg99

  • The valve is for PEX pipe and may not be compatible with CPVC setups that use glue instead of clamp or cinch rings.

    griffijg99griffijg99glenatuf

  • The crimp-style installation requires a crimper and rings, so it is not a push-together valve.

    vid1900palindrome

  • A drain port is not needed in most applications, so paying for that feature may be unnecessary for under-sink or in-line uses.

    Medic311

Common Questions (5)

AI-generated summary based on comments from the community. Updated ago

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

18 Comments

Sign up for a Slickdeals account to remove this ad.

Dec 30, 2025 2:36 PM
325 Comments
Joined Sep 2017

This comment has been rated as unhelpful by Slickdeals users.

Dec 30, 2025 4:24 PM
699 Comments
Joined Dec 2014
FloridaKevinDec 30, 2025 4:24 PM
699 Comments
Quote from tuphat View quoted comment :
As a general rule, I would only use a shut-off valve that has a drain port/nipple, which allows full empty for purposes of winterization, etc.
I agree in most places, however here in Florida we don't need those much
1
Dec 30, 2025 6:21 PM
1.4K Comments
Joined Sep 2022
TealIdea227Dec 30, 2025 6:21 PM
1.4K Comments
Quote from tuphat View quoted comment :
As a general rule, I would only use a shut-off valve that has a drain port/nipple, which allows full empty for purposes of winterization, etc.
I recently learned while replacing my water heater (which has a single 3/4" valve on the cold side) that somewhere in my house, there is a cartridge backfeeding cold to hot. But I can't shut off any shower or tub to isolate it, and I can't replace a cartridge while the family is doing family things anyhow. I'd like 8 of these, but had been procrastinating putting together a $100 parts house order due to 2025 prices and suspicion of the ABCDEFG brand multi-packs on Amazon. So there's that.
1
Pro
Dec 30, 2025 7:29 PM
3.5K Comments
Joined Sep 2016
vid1900
Pro
Dec 30, 2025 7:29 PM
3.5K Comments

Our community has rated this post as helpful. If you agree, why not thank

Don't forget that these are not regular sharkbite fittings that just push together.

You need a crimper and rings to install this valve.
7
1
Dec 30, 2025 7:56 PM
786 Comments
Joined Mar 2006
griffijg99Dec 30, 2025 7:56 PM
786 Comments

Our community has rated this post as helpful. If you agree, why not thank

Quote from vid1900 View quoted comment :
Don't forget that these are not regular sharkbite fittings that just push together.You need a crimper and rings to install this valve.
Hopefully anybody who is buying this would realize it, but I figured I would add these are for PEX pipe, not copper pipe.
3
Dec 30, 2025 9:55 PM
436 Comments
Joined Sep 2009
palindromeDec 30, 2025 9:55 PM
436 Comments
Quote from griffijg99 View quoted comment :
Hopefully anybody who is buying this would realize it, but I figured I would add these are for PEX pipe, not copper pipe.
good to know. thanks. and I'm guessing you also need the crimping tool to use this.
Dec 30, 2025 10:09 PM
102 Comments
Joined Dec 2021
ThriftyFruit6271Dec 30, 2025 10:09 PM
102 Comments
Pretty good price, looking for copper shark bite

Sign up for a Slickdeals account to remove this ad.

Dec 30, 2025 10:29 PM
30.3K Comments
Joined Oct 2010
Medic311Dec 30, 2025 10:29 PM
30.3K Comments

Our community has rated this post as helpful. If you agree, why not thank

Quote from tuphat View quoted comment :
As a general rule, I would only use a shut-off valve that has a drain port/nipple, which allows full empty for purposes of winterization, etc.
not needed in most applications, so i wouldn't say it's a general rule...more like an exception for only specific use scenarios

we got ones with the drain port for shut offs that feed spigots, but for everything else (ie under sinks when using in-lines and not 1/2 x 3/8comp), lines that feed laundry connections, and others, you don't need the drain port.

unless this valve is feeding a fixture that gets winterized, saved yourself the money and get a non-port one
1
Dec 30, 2025 10:30 PM
30.3K Comments
Joined Oct 2010
Medic311Dec 30, 2025 10:30 PM
30.3K Comments
Quote from palindrome View quoted comment :
good to know. thanks. and I'm guessing you also need the crimping tool to use this.
crimp or cinch tool
Dec 30, 2025 10:35 PM
30.3K Comments
Joined Oct 2010
Medic311Dec 30, 2025 10:35 PM
30.3K Comments
note: that this IS made from DZR brass (Dezincification-Resistant brass)

this is a very good thing. there are a lot of cheap ball valves sold in stores and online which are not made out of DZR brass, and hard water will cause the zinc to leach out of the brass resulting in failure. i've had non-DZR brass valves start pitting and failing in as little as 5 yrs on water supply lines with hard water
Dec 30, 2025 10:48 PM
465 Comments
Joined Dec 2005
FishXDec 30, 2025 10:48 PM
465 Comments
You will need a crimping tool for this valve: Example [amazon.com]
Dec 30, 2025 10:52 PM
36 Comments
Joined Sep 2011
zaairioDec 30, 2025 10:52 PM
36 Comments
Quote from vid1900 View quoted comment :
Don't forget that these are not regular sharkbite fittings that just push together.

You need a crimper and rings to install this valve.
Good point for some one that doesn't know the difference.
Dec 30, 2025 11:17 PM
2.3K Comments
Joined Jul 2005
saintirishDec 30, 2025 11:17 PM
2.3K Comments
Quote from FishX View quoted comment :
You will need a crimping tool for this valve: Example [amazon.com]
Do the same tool and rings work for cpvc as pex?
Dec 31, 2025 12:38 AM
118 Comments
Joined Dec 2023
1More1Dec 31, 2025 12:38 AM
118 Comments
I can never trust a non-soldering copper pipe valve. Especially as a shut-off valve.

Sign up for a Slickdeals account to remove this ad.

Dec 31, 2025 12:41 AM
184 Comments
Joined Nov 2006
spider3455Dec 31, 2025 12:41 AM
184 Comments
Dead - Showing $8.99 for me

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

Related Searches

Home & Home ImprovementBuilding & Remodeling SuppliesOccasionsNew Year'sAmazon