This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
Reverse osmosis (RO) systems remove nearly all dissolved minerals from water, including beneficial ones like calcium and magnesium. This results in water that is very pure but often tastes flat or bland due to the lack of minerals. Additionally, the absence of minerals can make the water slightly acidic, with a pH typically between 5.0 and 6.5.
To improve taste and balance pH, an alkaline filter is added as a final stage in some RO systems. This filter reintroduces essential minerals such as calcium, magnesium, and potassium into the water. Doing so raises the pH to a more neutral or slightly alkaline level (typically 7.0–8.5), enhances flavor, and gives the water a smoother mouthfeel.
In short, the alkaline filter prevents flat water by restoring minerals removed during RO filtration, making the water more pleasant to drink and less acidic.
Reverse osmosis tips. Only use dow filmtec membranes. Everything else is worse and not worth savinga few bucks. Amazon sells the film tecs for 30.00. Ispring is a decent starter brand for kits. Tank and the autoshut off valve are the weakest link. Might switch them out ASAP. Bulk Reef Supply is your best friend for RO. They dont sell garbage. Pumps are silly IMO. I get 98-99% rejection without it. If you do get a pump, this one is crap. Get a flowtec or shurflo. The pressure tank, is most likely the first thing that breaks though, and it's very hard to get an American tank. USA Water Systems used to sell American tanks, but now it seems you have to buy the whole 500.00 us system to get the us tank. Pretty solid warranty though.
Our community has rated this post as helpful. If you agree, why not thank Artc8888
PLEASE Note the replacement filter will cost you $63 (set) + RO filter ($52)..... also, i prefer to have a clear canister, where I can visually monitor the degradation of the filter....
PLEASE Note the replacement filter will cost you $63 (set) + RO filter ($52)..... also, i prefer to have a clear canister, where I can visually monitor the degradation of the filter....
That's with almost any filtering system. The filters are the most expensive part because that's basically all it is and the rest of it is just a skeleton that holds the filters. This should be no surprise.
I was thinking of getting a RO system for a saltwater tank. The initial cost looks good but I think reviews complained about the motor failing and filter pricing. Anyone have a recommendation of what they use?
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank ben_r_
Quote
from Artc8888
:
PLEASE Note the replacement filter will cost you $63 (set) + RO filter ($52)..... also, i prefer to have a clear canister, where I can visually monitor the degradation of the filter....
Which RO system has clear canister filters?
2
4
Like
Helpful
Funny
Not helpful
Jan 7, 2026 1:41 PM
177 Comments
Joined Apr 2019
This comment has been rated as unhelpful by Slickdeals users.
Our community has rated this post as helpful. If you agree, why not thank pwnking
Reverse osmosis tips. Only use dow filmtec membranes. Everything else is worse and not worth savinga few bucks. Amazon sells the film tecs for 30.00. Ispring is a decent starter brand for kits. Tank and the autoshut off valve are the weakest link. Might switch them out ASAP. Bulk Reef Supply is your best friend for RO. They dont sell garbage. Pumps are silly IMO. I get 98-99% rejection without it. If you do get a pump, this one is crap. Get a flowtec or shurflo. The pressure tank, is most likely the first thing that breaks though, and it's very hard to get an American tank. USA Water Systems used to sell American tanks, but now it seems you have to buy the whole 500.00 us system to get the us tank. Pretty solid warranty though.
Reverse osmosis (RO) systems remove nearly all dissolved minerals from water, including beneficial ones like calcium and magnesium. This results in water that is very pure but often tastes flat or bland due to the lack of minerals. Additionally, the absence of minerals can make the water slightly acidic, with a pH typically between 5.0 and 6.5.
To improve taste and balance pH, an alkaline filter is added as a final stage in some RO systems. This filter reintroduces essential minerals such as calcium, magnesium, and potassium into the water. Doing so raises the pH to a more neutral or slightly alkaline level (typically 7.0–8.5), enhances flavor, and gives the water a smoother mouthfeel.
In short, the alkaline filter prevents flat water by restoring minerals removed during RO filtration, making the water more pleasant to drink and less acidic.
55
25
1
6
Like
Helpful
Funny
Not helpful
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
Top Comments
To improve taste and balance pH, an alkaline filter is added as a final stage in some RO systems. This filter reintroduces essential minerals such as calcium, magnesium, and potassium into the water. Doing so raises the pH to a more neutral or slightly alkaline level (typically 7.0–8.5), enhances flavor, and gives the water a smoother mouthfeel.
In short, the alkaline filter prevents flat water by restoring minerals removed during RO filtration, making the water more pleasant to drink and less acidic.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
182 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank NaPra
Our community has rated this post as helpful. If you agree, why not thank pn88
Our community has rated this post as helpful. If you agree, why not thank Artc8888
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank ben_r_
Our community has rated this post as helpful. If you agree, why not thank pwnking
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank fieldcar
To improve taste and balance pH, an alkaline filter is added as a final stage in some RO systems. This filter reintroduces essential minerals such as calcium, magnesium, and potassium into the water. Doing so raises the pH to a more neutral or slightly alkaline level (typically 7.0–8.5), enhances flavor, and gives the water a smoother mouthfeel.
In short, the alkaline filter prevents flat water by restoring minerals removed during RO filtration, making the water more pleasant to drink and less acidic.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!